This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

Dear Jos Boumans,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.074. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sun Dec  3 05:11:12 2006] 
### IMPORTANT! ######################################################
    
    
As of CPANPLUS 0.070, configuration during 'perl Makefile.PL'
is no longer required. A default config is now shipped that
should work out of the box on most machines, for priviliged
and unprivileged users.

If you wish to configure CPANPLUS to your environment, you can 
either do that from the interactive shell after installation:

    $ cpanp
    CPAN Terminal> s conf user      # per user config
    CPAN Terminal> s conf system    # system wide config
    
Or you can invoke this program as follows, to do it now:

    $ /usr/local/bin/perl Makefile.PL --setup      

This also means that any config created by any CPANPLUS older
than 0.070 will no longer work, and you are required to 
reconfigure. See the ChangeLog file for details.

We appologize for the inconvenience.
    

### PLEASE NOTE ###################################################

Since CPANPLUS 0.050 has a few prerequisites that are not core
perl (yet), they are bundled with the distribution for boot-
strapping purposes.

You should install these prerequisites before continueing to
install CPANPLUS. You can use the bootstrapped CPANPLUS to do
this for you with the following command:

    /usr/local/bin/perl bin/cpanp-boxed -i Bundle::CPANPLUS::Dependencies

Or let your package manager take care of it.

###################################################################
    
    
Writing Makefile for CPANPLUS

[MSG] [Sun Dec  3 05:11:16 2006] cp bin/cpanp-run-perl 
blib/script/cpanp-run-perl
/usr/local/bin/perl -Iinc "-MExtUtils::MY" -e "MY->fixin(shift)" 
blib/script/cpanp-run-perl
cp bin/cpanp-boxed blib/script/cpanp-boxed
/usr/local/bin/perl -Iinc "-MExtUtils::MY" -e "MY->fixin(shift)" 
blib/script/cpanp-boxed
cp bin/cpan2dist blib/script/cpan2dist
/usr/local/bin/perl -Iinc "-MExtUtils::MY" -e "MY->fixin(shift)" 
blib/script/cpan2dist
cp bin/cpanp blib/script/cpanp
/usr/local/bin/perl -Iinc "-MExtUtils::MY" -e "MY->fixin(shift)" 
blib/script/cpanp
Manifying blib/man1/cpan2dist.1
Manifying blib/man1/cpanp.1
Manifying blib/man3/CPANPLUS::Backend::RV.3
Manifying blib/man3/CPANPLUS::Shell::Default.3
Manifying blib/man3/CPANPLUS::Module::Author.3
Manifying blib/man3/CPANPLUS::Module.3
Manifying blib/man3/CPANPLUS::inc.3
Manifying blib/man3/CPANPLUS::Internals::Source.3
Manifying blib/man3/CPANPLUS::Shell.3
Manifying blib/man3/CPANPLUS::Internals::Fetch.3
Manifying blib/man3/CPANPLUS::Internals.3
Manifying blib/man3/CPANPLUS::Dist::MM.3
Manifying blib/man3/CPANPLUS::Module::Checksums.3
Manifying blib/man3/CPANPLUS::Dist.3
Manifying blib/man3/CPANPLUS::Shell::Classic.3
Manifying blib/man3/CPANPLUS::Hacking.3
Manifying blib/man3/CPANPLUS::Configure.3
Manifying blib/man3/CPANPLUS.3
Manifying blib/man3/CPANPLUS::Backend.3
Manifying blib/man3/CPANPLUS::Internals::Search.3
Manifying blib/man3/CPANPLUS::Shell::Default::Plugins::Remote.3
Manifying blib/man3/CPANPLUS::Internals::Extract.3
Manifying blib/man3/CPANPLUS::Dist::Sample.3
Manifying blib/man3/CPANPLUS::Internals::Report.3
Manifying blib/man3/CPANPLUS::Error.3
Manifying blib/man3/CPANPLUS::Module::Fake.3
Manifying blib/man3/CPANPLUS::FAQ.3
Manifying blib/man3/CPANPLUS::Module::Author::Fake.3
Manifying blib/man3/CPANPLUS::Shell::Default::Plugins::HOWTO.3
Manifying blib/man3/CPANPLUS::Dist::Base.3
Manifying blib/man3/CPANPLUS::Internals::Utils.3
Manifying blib/man3/CPANPLUS::Shell::Default::Plugins::Source.3

