This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear HESCO,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.076. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Wed Jan 10 09:44:49 2007] Trying to get
'http://www.cpan.org/authors/id/H/HE/HESCO/GD-Graph-Thermometer-0.02.tar.gz'
[MSG] [Wed Jan 10 09:44:49 2007] Trying to get
'http://www.cpan.org/authors/id/H/HE/HESCO/CHECKSUMS'
[MSG] [Wed Jan 10 09:44:49 2007] Checksum matches for
'GD-Graph-Thermometer-0.02.tar.gz'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted 'GD-Graph-Thermometer-0.02/'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted 'GD-Graph-Thermometer-0.02/META.yml'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted 'GD-Graph-Thermometer-0.02/Changes'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted 'GD-Graph-Thermometer-0.02/t/'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted
'GD-Graph-Thermometer-0.02/t/pod-coverage.t'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted 'GD-Graph-Thermometer-0.02/t/pod.t'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted
'GD-Graph-Thermometer-0.02/t/00.load.t'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted
'GD-Graph-Thermometer-0.02/t/perlcritic.t'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted 'GD-Graph-Thermometer-0.02/MANIFEST'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted 'GD-Graph-Thermometer-0.02/lib/'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted 'GD-Graph-Thermometer-0.02/lib/GD/'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted
'GD-Graph-Thermometer-0.02/lib/GD/Graph/'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted
'GD-Graph-Thermometer-0.02/lib/GD/Graph/Thermometer.pm'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted 'GD-Graph-Thermometer-0.02/samples/'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted
'GD-Graph-Thermometer-0.02/samples/render_thermometer.pl'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted 'GD-Graph-Thermometer-0.02/Build.PL'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted
'GD-Graph-Thermometer-0.02/Makefile.PL'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted 'GD-Graph-Thermometer-0.02/README'
[MSG] [Wed Jan 10 09:44:50 2007] Extracted 'GD::Graph::Thermometer' to
'/home/chris/perl588/.cpanplus/5.8.8/build/GD-Graph-Thermometer-0.02'
[MSG] [Wed Jan 10 09:44:50 2007] Checking if your kit is complete...
Looks good
Writing Makefile for GD::Graph::Thermometer
[MSG] [Wed Jan 10 09:44:50 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Wed Jan 10 09:44:52 2007] cp lib/GD/Graph/Thermometer.pm
blib/lib/GD/Graph/Thermometer.pm
[ERROR] [Wed Jan 10 09:44:52 2007] MAKE TEST failed:
/home/chris/perl588/bin/perl.exe "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00.load.........
# Failed test 'use GD::Graph::Thermometer;'
# at t/00.load.t line 7.
# Tried to use 'GD::Graph::Thermometer'.
# Error: Can't locate GD.pm in @INC (@INC contains: lib
/home/chris/perl588/.cpanplus/5.8.8/build/GD-Graph-Thermometer-0.02/blib/lib
/home/chris/perl588/.cpanplus/5.8.8/build/GD-Graph-Thermometer-0.02/blib/arch
/home/chris/perl588/.cpanplus/5.8.8/build/GD-Graph-Thermometer-0.02/blib
/home/chris/perl588/lib/5.8.8/cygwin-thread-multi-64int
/home/chris/perl588/lib/5.8.8
/home/chris/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int
/home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl .) at
lib/GD/Graph/Thermometer.pm line 7.
# BEGIN failed--compilation aborted at t/00.load.t line 7.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Use of uninitialized value in concatenation (.) or string at t/00.load.t line
10.
# Testing GD::Graph::Thermometer
# Looks like you failed 1 test of 1.
dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
t/perlcritic......Can't locate Test/Perl/Critic.pm in @INC (@INC contains:
/home/chris/perl588/.cpanplus/5.8.8/build/GD-Graph-Thermometer-0.02/blib/lib
/home/chris/perl588/.cpanplus/5.8.8/build/GD-Graph-Thermometer-0.02/blib/arch
/home/chris/perl588/.cpanplus/5.8.8/build/GD-Graph-Thermometer-0.02/blib
/home/chris/perl588/lib/5.8.8/cygwin-thread-multi-64int
/home/chris/perl588/lib/5.8.8/cygwin-thread-multi-64int
/home/chris/perl588/lib/5.8.8
/home/chris/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int
/home/chris/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int
/home/chris/perl588/lib/site_perl/5.8.8
/home/chris/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int
/home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl .
/home/chris/perl588/lib/5.8.8/cygwin-thread-multi-64int
/home/chris/perl588/lib/5.8.8
/home/chris/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int
/home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl .) at
t/perlcritic.t line 3.
dubious
Test returned status 2 (wstat 512, 0x200)
t/pod-coverage....ok
t/pod.............skipped
all skipped: Test::Pod 1.14 required for testing POD
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/00.load.t 1 256 1 1 1
t/perlcritic.t 2 512 ?? ?? ??
1 test skipped.
Failed 2/4 test scripts. 1/2 subtests failed.
Files=4, Tests=2, 0 wallclock secs ( 0.33 cusr + 0.15 csys = 0.48 CPU)
Failed 2/4 test programs. 1/2 subtests failed.
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
GD
Test::Perl::Critic
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'HESCO ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'GD' => '0', # or a minimum working version
'Test::Perl::Critic' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Test::More 0.66
version 0.68
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=cygwin, osvers=1.5.21(0.15642), archname=cygwin-thread-multi-64int
uname='cygwin_nt-5.2 lapster 1.5.21(0.15642) 2006-07-30 14:21 i686 cygwin '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe
-Wdeclaration-after-statement',
optimize='-O2',
cppflags='-DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe
-Wdeclaration-after-statement'
ccversion='', gccversion='3.4.4 (cygming special) (gdc 0.12, using dmd
0.125)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='ld2', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib /lib
libs=-lgdbm -ldl -lcrypt -lgdbm_compat
perllibs=-ldl -lcrypt -lgdbm_compat
libc=/usr/lib/libc.a, so=dll, useshrplib=true, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags=' -L/usr/local/lib'
