This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Iain Wade,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Sep 11 10:53:55 2007] Trying to get
'http://www.cpan.org/authors/id/I/IW/IWADE/CHECKSUMS'
[MSG] [Tue Sep 11 10:53:55 2007] Checksum matches for 'Apache2-S3-0.02.tar.gz'
[MSG] [Tue Sep 11 10:53:56 2007] Extracted 'Apache2-S3-0.02/'
[MSG] [Tue Sep 11 10:53:56 2007] Extracted 'Apache2-S3-0.02/META.yml'
[MSG] [Tue Sep 11 10:53:56 2007] Extracted 'Apache2-S3-0.02/README'
[MSG] [Tue Sep 11 10:53:56 2007] Extracted 'Apache2-S3-0.02/lib/'
[MSG] [Tue Sep 11 10:53:56 2007] Extracted 'Apache2-S3-0.02/lib/Apache2/'
[MSG] [Tue Sep 11 10:53:56 2007] Extracted 'Apache2-S3-0.02/lib/Apache2/S3.pm'
[MSG] [Tue Sep 11 10:53:56 2007] Extracted 'Apache2-S3-0.02/MANIFEST'
[MSG] [Tue Sep 11 10:53:56 2007] Extracted 'Apache2-S3-0.02/Makefile.PL'
[MSG] [Tue Sep 11 10:53:56 2007] Extracted 'Apache2-S3-0.02/Changes'
[MSG] [Tue Sep 11 10:53:56 2007] Extracted 'Apache2-S3-0.02/t/'
[MSG] [Tue Sep 11 10:53:56 2007] Extracted 'Apache2-S3-0.02/t/Apache2-S3.t'
[MSG] [Tue Sep 11 10:53:56 2007] Extracted 'Apache2::S3' to
'/home/cpan/perl581/.cpanplus/5.8.1/build/Apache2-S3-0.02'
[MSG] [Tue Sep 11 10:53:58 2007] Checking if your kit is complete...
Looks good
Warning: prerequisite Digest::HMAC 0 not found.
Warning: prerequisite Digest::SHA1 0 not found.
Writing Makefile for Apache2::S3
[MSG] [Tue Sep 11 10:53:58 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Tue Sep 11 10:53:58 2007] Module 'Apache2::S3' requires 'Digest::HMAC'
version '0' to be installed
[MSG] [Tue Sep 11 10:53:58 2007] Module 'Apache2::S3' requires 'Digest::SHA1'
version '0' to be installed
[MSG] [Tue Sep 11 10:53:58 2007] Trying to get
'http://www.cpan.org/authors/id/G/GA/GAAS/CHECKSUMS'
[MSG] [Tue Sep 11 10:53:59 2007] Checksum matches for 'Digest-HMAC-1.01.tar.gz'
[MSG] [Tue Sep 11 10:54:00 2007] Extracted 'Digest-HMAC-1.01/'
[MSG] [Tue Sep 11 10:54:00 2007] Extracted 'Digest-HMAC-1.01/rfc2104.txt'
[MSG] [Tue Sep 11 10:54:00 2007] Extracted 'Digest-HMAC-1.01/Makefile.PL'
[MSG] [Tue Sep 11 10:54:00 2007] Extracted 'Digest-HMAC-1.01/lib/'
[MSG] [Tue Sep 11 10:54:00 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/'
[MSG] [Tue Sep 11 10:54:00 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/HMAC.pm'
[MSG] [Tue Sep 11 10:54:00 2007] Extracted
'Digest-HMAC-1.01/lib/Digest/HMAC_SHA1.pm'
[MSG] [Tue Sep 11 10:54:00 2007] Extracted
'Digest-HMAC-1.01/lib/Digest/HMAC_MD5.pm'
[MSG] [Tue Sep 11 10:54:00 2007] Extracted 'Digest-HMAC-1.01/Changes'
[MSG] [Tue Sep 11 10:54:00 2007] Extracted 'Digest-HMAC-1.01/t/'
[MSG] [Tue Sep 11 10:54:01 2007] Extracted 'Digest-HMAC-1.01/t/rfc2202.t'
[MSG] [Tue Sep 11 10:54:01 2007] Extracted 'Digest-HMAC-1.01/README'
[MSG] [Tue Sep 11 10:54:01 2007] Extracted 'Digest-HMAC-1.01/MANIFEST'
[MSG] [Tue Sep 11 10:54:01 2007] Extracted 'Digest::HMAC' to
'/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-HMAC-1.01'
[MSG] [Tue Sep 11 10:54:02 2007] Warning: prerequisite Digest::SHA1 1 not found.
