This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear FOOLFISH,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.061. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sun Jul 23 21:20:37 2006] Trying to get
'file://aliens/cpan/minicpan/authors/id/F/FO/FOOLFISH/CHECKSUMS'
[MSG] [Sun Jul 23 21:20:37 2006] Checksum matches for
'EasyDBAccess-3.0.4.tar.gz'
[MSG] [Sun Jul 23 21:20:38 2006] Extracted 'EasyDBAccess-3.0.4/'
[MSG] [Sun Jul 23 21:20:38 2006] Extracted 'EasyDBAccess-3.0.4/LICENSE'
[MSG] [Sun Jul 23 21:20:38 2006] Extracted 'EasyDBAccess-3.0.4/META.yml'
[MSG] [Sun Jul 23 21:20:38 2006] Extracted 'EasyDBAccess-3.0.4/Makefile.PL'
[MSG] [Sun Jul 23 21:20:38 2006] Extracted 'EasyDBAccess-3.0.4/INSTALL'
[MSG] [Sun Jul 23 21:20:38 2006] Extracted 'EasyDBAccess-3.0.4/t/'
[MSG] [Sun Jul 23 21:20:38 2006] Extracted 'EasyDBAccess-3.0.4/t/EasyDBAccess.t'
[MSG] [Sun Jul 23 21:20:38 2006] Extracted 'EasyDBAccess-3.0.4/EasyDBAccess.pm'
[MSG] [Sun Jul 23 21:20:38 2006] Extracted 'EasyDBAccess-3.0.4/CHANGES'
[MSG] [Sun Jul 23 21:20:38 2006] Extracted 'EasyDBAccess-3.0.4/README'
[MSG] [Sun Jul 23 21:20:38 2006] Extracted 'EasyDBAccess-3.0.4/MANIFEST'
[MSG] [Sun Jul 23 21:20:38 2006] Extracted 'EasyDBAccess' to 'C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\EasyDBAccess-3.0.4'
[MSG] [Sun Jul 23 21:20:39 2006] Checking if your kit is complete...
Looks good
Writing Makefile for EasyDBAccess
[MSG] [Sun Jul 23 21:20:39 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Sun Jul 23 21:20:41 2006] cp EasyDBAccess.pm blib\lib\EasyDBAccess.pm
Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation. All rights reserved.
[ERROR] [Sun Jul 23 21:20:43 2006] MAKE TEST failed: No such file or directory
C:\perl\5.8.5\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib\lib', 'blib\arch')" t\EasyDBAccess.t
t\EasyDBAccess....dubious
Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 13, 15-16, 18-229
Failed 215/229 tests, 6.11% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t\EasyDBAccess.t 2 512 229 426 186.03% 13 15-16 18-229
Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation. All rights reserved.
# Failed test 13 in t\EasyDBAccess.t at line 554
# t\EasyDBAccess.t line 554 is:
Test::ok($false);
# Failed test 15 in t\EasyDBAccess.t at line 554 fail #2
# Failed test 16 in t\EasyDBAccess.t at line 554 fail #3
# Failed test 18 in t\EasyDBAccess.t at line 554 fail #4
install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains:
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\EasyDBAccess-3.0.4\blib\lib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\EasyDBAccess-3.0.4\blib\arch
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Carp-Always-0.06\blib\lib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Carp-Always-0.06\blib\arch
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Carp-Always-0.06\blib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Test-Simple-0.64\blib\lib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Test-Simple-0.64\blib\arch
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Test-Simple-0.64\blib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Devel-Caller-0.11\blib\lib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Devel-Caller-0.11\blib\arch
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Devel-Caller-0.11\blib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Devel-LexAlias-0.04\blib\lib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Devel-LexAlias-0.04\blib\arch
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Devel-LexAlias-0.04\blib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Data-Bind-0.27\blib\lib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Data-Bind-0.27\blib\arch
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Data-Bind-0.27\blib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Module-Compile-0.18\blib\lib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Module-Compile-0.18\blib\arch
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Module-Compile-0.18\blib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Data-Dump-1.06\blib\lib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Data-Dump-1.06\blib\arch
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Data-Dump-1.06\blib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Module-Pluggable-3.1\blib\lib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Module-Pluggable-3.1\blib\arch
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Module-Pluggable-3.1\blib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Catalyst-Runtime-5.7001\blib\lib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Catalyst-Runtime-5.7001\blib\arch
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Catalyst-Runtime-5.7001\blib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\EasyDBAccess-3.0.5\blib\lib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\EasyDBAccess-3.0.5\blib\arch
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\EasyDBAccess-3.0.5\blib
C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\EasyDBAccess-3.0.4\blib
C:/perl/5.8.5/lib C:/perl/site/5.8.5/lib .) at (eval 9) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Mock, Proxy, SQLite, SQLite2, Sponge.
at C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\EasyDBAccess-3.0.4\blib\lib/EasyDBAccess.pm
line 307
Failed 1/1 test scripts, 0.00% okay. 215/229 subtests failed, 6.11% okay.
NMAKE : fatal error U1077: 'C:\perl\5.8.5\bin\perl.exe' : return code '0x2'
Stop.
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
DBD::mysql
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'FOOLFISH ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'DBD::mysql' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
Platform:
osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread
uname=''
config_args='undef'
hint=recommended, useposix=true, d_sigaction=undef
usethreads=undef use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cl', ccflags ='-nologo -GF -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE
-DNO_STRICT -DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS
-DUSE_PERLIO -DPERL_MSVCRT_READFIX',
optimize='-MD -Zi -DNDEBUG -O1',
cppflags='-DWIN32'
ccversion='', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64',
lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf
-libpath:"c:\perl\5.8.5\lib\CORE" -machine:x86'
libpth="C:\Programme\Microsoft Visual C++ Toolkit 2003\lib"
libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib
uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib
msvcrt.lib
perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib
uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib
msvcrt.lib
libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib
gnulibc_version='undef'
Dynamic Linking:
dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf
-libpath:"c:\perl\5.8.5\lib\CORE" -machine:x86'
