This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear GBARR, This is a computer-generated error report created automatically by CPANPLUS, version 0.80. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Sep 2 20:30:26 2007] Trying to get 'http://www.cpan.org/authors/id/G/GB/GBARR/libnet-1.22.tar.gz' [MSG] [Sun Sep 2 20:30:28 2007] Trying to get 'http://www.cpan.org/authors/id/G/GB/GBARR/CHECKSUMS' [MSG] [Sun Sep 2 20:30:28 2007] Checksum matches for 'libnet-1.22.tar.gz' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/POP3.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/Netrc.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/FTP/' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/FTP/L.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/FTP/I.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/FTP/dataconn.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/FTP/A.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/FTP/E.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/Config.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/Cmd.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/FTP.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/SMTP.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/libnetFAQ.pod' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/Domain.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/NNTP.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Net/Time.pm' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/t/' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/t/hostname.t' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/t/libnet_t.pl' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/t/netrc.t' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/t/ftp.t' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/t/nntp.t' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/t/config.t' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/t/smtp.t' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/t/require.t' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/t/datasend.t' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Changes' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/demos/' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/demos/inetd' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/demos/smtp.self' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/demos/time' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/demos/ftp' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/demos/pop3' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/demos/nntp.mirror' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/demos/nntp' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/MANIFEST' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Hostname.pm.eg' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Configure' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/install-nomake' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Config.eg' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/Makefile.PL' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/README' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/META.yml' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet-1.22/SIGNATURE' [MSG] [Sun Sep 2 20:30:29 2007] Extracted 'libnet' to '/home/cpan/.cpanplus/5.8.8/build/libnet-1.22' [MSG] [Sun Sep 2 20:30:31 2007] Checking for Socket...ok Checking for IO::Socket...ok Checking if your kit is complete... Looks good Ah, I see you already have installed libnet before. Do you want to modify/update your configuration (y|n) ? [no] no This script will prompt you to enter hostnames that can be used as defaults for some of the modules in the libnet distribution. To ensure that you do not enter an invalid hostname, I can perform a lookup on each hostname you enter. If your internet connection is via a dialup line then you may not want me to perform these lookups, as it will require you to be on-line. Do you want me to perform hostname lookups (y|n) ? [yes] The following questions all require a list of host names, separated with spaces. If you do not have a host available for any of the services, then enter a single space, followed by <CR>. To accept the default, hit <CR> Enter a list of available NNTP hosts : [] Enter a list of available SMTP hosts : [] Enter a list of available POP3 hosts : [] Enter a list of available SNPP hosts : [] Enter a list of available PH Hosts : [] Enter a list of available TIME Hosts : [] Enter a list of available DAYTIME Hosts : [] Do you have a firewall/ftp proxy between your machine and the internet If you use a SOCKS firewall answer no (y|n) ? [no] Normally when FTP needs a data connection the client tells the server a port to connect to, and the server initiates a connection to the client. Some setups, in particular firewall setups, can/do not work using this protocol. In these situations the client must make the connection to the server, this is called a passive transfer. Should all FTP connections be passive (y|n) ? [no] What is your local internet domain name : [] If you specified some default hosts above, it is possible for me to do some basic tests when you run `make test' This will cause `make test' to be quite a bit slower and, if your internet connection is via dialup, will require you to be on-line unless the hosts are local. Do you want me to run these tests (y|n) ? [yes] To allow Net::FTP to be tested I will need a hostname. This host should allow anonymous access and have a /pub directory What host can I use : [] Writing libnet.cfg Writing Makefile for Net [MSG] [Sun Sep 2 20:30:31 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Sep 2 20:30:34 2007] cp Net/POP3.pm blib/lib/Net/POP3.pm cp Net/FTP/dataconn.pm blib/lib/Net/FTP/dataconn.pm cp Net/SMTP.pm blib/lib/Net/SMTP.pm cp Net/Config.pm blib/lib/Net/Config.pm cp Net/libnetFAQ.pod blib/lib/Net/libnetFAQ.pod cp Net/FTP/E.pm blib/lib/Net/FTP/E.pm cp Net/Domain.pm blib/lib/Net/Domain.pm cp Net/Cmd.pm blib/lib/Net/Cmd.pm cp Net/FTP.pm blib/lib/Net/FTP.pm cp libnet.cfg blib/lib/Net/libnet.cfg cp Net/FTP/A.pm blib/lib/Net/FTP/A.pm cp Net/FTP/L.pm blib/lib/Net/FTP/L.pm cp Net/Netrc.pm blib/lib/Net/Netrc.pm cp Net/NNTP.pm blib/lib/Net/NNTP.pm cp Net/Time.pm blib/lib/Net/Time.pm cp Net/FTP/I.pm blib/lib/Net/FTP/I.pm Manifying blib/man3/Net::POP3.3 Manifying blib/man3/Net::SMTP.3 Manifying blib/man3/Net::Config.3 Manifying blib/man3/Net::libnetFAQ.3 Manifying blib/man3/Net::Domain.3 Manifying blib/man3/Net::Cmd.3 Manifying blib/man3/Net::FTP.3 Manifying blib/man3/Net::Netrc.3 Manifying blib/man3/Net::NNTP.3 Manifying blib/man3/Net::Time.3 [ERROR] [Sun Sep 2 20:30:37 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/config......ok t/datasend....ok t/ftp.........skipped all skipped: no reason given t/hostname....FAILED test 1 Failed 1/5 tests, 80.00% okay (less 2 skipped tests: 2 okay, 40.00%) t/netrc.......ok t/nntp........skipped all skipped: no reason given t/require.....ok t/smtp........skipped all skipped: no reason given Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/hostname.t 5 1 1 3 tests and 2 subtests skipped. Failed 1/8 test scripts. 1/95 subtests failed. Files=8, Tests=95, 3 wallclock secs ( 0.53 cusr + 1.38 csys = 1.91 CPU) Failed 1/8 test programs. 1/95 subtests failed. *** Error code 35 Stop in /usr/home/cpan/.cpanplus/5.8.8/build/libnet-1.22. [MSG] [Sun Sep 2 20:30:37 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want IO::Socket 1.30 1.05 Socket 1.78 1.3 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/home/cpan/bin PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/libnet-1.22/blib/lib:/home/cpan/.cpanplus/5.8.8/build/libnet-1.22/blib/arch:/home/cpan/.cpanplus/5.8.8/build/libnet-1.22/blib PERL5_CPANPLUS_IS_RUNNING = 28774 PERL5_CPANPLUS_IS_VERSION = 0.80 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/sh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /usr/home/cpan/perl588/bin/perl UID: $< = 1002 EUID: $> = 1002 GID: $( = 20 2 20 20 EGID: $) = 20 2 20 20 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=freebsd, osvers=6.2-release, archname=i386-freebsd-thread-multi-64int uname='freebsd forneus.bingosnet.co.uk 6.2-release freebsd 6.2-release #0: fri jan 12 10:40:27 utc 2007 [EMAIL PROTECTED]:usrobjusrsrcsysgeneric i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include', optimize='-O', cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.6 [FreeBSD] 20060305', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib' libpth=/usr/lib /usr/local/lib libs=-lm -lcrypt -lutil -lc_r perllibs=-lm -lcrypt -lutil -lc_r libc=, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
