This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Benjamin Trott, This is a computer-generated test report for Crypt-OpenPGP-1.03, created automatically by CPAN::Reporter, version 0.35, and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address. Thank you for uploading your work to CPAN. However, it appears that your distribution tests are not fully supported on this machine, either due to operating system limitations or missing prerequisite modules. Sections of this report: * Tester comments * Prerequisites * Environment and other context * Test output ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ---------------- ---- -------- Compress::Zlib 0 2.001 Crypt::Blowfish 0 2.10 Crypt::CAST5_PP 0 1.04 Crypt::DES_EDE3 0 0.01 Crypt::DSA 0 0.14 Crypt::IDEA 0 0 Crypt::Rijndael 0 0.04 Crypt::RIPEMD160 0 0.04 ! Crypt::RSA 0 n/a Crypt::Twofish 2.00 2.12 Data::Buffer 0.04 0.04 Digest::MD5 0 2.36 Digest::SHA1 0 2.11 LWP::UserAgent 0 2.033 Math::Pari 0 2.010709 MIME::Base64 0 3.07 URI::Escape 0 3.28 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = C PATH = /opt/sfw/bin:/opt/sfw/cups/bin:/opt/sfw/cups/sbin:/usr/ccs/bin:/opt/SUNWspro/bin:/usr/sfw/bin:/usr/dt/bin:/usr/bin:/usr/sbin:/etc:. PERL5LIB = SHELL = /bin/bash TERM = dtterm Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = perl UID: $< = 0 EUID: $> = 0 GID: $( = 0 12 9 8 7 6 5 4 3 2 1 0 EGID: $) = 0 12 9 8 7 6 5 4 3 2 1 0 Perl module toolchain versions installed: Module Have ------------------- ------- CPAN 1.8802 Cwd 3.23 ExtUtils::CBuilder n/a ExtUtils::Command 1.09_01 ExtUtils::Install 1.41 ExtUtils::MakeMaker 6.31 ExtUtils::Manifest 1.48 ExtUtils::ParseXS n/a File::Spec 3.23 Module::Build n/a Module::Signature 0.55 Test::Harness 2.64 Test::More 0.65 version n/a ------------------------------ TEST OUTPUT ------------------------------ Output from '/usr/ccs/bin/make test': /usr/bin/perl Makefile.PL --config= --installdeps=Data::Buffer,0.04,Math::Pari,0,Crypt::DSA,0,Crypt::RSA,0,Crypt::IDEA,0,Crypt::DES_EDE3,0,Crypt::Rijndael,0,Crypt::CAST5_PP,0,Crypt::RIPEMD160,0,Crypt::IDEA,0,Crypt::DES_EDE3,0,Crypt::CAST5_PP,0,Crypt::Blowfish,0,Crypt::Twofish,2.00,Crypt::Rijndael,0,Crypt::RIPEMD160,0 *** Installing dependencies... Dispatching deprecated method 'CPAN::Config::load' to CPAN::HandleConfigCPAN: File::HomeDir loaded ok *** Installing Crypt::RSA... [1;34;47mCPAN: Term::ANSIColor loaded ok [0m[1;34;47mCPAN: Storable loaded ok [0m[1;34;47mGoing to read /.cpan/Metadata [0m[1;34;47m Database was generated on Wed, 15 Nov 2006 21:24:14 GMT [0m[1;34;47mRunning install for module Crypt::RSA [0m[1;34;47mRunning make for V/VI/VIPUL/Crypt-RSA-1.57.tar.gz [0m[1;34;47mCPAN: Digest::SHA loaded ok [0m[1;34;47mCPAN: Module::Signature loaded ok [0mCannot use GnuPG or Crypt::OpenPGP, please install either one first! [1;34;47mSignature for /.cpan/sources/authors/id/V/VI/VIPUL/CHECKSUMS ok [0m[1;34;47mCPAN: Compress::Zlib loaded ok [0m[1;34;47mChecksum for /.cpan/sources/authors/id/V/VI/VIPUL/Crypt-RSA-1.57.tar.gz ok [0m[1;34;47mScanning cache /.cpan/build for sizes [0mx Crypt-RSA-1.57, 0 bytes, 0 tape blocks x Crypt-RSA-1.57/extradocs, 0 bytes, 0 tape blocks x Crypt-RSA-1.57/extradocs/crypt-rsa-interoperablity.pod, 1455 bytes, 3 tape blocks x Crypt-RSA-1.57/extradocs/crypt-rsa-interoperablity-template.pod, 807 bytes, 2 tape blocks x Crypt-RSA-1.57/t, 0 bytes, 0 tape blocks x Crypt-RSA-1.57/t/10-keygen.t, 1078 bytes, 3 tape blocks x Crypt-RSA-1.57/t/05-primitives.t, 1109 bytes, 3 tape blocks x