This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Philip Gwyn, This is a computer-generated report for POE-XUL-0.0300 on perl-5.9.5, created automatically by CPAN-Reporter-1.0601 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems with your distribution. If these results are not what you expect or if you would like to learn how to avoid FAIL reports for missing dependencies, unsupported operating systems, etc., please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: http://cpantest.grango.org Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/perl/pNaGaP6/[EMAIL PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_compile..............ok t/10_node.................ok t/11_mixedmode............ok t/20_changemanager........# The following warning about an unknown child may be ignored Attempt to remove an unknown child node at t/20_changemanager.t line 166 ok t/21_cm_instructions......ok t/22_cm_leaks.............# The following warning about an unknown child may be ignored Attempt to remove an unknown child node at t/22_cm_leaks.t line 54 ok t/23_cm_cycle.............ok t/25_event................ok t/30_logging..............ok t/31_log_poe..............ok t/32_log_4_perl...........ok t/50_poe..................# sleep 5 # http://localhost:8881 ok t/51_error................# # # We are testing several error conditions. Because of this you are # going to see some error messages. These may be ignored # # sleep 5 # http://localhost:8881 404 <html> <head><title>404 absent</title></head> <body> <h1>Écheque au démarrage</h1> <p>Application inconue : Bad</p> </body> </html> 410 <html> <head><title>410 absent</title></head> <body> <h1>Session inexistante</h1> <p>La session <tt>honk-honk</tt> n'existe pas. Elle doit être expirée.</p> </body> </html> 415 Error while argument parsing: Unsupported Media Type (415) 405 Error while argument parsing: Method Not Allowed (405) 400 Error while argument parsing: Bad Request (400) ok t/55_concurrent...........# prog=/usr/local/bin/perl -Iblib/lib t/test-app.pl 8881 t-tmp # sleep 5 # STDERR Can't locate MIME/Types.pm in @INC (@INC contains: blib/lib /home/sand/.cpan/build/POE-XUL-0.0300-ivvYMF/blib/lib /home/sand/.cpan/build/POE-XUL-0.0300-ivvYMF/blib/arch /usr/local/perl-5.8.7/lib/5.8.7/i686-linux-64int /usr/local/perl-5.8.7/lib/5.8.7 /usr/local/perl-5.8.7/lib/site_perl/5.8.7/i686-linux-64int /usr/local/perl-5.8.7/lib/site_perl/5.8.7 /usr/local/perl-5.8.7/lib/site_perl .) at blib/lib/POE/Component/XUL.pm line 16. # STDERR BEGIN failed--compilation aborted at blib/lib/POE/Component/XUL.pm line 16. # STDERR Compilation failed in require at t/test-app.pl line 8. # STDERR BEGIN failed--compilation aborted at t/test-app.pl line 8. # Failed test ''boot' successful' # at t/Client.pm line 55. # Failed test 'Right content type' # at t/Client.pm line 57. # got: '' # expected: 'application/json' <html> <HEAD><TITLE>Error: Internal Server Error</TITLE></HEAD> <BODY> <H1>Error: Internal Server Error</H1> Cannot connect to localhost:8881 (connect error 111: Verbindungsaufbau abgelehnt) </BODY> </HTML> # Looks like you failed 2 tests of 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 2/2 subtests t/56_timeout..............# sleep 5 # http://localhost:8881 at t/test-timeout.pl line 21. # sleep 10 # _stop at t/test-timeout.pl line 69. 410 <html> <head><title>410 absent</title></head> <body> <h1>Session inexistante</h1> <p>La session <tt>zZ462INqfyiLvWp-jV-YmA</tt> n'existe pas. Elle doit être expirée.</p> </body> </html> ok t/60_static...............# sleep 5 # http://localhost:8881 ok t/61_error................# # # We are testing several error conditions. Because of this you are # going to see some error messages. These may be ignored # # sleep 5 # http://localhost:8881 405 Error while POST: Method Not Allowed (405) 404 <html> <head><title>404 N'existe pas</title></head> <body> <h1>Le fichier que vous cherchez ne semble pas exister.</h1> <pre>Unknown file 'poe-xul/xul/HONK/bonk/ZONK'</pre> </body> </html> ok t/62_build_file...........ok t/80_application..........# sleep 5 # http://localhost:8881 # Clicking button # Clicking button2 # Clicking honk # Clicking HONK ok t/81_window...............# sleep 5 # http://localhost:8881 # Clicking open_it This is sub-window-1 desc.id=PX9 at t/window.pl line 117. # Clicking close_it # Clicking open_it This is sub-window-2 desc.id=PX13 at t/window.pl line 117. # Clicking open_it This is sub-window-3 desc.id=PX17 at t/window.pl line 117. # Clicking close_me3 # Clicking open_better # Clicking open_better ok t/90_complete.............# sleep 3 # http://localhost:8881 Use of uninitialized value $msg[1] in join or string at blib/lib/POE/XUL/Logging.pm line 206. Use of uninitialized value $msg[1] in join or string at blib/lib/POE/XUL/Logging.pm line 206. ok t/95_searchlist...........# sleep 5 # http://localhost:8881 ok Test Summary Report ------------------- t/55_concurrent.t (Wstat: 65280 Tests: 2 Failed: 2) Failed test number(s): 1-2 Non-zero exit status: 255 Files=22, Tests=1795, 84 wallclock secs ( 1.02 usr 0.06 sys + 18.14 cusr 1.16 csys = 20.38 CPU) Result: FAIL Failed 1/22 test programs. 2/1795 subtests failed. make: *** [test_dynamic] Fehler 255 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ---------------------------- ------ ------- Carp 0 1.07 Digest::MD5 2.3 2.36_01 HTTP::Date 1.4 1.47 HTTP::Status 1 1.28 JSON::XS 0.8 2.01 MIME::Types 0 1.22 POE 0.9500 0.9999 POE::Component::Server::HTTP 0.09 0.09 Scalar::Util 1.13 1.19 Test::More 0.60 0.72 Time::HiRes 1 1.9711 Unicode::String 2 2.09 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = de_DE.UTF-8 PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 22669 PERL5_CPAN_IS_RUNNING = 22669 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /home/src/perl/repoperls/installed-perls/perl/pNaGaP6/[EMAIL PROTECTED]/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------- CPAN 1.92_53 Cwd 3.25 ExtUtils::CBuilder 0.19 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.42 ExtUtils::Manifest 1.51_01 ExtUtils::ParseXS 2.18 File::Spec 3.25 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 3.05 Test::More 0.72 YAML 0.65 YAML::Syck 0.97 version 0.7203 -- Summary of my perl5 (revision 5 version 9 subversion 5) configuration: Platform: osname=linux, osvers=2.6.22-1-k7, archname=i686-linux-64int uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686 gnulinux ' config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/pNaGaP6/[EMAIL PROTECTED] -Dinstallusrbinperl=n -Uversiononly -Doptimize=-g -des -Duse64bitint -Dusedevel' hint=recommended, useposix=true, d_sigaction=define useithreads=undef, usemultiplicity=undef useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g', cppflags='-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib /usr/lib64 libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc libc=/lib/libc-2.6.1.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.6.1' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -g -L/usr/local/lib'