Writing Makefile for Digest::HMAC
[MSG] [Tue Sep 11 10:54:02 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Tue Sep 11 10:54:02 2007] Module 'Digest::HMAC' requires 'Digest::SHA1'
version '1' to be installed
[MSG] [Tue Sep 11 10:54:02 2007] Trying to get
'http://www.cpan.org/authors/id/G/GA/GAAS/CHECKSUMS'
[MSG] [Tue Sep 11 10:54:04 2007] Checksum matches for 'Digest-SHA1-2.11.tar.gz'
[MSG] [Tue Sep 11 10:54:04 2007] Extracted 'Digest-SHA1-2.11/'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/README'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/t/'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/t/bits.t'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/t/badfile.t'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/t/sha1.t'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/MANIFEST'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/fip180-1.html'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/SHA1.pm'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/typemap'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/fip180-1.gif'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/Changes'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/Makefile.PL'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest-SHA1-2.11/SHA1.xs'
[MSG] [Tue Sep 11 10:54:05 2007] Extracted 'Digest::SHA1' to
'/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-SHA1-2.11'
[MSG] [Tue Sep 11 10:54:07 2007] Writing Makefile for Digest::SHA1
[MSG] [Tue Sep 11 10:54:07 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Tue Sep 11 10:54:19 2007] cc -c -fno-strict-aliasing
-I/usr/pkg/include -O -DVERSION=\"2.11\" -DXS_VERSION=\"2.11\" -DPIC -fPIC
"-I/home/cpan/perl581/lib/5.8.1/i386-netbsd-thread-multi-64int/CORE" SHA1.c
Running Mkbootstrap for Digest::SHA1 ()
chmod 644 SHA1.bs
rm -f blib/arch/auto/Digest/SHA1/SHA1.so
cc --whole-archive -shared -L/usr/pkg/lib SHA1.o -o
blib/arch/auto/Digest/SHA1/SHA1.so \
\
chmod 755 blib/arch/auto/Digest/SHA1/SHA1.so
cp SHA1.bs blib/arch/auto/Digest/SHA1/SHA1.bs
chmod 644 blib/arch/auto/Digest/SHA1/SHA1.bs
Manifying blib/man3/Digest::SHA1.3
[MSG] [Tue Sep 11 10:54:21 2007] MAKE TEST passed: PERL_DL_NONLAZY=1
/home/cpan/perl581/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
t/badfile....ok
t/bits.......ok
t/sha1.......ok
All tests successful.
Files=3, Tests=17, 0 wallclock secs ( 0.22 cusr + 0.04 csys = 0.26 CPU)
[MSG] [Tue Sep 11 10:54:21 2007] Ok, not sending test report
[MSG] [Tue Sep 11 10:54:22 2007] Manifying blib/man3/Digest::HMAC_MD5.3
Manifying blib/man3/Digest::HMAC.3
Manifying blib/man3/Digest::HMAC_SHA1.3
[MSG] [Tue Sep 11 10:54:24 2007] MAKE TEST passed: PERL_DL_NONLAZY=1
/home/cpan/perl581/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
t/rfc2202....ok
All tests successful.