Crypt-RSA-1.57/t/03-random_octet.t, 613 bytes, 2 tape blocks x Crypt-RSA-1.57/t/01-i2osp.t, 964 bytes, 2 tape blocks x Crypt-RSA-1.57/t/14-ss-pkcs1v15.t, 2294 bytes, 5 tape blocks x Crypt-RSA-1.57/t/04-octet_xor.t, 711 bytes, 2 tape blocks x Crypt-RSA-1.57/t/13-es-pkcs1v15.t, 2162 bytes, 5 tape blocks x Crypt-RSA-1.57/t/07-pss.t, 2096 bytes, 5 tape blocks x Crypt-RSA-1.57/t/02-os2ip.t, 1337 bytes, 3 tape blocks x Crypt-RSA-1.57/t/15-benchmark.t, 3552 bytes, 7 tape blocks x Crypt-RSA-1.57/t/11-wrapper.t, 3526 bytes, 7 tape blocks x Crypt-RSA-1.57/t/12-versioning.t, 648 bytes, 2 tape blocks x Crypt-RSA-1.57/t/00-errorhandler.t, 1159 bytes, 3 tape blocks x Crypt-RSA-1.57/t/09-publickey.t, 1612 bytes, 4 tape blocks x Crypt-RSA-1.57/t/08-secretkey.t, 2030 bytes, 4 tape blocks x Crypt-RSA-1.57/t/06-oaep.t, 1057 bytes, 3 tape blocks x Crypt-RSA-1.57/Changes, 8480 bytes, 17 tape blocks x Crypt-RSA-1.57/MANIFEST, 949 bytes, 2 tape blocks x Crypt-RSA-1.57/TODO, 5695 bytes, 12 tape blocks x Crypt-RSA-1.57/lib, 0 bytes, 0 tape blocks x Crypt-RSA-1.57/lib/Crypt, 0 bytes, 0 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA, 0 bytes, 0 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/Key, 0 bytes, 0 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/Key/Private.pm, 8901 bytes, 18 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/Key/Public.pm, 3717 bytes, 8 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/Key/Public, 0 bytes, 0 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/Key/Public/SSH.pm, 1192 bytes, 3 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/Key/Private, 0 bytes, 0 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/Key/Private/SSH.pm, 4625 bytes, 10 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/Primitives.pm, 3635 bytes, 8 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/SS, 0 bytes, 0 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/SS/PSS.pm, 7479 bytes, 15 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/SS/PKCS1v15.pm, 6246 bytes, 13 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/Key.pm, 6674 bytes, 14 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/ES, 0 bytes, 0 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/ES/PKCS1v15.pm, 5513 bytes, 11 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/ES/OAEP.pm, 8687 bytes, 17 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/DataFormat.pm, 4678 bytes, 10 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/Errorhandler.pm, 3114 bytes, 7 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA/Debug.pm, 1677 bytes, 4 tape blocks x Crypt-RSA-1.57/lib/Crypt/RSA.pm, 17732 bytes, 35 tape blocks x Crypt-RSA-1.57/META.yml, 836 bytes, 2 tape blocks x Crypt-RSA-1.57/ARTISTIC, 5250 bytes, 11 tape blocks x Crypt-RSA-1.57/README, 877 bytes, 2 tape blocks x Crypt-RSA-1.57/Makefile.PL, 1336 bytes, 3 tape blocks [1;34;47mRemoving previously used /.cpan/build/Crypt-RSA-1.57 [0m[1;31;47mPackage came without SIGNATURE [0m[1;34;47m CPAN.pm: Going to build V/VI/VIPUL/Crypt-RSA-1.57.tar.gz [0mWarning: prerequisite Tie::EncryptedHash 0 not found. Checking if your kit is complete... Looks good Writing Makefile for Crypt::RSA [1;34;47m---- Unsatisfied dependencies detected during [V/VI/VIPUL/Crypt-RSA-1.57.tar.gz] ----- [0m[1;34;47m Tie::EncryptedHash [0m[1;34;47mShall I follow them and prepend them to the queue of modules we are processing right now? [yes] [0m[1;34;47mRunning make test [0m[1;34;47m Delayed until after prerequisites [0m[1;34;47mRunning make