This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear ANDK, This is a computer-generated error report created automatically by CPANPLUS, version 0.074. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Oct 7 12:57:55 2006] Trying to get 'http://www.cpan.org/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-Fails-1.02.tar.gz' [MSG] [Sat Oct 7 12:57:55 2006] Trying to get 'http://www.cpan.org/authors/id/A/AN/ANDK/CHECKSUMS' [MSG] [Sat Oct 7 12:57:57 2006] Checksum matches for 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02.tar.gz' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/t/' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/t/00_load.t' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/MANIFEST' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/META.yml' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/Changes' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/lib/' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/lib/CPAN/' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/lib/CPAN/Test/' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/lib/CPAN/Test/Dummy/' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/lib/CPAN/Test/Dummy/Perl5/' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/lib/CPAN/Test/Dummy/Perl5/Build/' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/lib/CPAN/Test/Dummy/Perl5/Build/Fails.pm' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/README' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN-Test-Dummy-Perl5-Build-Fails-1.02/Build.PL' [MSG] [Sat Oct 7 12:57:58 2006] Extracted 'CPAN::Test::Dummy::Perl5::Build::Fails' to '/home/chris/.cpanplus/5.8.7/build/CPAN-Test-Dummy-Perl5-Build-Fails-1.02' [ERROR] [Sat Oct 7 12:57:58 2006] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install! [MSG] [Sat Oct 7 12:57:58 2006] No 'Makefile.PL' found - attempting to generate one [MSG] [Sat Oct 7 12:57:59 2006] Checking if your kit is complete... Looks good Writing Makefile for CPAN::Test::Dummy::Perl5::Build::Fails [MSG] [Sat Oct 7 12:57:59 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Oct 7 12:58:02 2006] cp lib/CPAN/Test/Dummy/Perl5/Build/Fails.pm blib/lib/CPAN/Test/Dummy/Perl5/Build/Fails.pm Manifying blib/man3/CPAN::Test::Dummy::Perl5::Build::Fails.3 [ERROR] [Sat Oct 7 12:58:03 2006] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_load....The following failure is intentional in order to trigger the corresponding action of the installer program on distros with failing tests FAILED test 2 Failed 1/2 tests, 50.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/00_load.t 2 1 2 Failed 1/1 test scripts. 1/2 subtests failed. Files=1, Tests=2, 0 wallclock secs ( 0.06 cusr + 0.03 csys = 0.09 CPU) *** Error code 35 Stop in /usr/home/chris/.cpanplus/5.8.7/build/CPAN-Test-Dummy-Perl5-Build-Fails-1.02. Failed 1/1 test programs. 1/2 subtests failed. ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 8 subversion 7) configuration: Platform: osname=freebsd, osvers=6.0-release, archname=alpha-freebsd uname='freebsd alpha.bingosnet.co.uk 6.0-release freebsd 6.0-release #0: thu nov 3 01:10:43 utc 2005 [EMAIL PROTECTED]:usrobjusrsrcsysgeneric alpha ' config_args='-sde -Dprefix=/usr/local -Darchlib=/usr/local/lib/perl5/5.8.7/mach -Dprivlib=/usr/local/lib/perl5/5.8.7 -Dman3dir=/usr/local/lib/perl5/5.8.7/perl/man/man3 -Dman1dir=/usr/local/man/man1 -Dsitearch=/usr/local/lib/perl5/site_perl/5.8.7/mach -Dsitelib=/usr/local/lib/perl5/site_perl/5.8.7 -Dscriptdir=/usr/local/bin -Dsiteman3dir=/usr/local/lib/perl5/5.8.7/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Ui_malloc -Ui_iconv -Uinstallusrbinperl -Dcc=cc -Duseshrplib -Dccflags=-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.7/BSDPAN" -Doptimize=-O2 -fno-strict-aliasing -pipe -mcpu=ev4 -mtune=ev5 -mieee -Ud_dosuid -Ui_gdbm -Dusethreads=n -Dusemymalloc=y -Duse64bitint' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=undef usemymalloc=y, bincompat5005=undef Compiler: cc='cc', ccflags ='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.7/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe', optimize='-O2 -fno-strict-aliasing -pipe -mcpu=ev4 -mtune=ev5 -mieee', cppflags='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.7/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe' ccversion='', gccversion='3.4.4 [FreeBSD] 20050518', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags ='-pthread -Wl,-E' libpth=/usr/lib libs=-lm -lcrypt -lutil perllibs=-lm -lcrypt -lutil libc=, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -Wl,-R/usr/local/lib/perl5/5.8.7/mach/CORE' cccdlflags='-DPIC -fPIC', lddlflags='-shared '
