This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear OLIMAUL, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Nov 5 01:55:11 2007] Trying to get 'http://www.cpan.org/authors/id/O/OL/OLIMAUL/Digest-CRC-0.12.tar.gz' [MSG] [Mon Nov 5 01:55:12 2007] Trying to get 'http://www.cpan.org/authors/id/O/OL/OLIMAUL/CHECKSUMS' [MSG] [Mon Nov 5 01:55:13 2007] Checksum matches for 'Digest-CRC-0.12.tar.gz' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12/lib' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12/lib/Digest' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12/lib/Digest/CRC.pm' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12/Changes' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12/t' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12/t/crc.t' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12/Makefile.PL' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12/README' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12/Build.PL' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12/MANIFEST' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12/CRC.xs' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest-CRC-0.12/META.yml' [MSG] [Mon Nov 5 01:55:13 2007] Extracted 'Digest::CRC' to '/opt/perl/testers/.cpanplus/5.8.8/build/Digest-CRC-0.12' [MSG] [Mon Nov 5 01:55:14 2007] Checking if your kit is complete... Looks good Writing Makefile for Digest::CRC Testing if you have a C compiler [MSG] [Mon Nov 5 01:55:14 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Nov 5 01:55:16 2007] Running Mkbootstrap for Digest::CRC () cp lib/Digest/CRC.pm blib/lib/Digest/CRC.pm Manifying blib/man3/Digest::CRC.3 [ERROR] [Mon Nov 5 01:55:17 2007] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/crc.... # Failed test 'OO crc32 with addfile 1304913126' # at t/crc.t line 48. # Looks like you failed 1 test of 20. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 9 Failed 1/20 tests, 95.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/crc.t 1 256 20 1 9 Failed 1/1 test scripts. 1/20 subtests failed. Files=1, Tests=20, 1 wallclock secs ( 0.14 cusr + 0.01 csys = 0.15 CPU) Failed 1/1 test programs. 1/20 subtests failed. make: *** [test_dynamic] Error 1 [MSG] [Mon Nov 5 01:55:17 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