Files=1, Tests=14, 1 wallclock secs ( 0.11 cusr + 0.03 csys = 0.14 CPU)
[MSG] [Tue Sep 11 10:54:24 2007] Ok, not sending test report
[MSG] [Tue Sep 11 10:54:28 2007] cp lib/Apache2/S3.pm blib/lib/Apache2/S3.pm
Manifying blib/man3/Apache2::S3.3
[ERROR] [Tue Sep 11 10:54:29 2007] MAKE TEST failed: PERL_DL_NONLAZY=1
/home/cpan/perl581/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
t/Apache2-S3....Can't locate Apache2/Const.pm in @INC (@INC contains:
/home/cpan/perl581/.cpanplus/5.8.1/build/Apache2-S3-0.02/blib/lib
/home/cpan/perl581/.cpanplus/5.8.1/build/Apache2-S3-0.02/blib/arch
/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-SHA1-2.11/blib/lib
/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-SHA1-2.11/blib/arch
/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-SHA1-2.11/blib
/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-HMAC-1.01/blib/lib
/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-HMAC-1.01/blib/arch
/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-HMAC-1.01/blib
/home/cpan/perl581/.cpanplus/5.8.1/build/Apache2-S3-0.02/blib
/home/cpan/perl581/lib/5.8.1/i386-netbsd-thread-multi-64int
/home/cpan/perl581/lib/5.8.1/i386-netbsd-thread-multi-64int
/home/cpan/perl581/lib/5.8.1
/home/cpan/perl581/lib/site_perl/5.8.1/i386-netbsd-thread-multi-64int
/home/cpan/perl581/lib/site_perl/5.8.1/i386-netbsd-thread-multi-64int
/home/cpan/perl581/lib/site_perl/5.8.1
/home/cpan/perl581/lib/site_perl/5.8.1/i386-netbsd-thread-multi-64int
/home/cpan/perl581/lib/site_perl/5.8.1 /home/cpan/perl581/lib/site_perl .
/home/cpan/perl581/lib/5.8.1/i386-netbsd-thread-multi-64int
/home/cpan/perl581/lib/5.8.1
/home/cpan/perl581/lib/site_perl/5.8.1/i386-netbsd-thread-multi-64int
/home/cpan/perl581/lib/site_perl/5.8.1 /home/cpan/perl581/lib/site_perl .) at
/home/cpan/perl581/.cpanplus/5.8.1/build/Apache2-S3-0.02/blib/lib/Apache2/S3.pm
line 6.
BEGIN failed--compilation aborted at
/home/cpan/perl581/.cpanplus/5.8.1/build/Apache2-S3-0.02/blib/lib/Apache2/S3.pm
line 6.
Compilation failed in require at t/Apache2-S3.t line 10.
BEGIN failed--compilation aborted at t/Apache2-S3.t line 10.
dubious
Test returned status 2 (wstat 512, 0x200)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/Apache2-S3.t 2 512 1 2 1
Failed 1/1 test scripts. 1/1 subtests failed.
Files=1, Tests=1, 1 wallclock secs ( 0.08 cusr + 0.05 csys = 0.13 CPU)
Failed 1/1 test programs. 1/1 subtests failed.
gmake: *** [test_dynamic] Error 2
[MSG] [Tue Sep 11 10:54:29 2007] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Apache2::Const
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'Iain Wade ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'Apache2::Const' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Digest::HMAC 1.01 0
Digest::SHA1 2.11 0
MIME::Base64 3.07 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH =
/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB =
:/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-SHA1-2.11/blib/lib:/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-SHA1-2.11/blib/arch:/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-SHA1-2.11/blib:/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-SHA1-2.11/blib/lib:/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-SHA1-2.11/blib/arch:/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-SHA1-2.11/blib:/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-HMAC-1.01/blib/lib:/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-HMAC-1.01/blib/arch:/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-HMAC-1.01/blib:/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-HMAC-1.01/blib/lib:/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-HMAC-1.01/blib/arch:/home/cpan/perl581/.cpanplus/5.8.1/build/Digest-HMAC-1.01/blib:/home/cpan/perl581/.cpanplus/5.8.1/build/Apache2-S3-0.02/blib/lib:/home/cpan/perl581/.cpanplus/5.8.1/build/Apache2-S3-0.02/blib/arch:/home/cpan/perl581/.cpanplus/5.8.1/build/Apache2-S3-0.02/blib
PERL5_CPANPLUS_IS_RUNNING = 5964
PERL5_CPANPLUS_IS_VERSION = 0.80
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl581/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5.0 version 8 subversion 1) configuration:
Platform:
osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0:
tue oct 31 04:32:05 utc 2006 [EMAIL
PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop
i386 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -I/usr/pkg/include'
ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib
-L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared
-L/usr/pkg/lib'
