This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Roland Giersig, This is a computer-generated error report created automatically by CPANPLUS, version 0.81_01. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Aug 12 23:47:22 2007] Trying to get 'http://www.cpan.org/authors/id/X/XA/XANTUS/POE-Component-Telephony-CTPort-0.03.tar.gz' [MSG] [Sun Aug 12 23:47:23 2007] Trying to get 'http://www.cpan.org/authors/id/X/XA/XANTUS/CHECKSUMS' [MSG] [Sun Aug 12 23:47:24 2007] Checksum matches for 'POE-Component-Telephony-CTPort-0.03.tar.gz' [MSG] [Sun Aug 12 23:47:25 2007] Extracted 'POE-Component-Telephony-CTPort-0.03/' [MSG] [Sun Aug 12 23:47:25 2007] Extracted 'POE-Component-Telephony-CTPort-0.03/Changes' [MSG] [Sun Aug 12 23:47:25 2007] Extracted 'POE-Component-Telephony-CTPort-0.03/MANIFEST' [MSG] [Sun Aug 12 23:47:25 2007] Extracted 'POE-Component-Telephony-CTPort-0.03/Makefile.PL' [MSG] [Sun Aug 12 23:47:25 2007] Extracted 'POE-Component-Telephony-CTPort-0.03/CTPort.pm' [MSG] [Sun Aug 12 23:47:25 2007] Extracted 'POE-Component-Telephony-CTPort-0.03/t/' [MSG] [Sun Aug 12 23:47:25 2007] Extracted 'POE-Component-Telephony-CTPort-0.03/t/00_use.t' [MSG] [Sun Aug 12 23:47:25 2007] Extracted 'POE-Component-Telephony-CTPort-0.03/README' [MSG] [Sun Aug 12 23:47:25 2007] Extracted 'POE::Component::Telephony::CTPort' to '/home/chris/dev/blead/.cpanplus/5.9.5/build/POE-Component-Telephony-CTPort-0.03' [MSG] [Sun Aug 12 23:47:25 2007] Checking if your kit is complete... Looks good Warning: prerequisite IO::Pty not found. Warning: prerequisite POE 0.22 not found. Warning: prerequisite POE::Component::Client::TCP not found. Warning: prerequisite POE::Wheel::Run not found. Writing Makefile for POE::Component::Telephony::CTPort [MSG] [Sun Aug 12 23:47:25 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Aug 12 23:47:25 2007] Module 'POE::Component::Telephony::CTPort' requires 'IO::Pty' version '0.0' to be installed [MSG] [Sun Aug 12 23:47:25 2007] Module 'POE::Component::Telephony::CTPort' requires 'POE' version '0.22' to be installed [MSG] [Sun Aug 12 23:47:25 2007] Module 'POE::Component::Telephony::CTPort' requires 'POE::Component::Client::TCP' version '0.0' to be installed [MSG] [Sun Aug 12 23:47:25 2007] Module 'POE::Component::Telephony::CTPort' requires 'POE::Wheel::Run' version '0.0' to be installed [MSG] [Sun Aug 12 23:47:26 2007] Trying to get 'http://www.cpan.org/authors/id/R/RG/RGIERSIG/IO-Tty-1.07.tar.gz' [MSG] [Sun Aug 12 23:47:26 2007] Trying to get 'http://www.cpan.org/authors/id/R/RG/RGIERSIG/CHECKSUMS' [MSG] [Sun Aug 12 23:47:27 2007] Checksum matches for 'IO-Tty-1.07.tar.gz' [MSG] [Sun Aug 12 23:47:27 2007] Extracted 'IO-Tty-1.07/' [MSG] [Sun Aug 12 23:47:27 2007] Extracted 'IO-Tty-1.07/ChangeLog' [MSG] [Sun Aug 12 23:47:27 2007] Extracted 'IO-Tty-1.07/Makefile.PL' [MSG] [Sun Aug 12 23:47:27 2007] Extracted 'IO-Tty-1.07/MANIFEST' [MSG] [Sun Aug 12 23:47:27 2007] Extracted 'IO-Tty-1.07/META.yml' [MSG] [Sun Aug 12 23:47:27 2007] Extracted 'IO-Tty-1.07/Pty.pm' [MSG] [Sun Aug 12 23:47:27 2007] Extracted 'IO-Tty-1.07/README' [MSG] [Sun Aug 12 23:47:27 2007] Extracted 'IO-Tty-1.07/test.pl' [MSG] [Sun Aug 12 23:47:27 2007] Extracted 'IO-Tty-1.07/try' [MSG] [Sun Aug 12 23:47:27 2007] Extracted 'IO-Tty-1.07/Tty.pm' [MSG] [Sun Aug 12 23:47:27 2007] Extracted 'IO-Tty-1.07/Tty.xs' [MSG] [Sun Aug 12 23:47:27 2007] Extracted 'IO::Pty' to '/home/chris/dev/blead/.cpanplus/5.9.5/build/IO-Tty-1.07' [MSG] [Sun Aug 12 23:47:59 2007] Now let's see what we can find out about your system (logfiles of failing tests are available in the conf/ dir)... Looking for _getpty()...... not found. Looking for getpt()........ not found. Looking for grantpt()...... FOUND. Looking for openpty()...... FOUND. Looking for ptsname()...... FOUND. Looking for ptsname_r().... not found. Looking for sigaction().... FOUND. Looking for strlcpy()...... FOUND. Looking for ttyname()...... FOUND. Looking for unlockpt()..... FOUND. Looking for libutil.h...... not found. Looking for pty.h.......... not found. Looking for sys/pty.h...... not found. Looking for sys/ptyio.h.... not found. Looking for sys/stropts.h.. not found. Looking for termio.h....... not found. Looking for termios.h...... FOUND. Looking for util.h......... FOUND. Checking which symbols compile OK... (sorry for the tedious check, but some systems have not too clean header files, to say the least; '+' means OK, '-' means not defined and '*' has compile problems...) +B0 +B110 +B115200 +B1200 +B134 +B150 -B153600 +B1800 +B19200 +B200 +B230400 +B2400 +B300 -B307200 +B38400 +B460800 +B4800 +B50 +B57600 +B600 +B75 +B76800 +B9600 +BRKINT -BS0 -BS1 -BSDLY -CBAUD -CBAUDEXT +CBRK +CCTS_OFLOW -CDEL +CDSUSP +CEOF +CEOL -CEOL2 +CEOT +CERASE -CESC +CFLUSH -CIBAUD -CIBAUDEXT +CINTR +CKILL +CLNEXT +CLOCAL -CNSWTCH -CNUL +CQUIT -CR0 -CR1 -CR2 -CR3 -CRDLY +CREAD +CRPRNT +CRTSCTS -CRTSXOFF +CRTS_IFLOW +CS5 +CS6 +CS7 +CS8 +CSIZE +CSTART +CSTOP +CSTOPB +CSUSP -CSWTCH +CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE +ECHO +ECHOCTL +ECHOE +ECHOK +ECHOKE +ECHONL +ECHOPRT +EXTA +EXTB -FF0 -FF1 -FFDLY -FIORDCHK +FLUSHO +HUPCL +ICANON +ICRNL +IEXTEN +IGNBRK +IGNCR +IGNPAR +IMAXBEL +INLCR +INPCK +ISIG +ISTRIP -IUCLC +IXANY +IXOFF +IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK +NCCS -NL0 -NL1 -NLDLY +NOFLSH +OCRNL -OFDEL -OFILL -OLCUC +ONLCR +ONLRET +ONOCR +OPOST -PAGEOUT +PARENB -PAREXT +PARMRK +PARODD +PENDIN -RCV1EN -RTS_TOG -TAB0 -TAB1 -TAB2 -TAB3 -TABDLY -TCDSET -TCFLSH -TCGETA -TCGETS +TCIFLUSH +TCIOFF +TCIOFLUSH +TCION +TCOFLUSH +TCOOFF +TCOON +TCSADRAIN +TCSAFLUSH +TCSANOW -TCSBRK -TCSETA -TCSETAF -TCSETAW -TCSETCTTY -TCSETS -TCSETSF -TCSETSW -TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 +TIOCCBRK +TIOCCDTR +TIOCCONS +TIOCEXCL +TIOCFLUSH -TIOCGETC +TIOCGETD -TIOCGETP -TIOCGLTC +TIOCGPGRP +TIOCGSID -TIOCGSOFTCAR +TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET +TIOCMBIC +TIOCMBIS +TIOCMGET +TIOCMSET +TIOCM_CAR +TIOCM_CD +TIOCM_CTS +TIOCM_DSR +TIOCM_DTR +TIOCM_LE +TIOCM_RI +TIOCM_RNG +TIOCM_RTS +TIOCM_SR +TIOCM_ST +TIOCNOTTY +TIOCNXCL +TIOCOUTQ +TIOCREMOTE +TIOCSBRK +TIOCSCTTY +TIOCSDTR -TIOCSETC +TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC +TIOCSPGRP -TIOCSSID -TIOCSSOFTCAR +TIOCSTART +TIOCSTI +TIOCSTOP +TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL +TOSTOP -VCEOF -VCEOL +VDISCARD +VDSUSP +VEOF +VEOL +VEOL2 +VERASE +VINTR +VKILL +VLNEXT +VMIN +VQUIT +VREPRINT +VSTART +VSTOP +VSUSP -VSWTCH -VT0 -VT1 -VTDLY +VTIME +VWERASE -WRAP -XCASE -XCLUDE -XMT1EN -XTABS >>> Configuration looks good! <<< Writing IO::Tty::Constant.pm... DEFINE = -DHAVE_DEV_PTMX -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_PTSNAME -DHAVE_SIGACTION -DHAVE_STRLCPY -DHAVE_TERMIOS_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT -DHAVE_UTIL_H Checking if your kit is complete... Looks good Writing Makefile for IO::Tty [MSG] [Sun Aug 12 23:47:59 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Aug 12 23:48:10 2007] cp Tty.pm blib/lib/IO/Tty.pm cp Tty/Constant.pm blib/lib/IO/Tty/Constant.pm cp Pty.pm blib/lib/IO/Pty.pm /home/chris/dev/blead/bin/perl5.9.5 /home/chris/dev/blead/lib/perl5/5.9.5/ExtUtils/xsubpp -typemap /home/chris/dev/blead/lib/perl5/5.9.5/ExtUtils/typemap Tty.xs > Tty.xsc && mv Tty.xsc Tty.c cc -c -fno-strict-aliasing -pipe -I/usr/pkg/include -O -DVERSION=\"1.07\" -DXS_VERSION=\"1.07\" -DPIC -fPIC "-I/home/chris/dev/blead/lib/perl5/5.9.5/i386-netbsd-thread-multi-64int/CORE" -DHAVE_DEV_PTMX -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_PTSNAME -DHAVE_SIGACTION -DHAVE_STRLCPY -DHAVE_TERMIOS_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT -DHAVE_UTIL_H Tty.c Running Mkbootstrap for IO::Tty () chmod 644 Tty.bs rm -f blib/arch/auto/IO/Tty/Tty.so cc --whole-archive -shared -L/usr/pkg/lib Tty.o -o blib/arch/auto/IO/Tty/Tty.so \ -lutil \ chmod 755 blib/arch/auto/IO/Tty/Tty.so cp Tty.bs blib/arch/auto/IO/Tty/Tty.bs chmod 644 blib/arch/auto/IO/Tty/Tty.bs Manifying blib/man3/IO::Tty::Constant.3 Manifying blib/man3/IO::Tty.3 Manifying blib/man3/IO::Pty.3 [ERROR] [Sun Aug 12 23:48:10 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/chris/dev/blead/bin/perl5.9.5 "-Iblib/lib" "-Iblib/arch" test.pl 1..4 Configuration: -DHAVE_DEV_PTMX -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_PTSNAME -DHAVE_SIGACTION -DHAVE_STRLCPY -DHAVE_TERMIOS_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT -DHAVE_UTIL_H Checking for appropriate ioctls: TIOCNOTTY TIOCSCTTY Checking that returned fd's don't clash with stdin/out/err... trying openpty()... trying grantpt()... trying unlockpt()... trying ptsname()... Cannot create a new IO::Tty from fd 5: Bad file descriptor at test.pl line 42 trying openpty()... trying grantpt()... trying unlockpt()... trying ptsname()... Cannot create a new IO::Tty from fd 7: Bad file descriptor at test.pl line 58 child exit=2304 not ok 1 # Test failed at test.pl line 52. Checking if child gets pty as controlling terminal... gmake: [MSG] [Sun Aug 12 23:48:10 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/bin:/bin:/usr/pkg/bin:/usr/local/bin:/usr/X11R6/bin PERL5LIB = :/home/chris/dev/blead/.cpanplus/5.9.5/build/IO-Tty-1.07/blib/lib:/home/chris/dev/blead/.cpanplus/5.9.5/build/IO-Tty-1.07/blib/arch:/home/chris/dev/blead/.cpanplus/5.9.5/build/IO-Tty-1.07/blib PERL5_CPANPLUS_IS_RUNNING = 8415 PERL5_CPANPLUS_IS_VERSION = 0.81_01 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/pkg/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/dev/blead/bin/perl5.9.5 UID: $< = 1001 EUID: $> = 1001 GID: $( = 100 100 0 EGID: $) = 100 100 0 ------------------------------- -- Summary of my perl5 (revision 5 version 9 subversion 5 patch 31701) configuration: Platform: osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 [EMAIL PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 ' config_args='' hint=previous, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include -fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
