This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

Dear Bret Aarden,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.0562. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[CP_MSG] [Tue May 30 21:51:40 2006] Trying to get 
'ftp://cpan.sunsite.ualberta.ca/pub/CPAN/authors/id/A/AA/AARDEN/Tk-ActivityBar/CHECKSUMS'
[CP_MSG] [Tue May 30 21:52:04 2006] Checksum matches for 
'Tk-ActivityBar-0.01.tar.gz'
[CP_MSG] [Tue May 30 21:52:21 2006] Extracted 'Tk-ActivityBar-0.01/'
[CP_MSG] [Tue May 30 21:52:21 2006] Extracted 'Tk-ActivityBar-0.01/demo/'
[CP_MSG] [Tue May 30 21:52:21 2006] Extracted 
'Tk-ActivityBar-0.01/demo/activitybar.pl'
[CP_MSG] [Tue May 30 21:52:21 2006] Extracted 'Tk-ActivityBar-0.01/lib/'
[CP_MSG] [Tue May 30 21:52:21 2006] Extracted 
'Tk-ActivityBar-0.01/lib/ActivityBar.pm'
[CP_MSG] [Tue May 30 21:52:21 2006] Extracted 'Tk-ActivityBar-0.01/Makefile.PL'
[CP_MSG] [Tue May 30 21:52:21 2006] Extracted 'Tk-ActivityBar-0.01/MANIFEST'
[CP_MSG] [Tue May 30 21:52:21 2006] Extracted 'Tk-ActivityBar-0.01/t/'
[CP_MSG] [Tue May 30 21:52:21 2006] Extracted 'Tk-ActivityBar-0.01/t/actbar.t'
[CP_MSG] [Tue May 30 21:52:23 2006] Extracted 'Tk::ActivityBar' to 
'/home/software/.cpanplus/5.8.3/build/Tk-ActivityBar-0.01'
[CP_MSG] [Tue May 30 21:52:56 2006] Writing Makefile for Tk::ActivityBar

[CP_MSG] [Tue May 30 21:52:59 2006] Manifying blib/man3/ActivityBar.3

[CP_ERROR] [Tue May 30 21:53:01 2006] MAKE TEST failed: Bad file descriptor 
PERL_DL_NONLAZY=1 /usr/local/perl/5.8.3/bin/perl "-MExtUtils::Command::MM" "-e" 
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/actbar....Can't locate Tk/ActivityBar.pm in @INC (@INC contains: 
/home/software/.cpanplus/5.8.3/build/Tk-ActivityBar-0.01/blib/lib 
/home/software/.cpanplus/5.8.3/build/Tk-ActivityBar-0.01/blib/arch 
/usr/local/share/perl/fix 
/usr/local/perl/5.8.3/lib/5.8.3/i686-linux-thread-multi 
/usr/local/perl/5.8.3/lib/5.8.3 
/usr/local/perl/5.8.3/lib/site_perl/5.8.3/i686-linux-thread-multi 
/usr/local/perl/5.8.3/lib/site_perl/5.8.3 /usr/local/perl/5.8.3/lib/site_perl 
/usr/local/share/perl/common .) at 
/usr/local/perl/5.8.3/lib/site_perl/5.8.3/i686-linux-thread-multi/Tk/widgets.pm 
line 14.
 at t/actbar.t line 5
BEGIN failed--compilation aborted at t/actbar.t line 5.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
FAILED--1 test script could be run, alas--no output ever seen
make: *** [test_dynamic] Error 255



MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Tk::ActivityBar

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'Bret Aarden ([EMAIL PROTECTED])',
    ... # other information
    PREREQ_PM   => {
        'Tk::ActivityBar'       => '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
        Tk::ProgressBar                   4.010

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

--

Summary of my perl5 (revision 5.0 version 8 subversion 3) configuration:
  Platform:
    osname=linux, osvers=2.4.20-8bigmem, archname=i686-linux-thread-multi
    uname='linux socrates 2.4.20-8bigmem #1 smp thu mar 13 17:32:29 est 2003 
i686 i686 i386 gnulinux '
    config_args='-Dcc=gcc -Doptimize=-g -Dusemymalloc=y 
-Dprefix=/usr/local/perl/5.8.3 -Dotherlibdirs=/usr/local/share/perl/common 
-Duseperlio -Dusethreads -Accflags=-DPERL_Y2KWARN 
-DAPPLLIB_EXP=\"/usr/local/share/perl/fix\" -DPERL_DEBUGGING_MSTATS -de'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=y, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS 
-DPERL_Y2KWARN -DAPPLLIB_EXP="/usr/local/share/perl/fix" 
-DPERL_DEBUGGING_MSTATS -DDEBUGGING -fno-strict-aliasing -I/usr/local/include 
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    optimize='-g',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DPERL_Y2KWARN 
-DAPPLLIB_EXP="/usr/local/share/perl/fix" -DPERL_DEBUGGING_MSTATS -DDEBUGGING 
-fno-strict-aliasing -I/usr/local/include -I/usr/include/gdbm'
    ccversion='', gccversion='3.2.2 20030222 (Red Hat Linux 3.2.2-5)', 
gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.2.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.2'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

Reply via email to