This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

Dear ECALDER,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.076. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Mon Dec  4 16:18:00 2006] Trying to get 
'http://www.cpan.org/authors/id/E/EC/ECALDER/POE-Component-Player-Mpg123-1.2.tar.gz'
[MSG] [Mon Dec  4 16:18:00 2006] Trying to get 
'http://www.cpan.org/authors/id/E/EC/ECALDER/CHECKSUMS'
[MSG] [Mon Dec  4 16:18:01 2006] Checksum matches for 
'POE-Component-Player-Mpg123-1.2.tar.gz'
[MSG] [Mon Dec  4 16:18:01 2006] Extracted 'POE-Component-Player-Mpg123-1.2/'
[MSG] [Mon Dec  4 16:18:01 2006] Extracted 
'POE-Component-Player-Mpg123-1.2/README'
[MSG] [Mon Dec  4 16:18:01 2006] Extracted 
'POE-Component-Player-Mpg123-1.2/Makefile.PL'
[MSG] [Mon Dec  4 16:18:01 2006] Extracted 
'POE-Component-Player-Mpg123-1.2/Changes'
[MSG] [Mon Dec  4 16:18:01 2006] Extracted 
'POE-Component-Player-Mpg123-1.2/MANIFEST'
[MSG] [Mon Dec  4 16:18:01 2006] Extracted 
'POE-Component-Player-Mpg123-1.2/test.pl'
[MSG] [Mon Dec  4 16:18:02 2006] Extracted 
'POE-Component-Player-Mpg123-1.2/Mpg123.pm'
[MSG] [Mon Dec  4 16:18:02 2006] Extracted 'POE::Component::Player::Mpg123' to 
'/home/chris/.cpanplus/5.8.7/build/POE-Component-Player-Mpg123-1.2'
[MSG] [Mon Dec  4 16:18:03 2006] Checking if your kit is complete...
Looks good
Warning: prerequisite POE::Component::Child 1.16 not found.
Writing Makefile for POE::Component::Player::Mpg123

[MSG] [Mon Dec  4 16:18:03 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Mon Dec  4 16:18:03 2006] Module 'POE::Component::Player::Mpg123' 
requires 'POE::Component::Child' version '1.16' to be installed 
[MSG] [Mon Dec  4 16:18:03 2006] Trying to get 
'http://www.cpan.org/authors/id/E/EC/ECALDER/CHECKSUMS'
[MSG] [Mon Dec  4 16:18:03 2006] Checksum matches for 
'POE-Component-Child-1.39.tar.gz'
[MSG] [Mon Dec  4 16:18:04 2006] Extracted 'POE-Component-Child-1.39/'
[MSG] [Mon Dec  4 16:18:04 2006] Extracted 'POE-Component-Child-1.39/echosrv'
[MSG] [Mon Dec  4 16:18:04 2006] Extracted 'POE-Component-Child-1.39/test.pl'
[MSG] [Mon Dec  4 16:18:04 2006] Extracted 'POE-Component-Child-1.39/Changes'
[MSG] [Mon Dec  4 16:18:04 2006] Extracted 'POE-Component-Child-1.39/MANIFEST'
[MSG] [Mon Dec  4 16:18:04 2006] Extracted 'POE-Component-Child-1.39/Child.pm'
[MSG] [Mon Dec  4 16:18:04 2006] Extracted 
'POE-Component-Child-1.39/Makefile.PL'
[MSG] [Mon Dec  4 16:18:04 2006] Extracted 'POE-Component-Child-1.39/LICENSE'
[MSG] [Mon Dec  4 16:18:04 2006] Extracted 'POE-Component-Child-1.39/README'
[MSG] [Mon Dec  4 16:18:04 2006] Extracted 'POE::Component::Child' to 
'/home/chris/.cpanplus/5.8.7/build/POE-Component-Child-1.39'
[MSG] [Mon Dec  4 16:18:05 2006] Writing Makefile for POE::Component::Child

[MSG] [Mon Dec  4 16:18:05 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Mon Dec  4 16:18:06 2006] Manifying blib/man3/POE::Component::Child.3

[MSG] [Mon Dec  4 16:18:10 2006] MAKE TEST passed: PERL_DL_NONLAZY=1 
/usr/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..19
ok 1 - use PoCo::Child
ok 2 - [1] init - non-interactive
ok 3 - [2] init - interactive
ok 4 - [3] init - other
ok 5 - [4] init - pipe close
ok 6 - session created
ok 7 - [1]: standard output
ok 8 - [3]: dir change
ok 9 - [4]: child talks
ok 10 - [2]: client write tested
ok 11 - [2]: callback references
ok 12 - [2]: quit method
ok 13 - [5]: done
ok 14 - [1]: standard error
ok 15 - [1]: done event
ok 16 - [2]: killed
ok 17 - [1]: died tested
ok 18 - dir change restored
ok 19 - all tests successful

