This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear EWILHELM, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Oct 28 16:57:45 2007] Trying to get 'http://www.cpan.org/authors/id/E/EW/EWILHELM/Device-SerialPins-v0.0.2.tar.gz' [MSG] [Sun Oct 28 16:57:46 2007] Trying to get 'http://www.cpan.org/authors/id/E/EW/EWILHELM/CHECKSUMS' [MSG] [Sun Oct 28 16:57:47 2007] Checksum matches for 'Device-SerialPins-v0.0.2.tar.gz' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/META.yml' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/examples/' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/examples/switch_switcher.pl' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/examples/blinker.pl' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/examples/forks_ok.pl' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/Changes' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/t/' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/t/00-load.t' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/MANIFEST' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/MANIFEST.SKIP' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/lib/' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/lib/Device/' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/lib/Device/SerialPins.pm' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/README' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device-SerialPins-v0.0.2/Build.PL' [MSG] [Sun Oct 28 16:57:47 2007] Extracted 'Device::SerialPins' to '/export/home/chris/.cpanplus/5.8.7/build/Device-SerialPins-v0.0.2' [ERROR] [Sun Oct 28 16:57:47 2007] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install! [MSG] [Sun Oct 28 16:57:48 2007] No 'Makefile.PL' found - attempting to generate one [MSG] [Sun Oct 28 16:57:49 2007] Checking if your kit is complete... Looks good Writing Makefile for Device::SerialPins [MSG] [Sun Oct 28 16:57:49 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Oct 28 16:57:52 2007] cp lib/Device/SerialPins.pm blib/lib/Device/SerialPins.pm Manifying blib/man3/Device::SerialPins.3pm [ERROR] [Sun Oct 28 16:57:54 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load.... # Failed test 'use Device::SerialPins;' # at t/00-load.t line 3. # Tried to use 'Device::SerialPins'. # Error: Can't locate object method "TIOCM_RTS" via package "Device::SerialPins::Bits" at /export/home/chris/.cpanplus/5.8.7/build/Device-SerialPins-v0.0.2/blib/lib/Device/SerialPins.pm line 91. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at t/00-load.t line 3. FAILED--Further testing stopped: cannot load Device::SerialPins make: *** [test_dynamic] Error 29 [MSG] [Sun Oct 28 16:57:54 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/usr/bin/X11:/usr/games PERL5LIB = :/export/home/chris/.cpanplus/5.8.7/build/Device-SerialPins-v0.0.2/blib/lib:/export/home/chris/.cpanplus/5.8.7/build/Device-SerialPins-v0.0.2/blib/arch:/export/home/chris/.cpanplus/5.8.7/build/Device-SerialPins-v0.0.2/blib PERL5_CPANPLUS_IS_RUNNING = 28794 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /usr/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 10 10 EGID: $) = 10 10 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 7) configuration: Platform: osname=solaris, osvers=2.11, archname=i386-pc-solaris2.11-thread-multi uname='sunos kernelunix.org 5.11 elatte:os_20050909:2005-09-15 i86pc i386 i86pc solaris ' config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcc=gcc -Dldflags=-lm -Dlddlflags=-shared -Dccdlflags=-Wl,-E -Dcccdlflags=-fPIC -Darchname=i386-pc-solaris2.11 -Dprefix=/usr -Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.8.7 -Dsitearch=/usr/local/lib/perl/5.8.7 -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Uusesfio -Uusenm -Duseshrplib -Dlibperl=libperl.so.5.8.7 -Dd_dosuid -des' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O', cppflags='-D_REENTRANT -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.0.3 20060113 (prerelease) (GNU_Solaris 4.0.2-6nexenta3)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags ='-lm -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lm -lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lrt -lnsl -lsocket perllibs=-lm -ldl -lm -lpthread -lc -lrt -lnsl -lsocket libc=, so=so, useshrplib=true, libperl=libperl.so.5.8.7 gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -R /usr/lib/perl/5.8/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