install [0m[1;34;47m Delayed until after prerequisites [0m*** Crypt::RSA installation failed. *** ExtUtils::AutoInstall installation finished. PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/00-compile.t t/01-util.t t/02-buffer.t t/03-3des.t t/04-armour.t t/05-packets.t t/06-cipher.t t/07-digest.t t/08-compress.t t/09-config.t t/10-keyring.t t/11-encrypt.t t/12-sign.t t/13-keygen.t t/00-compile.....ok t/01-util........ok t/02-buffer......ok t/03-3des........ok t/04-armour......ok t/05-packets.....ok t/06-cipher......ok t/07-digest......ok t/08-compress....ok t/09-config......ok t/10-keyring.....ok t/11-encrypt.....Use of uninitialized value in concatenation (.) or string at lib/Crypt/OpenPGP/SKSessionKey.pm line 31. Use of uninitialized value in concatenation (.) or string at lib/Crypt/OpenPGP/SKSessionKey.pm line 31. Can't locate object method "all_props" via package "Crypt::OpenPGP::Key::Public::RSA" at lib/Crypt/OpenPGP/Key.pm line 25. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 25-51 Failed 27/51 tests, 47.06% okay t/12-sign........ok t/13-keygen......Unsupported algorithm 'RSA': Can't locate Crypt/RSA/Key/Public.pm in @INC (@INC contains: /.cpan/build/Crypt-OpenPGP-1.03/blib/lib /.cpan/build/Crypt-OpenPGP-1.03/blib/arch /usr/perl5/5.8.4/lib/sun4-solaris-64int /usr/perl5/5.8.4/lib/sun4-solaris-64int /usr/perl5/5.8.4/lib /usr/perl5/site_perl/5.8.4/sun4-solaris-64int /usr/perl5/site_perl/5.8.4/sun4-solaris-64int /usr/perl5/site_perl/5.8.4 /usr/perl5/site_perl/5.8.4/sun4-solaris-64int /usr/perl5/site_perl/5.8.4 /usr/perl5/site_perl /usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int /usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int /usr/perl5/vendor_perl/5.8.4 /usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int /usr/perl5/vendor_perl/5.8.4 /usr/perl5/vendor_perl . /usr/perl5/5.8.4/lib/sun4-solaris-64int /usr/perl5/5.8.4/lib /usr/perl5/site_perl/5.8.4/sun4-solaris-64int /usr/perl5/site_perl/5.8.4 /usr/perl5/site_perl /usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int /usr/perl5/vendor_perl/5.8.4 /usr/perl5/vendor_perl .) a t /.cpan/build/Crypt-OpenPGP-1.03/blib/lib/Crypt/OpenPGP/Key/Public/RSA.pm line 6. BEGIN failed--compilation aborted at /.cpan/build/Crypt-OpenPGP-1.03/blib/lib/Crypt/OpenPGP/Key/Public/RSA.pm line 6. Compilation failed in require at (eval 7) line 1. BEGIN failed--compilation aborted at (eval 7) line 1. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1-28 Failed 28/28 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/11-encrypt.t 255 65280 51 54 25-51 t/13-keygen.t 2 512 28 56 1-28 Failed 2/14 test scripts. 55/327 subtests failed. Files=14, Tests=327, 298 wallclock secs (295.53 cusr + 1.45 csys = 296.98 CPU) Failed 2/14 test programs. 55/327 subtests failed. *** Error code 2 make: Fatal error: Command failed for target `test_dynamic' -- Summary of my perl5 (revision 5 version 8 subversion 4) configuration: Platform: osname=solaris, osvers=2.10, archname=sun4-solaris-64int uname='sunos localhost 5.10 sun4u sparc SUNW,Ultra-2' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_TS_ERRNO', optimize='-xO3 -xspace -xildoff', cppflags='' ccversion='Sun WorkShop', gccversion='', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags ='' libpth=/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -ldl -lm -lc perllibs=-lsocket -lnsl -ldl -lm -lc libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-R /usr/perl5/5.8.4/lib/sun4-solaris-64int/CORE' cccdlflags='-KPIC', lddlflags='-G'