[MSG] [Mon Dec  4 16:18:11 2006] Ok, not sending test report
[MSG] [Mon Dec  4 16:18:14 2006] cp Mpg123.pm 
blib/lib/POE/Component/Player/Mpg123.pm
Manifying blib/man3/POE::Component::Player::Mpg123.3

[ERROR] [Mon Dec  4 16:18:18 2006] MAKE TEST failed:  PERL_DL_NONLAZY=1 
/usr/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..20
not ok 1 - finding player
#   Failed test 'finding player'
#   at test.pl line 14.
not ok 2 - finding test track
#   Failed test 'finding test track'
#   at test.pl line 22.
not ok 3 - read permissions
#   Failed test 'read permissions'
#   at test.pl line 23.
ok 4 - use PoCo::Player::Mpg123
ok 5 - session created
ok 6 - component instantiated
ok 6 - component instantiated
not ok 7 - play issued
not ok 7 - play issued
#   Failed test 'play issued'
#   Failed test 'play issued'
#   at test.pl line 46.
#   at test.pl line 46.
ok 8 - died tested
ok 9 - wait for end
ok 9 - wait for end
ok 10 - died tested
ok 11 - wait for end
ok 11 - wait for end
not ok 12 - error handler [32]: "Broken pipe"
#   Failed test 'error handler [32]: "Broken pipe"'
#   at test.pl line 153.
# Looks like you planned 20 tests but only ran 12.
# Looks like you failed 5 tests of 12 run.
*** Error code 5

Stop in /usr/home/chris/.cpanplus/5.8.7/build/POE-Component-Player-Mpg123-1.2.


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
        POE::Component::Child             1.39 

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = 
/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/home/chris/bin
    PERL5LIB = 
:/home/chris/.cpanplus/5.8.7/build/POE-Component-Child-1.39/blib/lib:/home/chris/.cpanplus/5.8.7/build/POE-Component-Child-1.39/blib/arch:/home/chris/.cpanplus/5.8.7/build/POE-Component-Child-1.39/blib:/home/chris/.cpanplus/5.8.7/build/POE-Component-Child-1.39/blib/lib:/home/chris/.cpanplus/5.8.7/build/POE-Component-Child-1.39/blib/arch:/home/chris/.cpanplus/5.8.7/build/POE-Component-Child-1.39/blib:/home/chris/.cpanplus/5.8.7/build/POE-Component-Player-Mpg123-1.2/blib/lib:/home/chris/.cpanplus/5.8.7/build/POE-Component-Player-Mpg123-1.2/blib/arch:/home/chris/.cpanplus/5.8.7/build/POE-Component-Player-Mpg123-1.2/blib
    PERL5_CPANPLUS_IS_RUNNING = 52099
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/sh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = perl
    UID:  $<  = 1001
    EUID: $>  = 1001
    GID:  $(  = 0 0 0
    EGID: $)  = 0 0 0


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 7) configuration:
  Platform:
    osname=freebsd, osvers=6.0-release, archname=alpha-freebsd
    uname='freebsd alpha.bingosnet.co.uk 6.0-release freebsd 6.0-release #0: 
thu nov 3 01:10:43 utc 2005 [EMAIL PROTECTED]:usrobjusrsrcsysgeneric alpha '
    config_args='-sde -Dprefix=/usr/local 
-Darchlib=/usr/local/lib/perl5/5.8.7/mach -Dprivlib=/usr/local/lib/perl5/5.8.7 
-Dman3dir=/usr/local/lib/perl5/5.8.7/perl/man/man3 
-Dman1dir=/usr/local/man/man1 
-Dsitearch=/usr/local/lib/perl5/site_perl/5.8.7/mach 
-Dsitelib=/usr/local/lib/perl5/site_perl/5.8.7 -Dscriptdir=/usr/local/bin 
-Dsiteman3dir=/usr/local/lib/perl5/5.8.7/man/man3 
-Dsiteman1dir=/usr/local/man/man1 -Ui_malloc -Ui_iconv -Uinstallusrbinperl 
-Dcc=cc -Duseshrplib 
-Dccflags=-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.7/BSDPAN" -Doptimize=-O2 
-fno-strict-aliasing -pipe -mcpu=ev4 -mtune=ev5 -mieee -Ud_dosuid -Ui_gdbm 
-Dusethreads=n -Dusemymalloc=y -Duse64bitint'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef use5005threads=undef useithreads=undef 
usemultiplicity=undef
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=undef
    usemymalloc=y, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.7/BSDPAN" 
-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe',
    optimize='-O2 -fno-strict-aliasing -pipe -mcpu=ev4 -mtune=ev5 -mieee',
    cppflags='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.7/BSDPAN" -DHAS_FPSETMASK 
-DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe'
    ccversion='', gccversion='3.4.4 [FreeBSD] 20050518', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E'
    libpth=/usr/lib
    libs=-lm -lcrypt -lutil
    perllibs=-lm -lcrypt -lutil
    libc=, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='  
-Wl,-R/usr/local/lib/perl5/5.8.7/mach/CORE'
    cccdlflags='-DPIC -fPIC', lddlflags='-shared '

Reply via email to