This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear EKKIP, This is a computer-generated error report created automatically by CPANPLUS, version 0.83_09. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Dec 5 02:03:51 2007] Trying to get 'http://www.cpan.org/authors/id/E/EK/EKKIP/CHECKSUMS' [MSG] [Wed Dec 5 02:03:52 2007] Checksum matches for 'HAM-Device-IcomCIV-0.02.tar.gz' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM-Device-IcomCIV-0.02/' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM-Device-IcomCIV-0.02/lib/' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM-Device-IcomCIV-0.02/lib/HAM/' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM-Device-IcomCIV-0.02/lib/HAM/Device/' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM-Device-IcomCIV-0.02/lib/HAM/Device/IcomCIV.pm' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM-Device-IcomCIV-0.02/Changes' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM-Device-IcomCIV-0.02/Makefile.PL' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM-Device-IcomCIV-0.02/README' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM-Device-IcomCIV-0.02/META.yml' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM-Device-IcomCIV-0.02/t/' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM-Device-IcomCIV-0.02/t/HAM-Device-IcomCIV.t' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM-Device-IcomCIV-0.02/MANIFEST' [MSG] [Wed Dec 5 02:03:52 2007] Extracted 'HAM::Device::IcomCIV' to '/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/HAM-Device-IcomCIV-0.02' [MSG] [Wed Dec 5 02:03:53 2007] Checking if your kit is complete... Looks good Writing Makefile for HAM::Device::IcomCIV [MSG] [Wed Dec 5 02:03:53 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Dec 5 02:03:56 2007] cp lib/HAM/Device/IcomCIV.pm blib/lib/HAM/Device/IcomCIV.pm Manifying blib/man3/HAM::Device::IcomCIV.3 [ERROR] [Wed Dec 5 02:03:59 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl5.10.00/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/HAM-Device-IcomCIV...... # Failed test 'use HAM::Device::IcomCIV;' # at t/HAM-Device-IcomCIV.t line 9. # Tried to use 'HAM::Device::IcomCIV'. # Error: Can't locate HAM/Device/IcomCIVSerialIO.pm in @INC (@INC contains: /home/cpan/perl5.10.00/.cpanplus/5.10.0/build/HAM-Device-IcomCIV-0.02/blib/lib /home/cpan/perl5.10.00/.cpanplus/5.10.0/build/HAM-Device-IcomCIV-0.02/blib/arch /home/cpan/perl5.10.00/.cpanplus/5.10.0/build/HAM-Device-IcomCIV-0.02/blib /home/cpan/perl5.10.00/lib/5.10.0/i686-linux-thread-multi-64int-ld /home/cpan/perl5.10.00/lib/5.10.0 /home/cpan/perl5.10.00/lib/site_perl/5.10.0/i686-linux-thread-multi-64int-ld /home/cpan/perl5.10.00/lib/site_perl/5.10.0 .) at /home/cpan/perl5.10.00/.cpanplus/5.10.0/build/HAM-Device-IcomCIV-0.02/blib/lib/HAM/Device/IcomCIV.pm line 105. # BEGIN failed--compilation aborted at t/HAM-Device-IcomCIV.t line 9. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Undefined subroutine &HAM::Device::IcomCIV::get_civ_adress called at t/HAM-Device-IcomCIV.t line 19. # Looks like you planned 14 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 14/14 subtests Test Summary Report ------------------- t/HAM-Device-IcomCIV.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test number(s): 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 14 tests but ran 1. Files=1, Tests=1, 0 wallclock secs ( 0.01 usr 0.02 sys + 0.06 cusr 0.03 csys = 0.12 CPU) Result: FAIL Failed 1/1 test programs. 1/1 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Wed Dec 5 02:03:59 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: HAM::Device::IcomCIVSerialIO As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'EKKIP ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'HAM::Device::IcomCIVSerialIO' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_US LC_COLLATE = C PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib/java/bin:/usr/lib/java/jre/bin:. PERL5LIB = :/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/HAM-Device-IcomCIV-0.02/blib/lib:/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/HAM-Device-IcomCIV-0.02/blib/arch:/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/HAM-Device-IcomCIV-0.02/blib PERL5_CPANPLUS_IS_RUNNING = 18491 PERL5_CPANPLUS_IS_VERSION = 0.83_09 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen.linux Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl5.10.00/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 100 11 17 18 19 83 100 EGID: $) = 100 11 17 18 19 83 100 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=linux, osvers=2.6.21.5-smp, archname=i686-linux-thread-multi-64int-ld uname='linux penguin 2.6.21.5-smp #2 smp tue jun 19 14:58:11 cdt 2007 i686 amd athlon(tm) 64 processor 3000+ authenticamd gnulinux ' config_args='-de -Dprefix=/home/cpan/perl5.10.00 -Dusethreads -Duse64bitint -Duselongdouble -Dusemymalloc' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=define usemymalloc=y, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.5.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
