This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear DAMI, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Mar 11 20:14:12 2007] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAMI/Data-Domain-0.04.tar.gz' [MSG] [Sun Mar 11 20:14:14 2007] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAMI/CHECKSUMS' [MSG] [Sun Mar 11 20:14:15 2007] Checksum matches for 'Data-Domain-0.04.tar.gz' [MSG] [Sun Mar 11 20:14:17 2007] Extracted 'Data-Domain-0.04/' [MSG] [Sun Mar 11 20:14:17 2007] Extracted 'Data-Domain-0.04/Build.pl' [MSG] [Sun Mar 11 20:14:18 2007] Extracted 'Data-Domain-0.04/Changes' [MSG] [Sun Mar 11 20:14:18 2007] Extracted 'Data-Domain-0.04/lib/' [MSG] [Sun Mar 11 20:14:18 2007] Extracted 'Data-Domain-0.04/lib/Data/' [MSG] [Sun Mar 11 20:14:18 2007] Extracted 'Data-Domain-0.04/lib/Data/Domain.pm' [MSG] [Sun Mar 11 20:14:18 2007] Extracted 'Data-Domain-0.04/MANIFEST' [MSG] [Sun Mar 11 20:14:18 2007] Extracted 'Data-Domain-0.04/META.yml' [MSG] [Sun Mar 11 20:14:18 2007] Extracted 'Data-Domain-0.04/README' [MSG] [Sun Mar 11 20:14:19 2007] Extracted 'Data-Domain-0.04/t/' [MSG] [Sun Mar 11 20:14:19 2007] Extracted 'Data-Domain-0.04/t/data-domain.t' [MSG] [Sun Mar 11 20:14:19 2007] Extracted 'Data-Domain-0.04/t/pod-coverage.t' [MSG] [Sun Mar 11 20:14:20 2007] Extracted 'Data-Domain-0.04/t/pod.t' [MSG] [Sun Mar 11 20:14:20 2007] Extracted 'Data::Domain' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/Data-Domain-0.04' [ERROR] [Sun Mar 11 20:14:20 2007] Unable to find 'Build.PL' or 'Makefile.PL' for 'Data::Domain'; Will default to 'CPANPLUS::Dist::MM' but might be unable to install! [MSG] [Sun Mar 11 20:14:21 2007] No 'Makefile.PL' found - attempting to generate one [MSG] [Sun Mar 11 20:14:25 2007] Checking if your kit is complete... Looks good Writing Makefile for Data::Domain [MSG] [Sun Mar 11 20:14:25 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Mar 11 20:14:37 2007] cp lib/Data/Domain.pm blib/lib/Data/Domain.pm cp Build.pl blib/lib/Data/Build.pl Manifying blib/man3/Data::Domain.3 [ERROR] [Sun Mar 11 20:14:43 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/data-domain.....# Testing Data::Domain 0.04, Perl 5.008008, /export/home/chris/perl588/bin/perl Can't locate Date/Calc.pm in @INC (@INC contains: /export/home/chris/perl588/.cpanplus/5.8.8/build/Data-Domain-0.04/blib/lib /export/home/chris/perl588/.cpanplus/5.8.8/build/Data-Domain-0.04/blib/arch /export/home/chris/perl588/.cpanplus/5.8.8/build/Data-Domain-0.04/blib /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl . /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl .) at /export/home/chris/perl588/lib/5.8.8/autouse.pm line 53. # Looks like you planned 130 tests but only ran 41. # Looks like your test died just after 41. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 42-130 Failed 89/130 tests, 31.54% okay t/pod-coverage....skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.............skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/data-domain.t 255 65280 130 178 42-130 2 tests skipped. Failed 1/3 test scripts. 89/130 subtests failed. Files=3, Tests=130, 2 wallclock secs ( 0.36 cusr + 0.11 csys = 0.47 CPU) Failed 1/3 test programs. 89/130 subtests failed. *** Error code 29 make: Fatal error: Command failed for target `test_dynamic' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Date::Calc As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'DAMI ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Date::Calc' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = C PATH = /export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin: PERL5LIB = :/export/home/chris/perl588/.cpanplus/5.8.8/build/Data-Domain-0.04/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Data-Domain-0.04/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Data-Domain-0.04/blib PERL5_CPANPLUS_IS_RUNNING = 24109 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/bash TERM = sun-color Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /export/home/chris/perl588/bin/perl UID: $< = 100 EUID: $> = 100 GID: $( = 1 1 EGID: $) = 1 1 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV', optimize='-O', cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', gccosandvers='solaris2.10' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -R /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE' cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
