This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Ilya Martynov, This is a computer-generated error report created automatically by CPANPLUS, version 0.0562. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [CP_MSG] [Sun Jun 4 21:36:12 2006] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/authors/id/I/IL/ILYAM/CHECKSUMS' [CP_MSG] [Sun Jun 4 21:36:13 2006] Checksum matches for 'Mail-CheckUser-1.21.tar.gz' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/README' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/CheckUser.pm' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/MANIFEST' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/t/' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/t/timeout.t' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/t/smtp.t' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/t/wildcard.t' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/t/syntax.t' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/t/smtp-taint.t' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/t/check.pl' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/t/dns.t' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/Changes' [CP_MSG] [Sun Jun 4 21:36:13 2006] Extracted 'Mail-CheckUser-1.21/Makefile.PL' [CP_MSG] [Sun Jun 4 21:36:14 2006] Extracted 'Mail-CheckUser-1.21/TODO' [CP_MSG] [Sun Jun 4 21:36:14 2006] Extracted 'Mail-CheckUser-1.21/procmail/' [CP_MSG] [Sun Jun 4 21:36:14 2006] Extracted 'Mail-CheckUser-1.21/procmail/cufilter' [CP_MSG] [Sun Jun 4 21:36:14 2006] Extracted 'Mail-CheckUser-1.21/procmail/.procmailrc' [CP_MSG] [Sun Jun 4 21:36:14 2006] Extracted 'Mail::CheckUser' to '/root/.cpanplus/5.8.8/build/Mail-CheckUser-1.21' [CP_MSG] [Sun Jun 4 21:36:14 2006] Checking if your kit is complete... Looks good Writing Makefile for Mail::CheckUser [CP_MSG] [Sun Jun 4 21:36:16 2006] cp CheckUser.pm blib/lib/Mail/CheckUser.pm cp procmail/cufilter blib/script/cufilter /usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/cufilter Manifying blib/man1/cufilter.1 Manifying blib/man3/Mail::CheckUser.3pm [CP_ERROR] [Sun Jun 4 21:36:26 2006] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/dns...........ok t/smtp-taint....FAILED before any test output arrived t/smtp..........ok t/syntax........ok t/timeout.......ok t/wildcard......# Failed test 5 in t/check.pl at line 20 fail #5 # t/check.pl line 20 is: ok($ok); # Failed test 6 in t/check.pl at line 20 fail #6 # Failed test 8 in t/check.pl at line 20 fail #8 # Failed test 11 in t/check.pl at line 20 fail #11 # Failed test 12 in t/check.pl at line 20 fail #12 FAILED tests 5-6, 8, 11-12 Failed 5/13 tests, 61.54% okay Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/smtp-taint.t ?? ?? % ?? t/wildcard.t 13 5 38.46% 5-6 8 11-12 Failed 2/6 test scripts, 66.67% okay. 5/59 subtests failed, 91.53% okay. make: *** [test_dynamic] Error 255 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: IO::Handle 1.25 Net::DNS 0.57 Net::Ping 2.31 Net::SMTP 2.29 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.9-22.18.bz155725.elsmp, archname=i386-linux-thread-multi uname='linux hs20-bc1-6.build.redhat.com 2.6.9-22.18.bz155725.elsmp #1 smp thu nov 17 15:34:08 est 2005 i686 i686 i386 gnulinux ' config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables -Dversion=5.8.8 -Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto -Ud_endservent_r_proto -Ud_setservent_r_proto -Dinc_version_list=5.8.7 5.8.6 5.8.5 5.8.4 5.8.3 -Dscriptdir=/usr/bin' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables', cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='4.1.0 20060228 (Red Hat 4.1.0-1)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.90.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.90' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