[ERROR] [Sun Dec  3 05:12:21 2006] MAKE TEST failed: No such file or directory 
PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e" 
"test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/00_CPANPLUS-Inc....................ok
t/00_CPANPLUS-Internals-Utils........ok
t/01_CPANPLUS-Configure..............ok
t/02_CPANPLUS-Internals..............ok
t/03_CPANPLUS-Internals-Source.......ok
t/04_CPANPLUS-Module.................ok
        11/84 skipped: various reasons
t/05_CPANPLUS-Internals-Fetch........ok
t/06_CPANPLUS-Internals-Constants....ok
t/07_CPANPLUS-Internals-Extract......ok
t/08_CPANPLUS-Backend................Deep recursion on subroutine 
"Object::Accessor::AUTOLOAD" at 
/Users/cogent/.cpanplus/5.8.8/build/CPANPLUS-0.076/t/../lib/CPANPLUS/Backend/RV.pm
 line 113.
Deep recursion on subroutine "Object::Accessor::___autoload" at 
/usr/local/lib/perl5/site_perl/5.8.8/Object/Accessor.pm line 408.
Deep recursion on subroutine "CPANPLUS::Backend::RV::_ok" at 
/usr/local/lib/perl5/site_perl/5.8.8/Object/Accessor.pm line 476.
dubious
        Test returned status 0 (wstat 11, 0xb)
t/09_CPANPLUS-Internals-Search.......ok
t/10_CPANPLUS-Error..................ok
t/19_CPANPLUS-Dist...................ok
t/20_CPANPLUS-Dist-MM................# 
# Sorry, installing into your real perl dir, rather than our test area
# since ExtUtils::Installed does not probe for .packlists in other dirs
# than those in %Config. See bug #6871 on rt.cpan.org for details
# Note: 'sudo' might ask for your password to do the install test
ok
t/21_CPANPLUS-Dist-No-Build..........ok
t/40_CPANPLUS-Internals-Report.......ok
Failed Test             Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/08_CPANPLUS-Backend.t    0    11    ??   ??  ??
11 subtests skipped.
Failed 1/16 test scripts. -83/917 subtests failed.
Files=16, Tests=917, 64 wallclock secs (29.77 cusr + 19.00 csys = 48.77 CPU)
Failed 1/16 test programs. -83/917 subtests failed.
make: *** [test_dynamic] Error 25


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
        Archive::Extract                   0.14
        Archive::Tar                       1.30
        CPANPLUS::Dist::Build              0.04
        File::Fetch                        0.08
        File::Spec                         3.19
        IO::Zlib                           1.04
        IPC::Cmd                           0.36
        Locale::Maketext::Simple           0.18
        Log::Message                       0.01
        Module::CoreList                   2.08
        Module::Load                       0.10
        Module::Load::Conditional          0.12
        Module::Loaded                     0.01
        Module::Pluggable                   3.1
        Object::Accessor                   0.30
        Package::Constants                 0.01
        Params::Check                      0.25
        Term::UI                           0.12
        Test::Harness                      2.62
        Test::More                         0.64

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=darwin, osvers=8.7.0, archname=darwin-thread-multi-64int-2level
    uname='darwin epiphany 8.7.0 darwin kernel version 8.7.0: fri may 26 
15:20:53 pdt 2006; root:xnu-792.6.76.obj~1release_ppc power macintosh powerpc '
    config_args='-Dusethreads -Duse64bitint -Duseshrplib 
-Dlocincpth=/usr/local/include -Dloclibpth=/usr/local/lib -des'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp 
-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include',
    optimize='-O3',
    cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp 
-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5341)', 
gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-ldbm -ldb -ldl -lm -lc
    perllibs=-ldl -lm -lc
    libc=/usr/lib/libc.dylib, so=dylib, useshrplib=true, libperl=libperl.dylib
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup 
-L/usr/local/lib'

Reply via email to