This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear CTBROWN, This is a computer-generated error report created automatically by CPANPLUS, version 0.80. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Dec 13 20:33:53 2007] Trying to get 'http://www.cpan.org/authors/id/C/CT/CTBROWN/CHECKSUMS' [MSG] [Thu Dec 13 20:33:57 2007] Checksum matches for 'Perl6-Slurp-Interpret-0.10.tar.gz' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6-Slurp-Interpret-0.10/' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6-Slurp-Interpret-0.10/MANIFEST' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6-Slurp-Interpret-0.10/Changes' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6-Slurp-Interpret-0.10/lib/' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6-Slurp-Interpret-0.10/lib/Perl6/' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6-Slurp-Interpret-0.10/lib/Perl6/Slurp/' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6-Slurp-Interpret-0.10/lib/Perl6/Slurp/Interpret.pm' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6-Slurp-Interpret-0.10/t/' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6-Slurp-Interpret-0.10/t/Perl6-Slurp-Interpret.t' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6-Slurp-Interpret-0.10/README' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6-Slurp-Interpret-0.10/Makefile.PL' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6-Slurp-Interpret-0.10/META.yml' [MSG] [Thu Dec 13 20:33:57 2007] Extracted 'Perl6::Slurp::Interpret' to '/home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-Interpret-0.10' [MSG] [Thu Dec 13 20:33:58 2007] Checking if your kit is complete... Looks good Warning: prerequisite Inline::Files 0 not found. Warning: prerequisite Perl6::Slurp 0 not found. Writing Makefile for Perl6::Slurp::Interpret [MSG] [Thu Dec 13 20:33:58 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Dec 13 20:33:58 2007] Module 'Perl6::Slurp::Interpret' requires 'Inline::Files' version '0' to be installed [MSG] [Thu Dec 13 20:33:58 2007] Module 'Perl6::Slurp::Interpret' requires 'Perl6::Slurp' version '0' to be installed [MSG] [Thu Dec 13 20:33:58 2007] Trying to get 'http://www.cpan.org/authors/id/D/DC/DCONWAY/CHECKSUMS' [MSG] [Thu Dec 13 20:34:01 2007] Checksum matches for 'Inline-Files-0.62.tar.gz' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/Changes' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/demo/' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/demo/demo_multiple.pl' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/demo/demo_nowrite.pl' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/demo/demo_persistence.pl' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/demo/demo_persistence_simple.pl' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/demo/demo_simple.pl' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/demo/demo_singles.pl' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/demo/demo_virtual.pl' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/demo/demo_write.pl' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/demo/demo_XML' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/demo/XML.xml' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/lib/' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/lib/Inline/' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/lib/Inline/Files/' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/lib/Inline/Files/Virtual.pm' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/lib/Inline/Files.pm' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/Makefile.PL' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/MANIFEST' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/README' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/t/' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/t/00init.t' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/t/01basics.t' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/t/02write.t' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/t/03nowrite.t' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/t/04create.t' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/t/05seek.t' [MSG] [Thu Dec 13 20:34:01 2007] Extracted 'Inline-Files-0.62/t/06backup.t' [MSG] [Thu Dec 13 20:34:02 2007] Extracted 'Inline-Files-0.62/t/07hash.t' [MSG] [Thu Dec 13 20:34:02 2007] Extracted 'Inline-Files-0.62/tests/' [MSG] [Thu Dec 13 20:34:02 2007] Extracted 'Inline-Files-0.62/tests/01basics.t' [MSG] [Thu Dec 13 20:34:02 2007] Extracted 'Inline-Files-0.62/tests/02write.t' [MSG] [Thu Dec 13 20:34:02 2007] Extracted 'Inline-Files-0.62/tests/03nowrite.t' [MSG] [Thu Dec 13 20:34:02 2007] Extracted 'Inline-Files-0.62/tests/04create.t' [MSG] [Thu Dec 13 20:34:02 2007] Extracted 'Inline-Files-0.62/tests/05seek.t' [MSG] [Thu Dec 13 20:34:02 2007] Extracted 'Inline-Files-0.62/tests/06backup.t' [MSG] [Thu Dec 13 20:34:02 2007] Extracted 'Inline-Files-0.62/tests/07hash.t' [MSG] [Thu Dec 13 20:34:02 2007] Extracted 'Inline::Files' to '/home/cpan/.cpanplus/5.8.8/build/Inline-Files-0.62' [MSG] [Thu Dec 13 20:34:02 2007] Checking if your kit is complete... Looks good Writing Makefile for Inline::Files [MSG] [Thu Dec 13 20:34:02 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Dec 13 20:34:05 2007] cp lib/Inline/Files.pm blib/lib/Inline/Files.pm cp lib/Inline/Files/Virtual.pm blib/lib/Inline/Files/Virtual.pm Manifying blib/man3/Inline::Files.3 Manifying blib/man3/Inline::Files::Virtual.3 [MSG] [Thu Dec 13 20:34:09 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00init.......ok t/01basics.....ok t/02write......ok t/03nowrite....ok t/04create.....ok t/05seek.......ok t/06backup.....ok t/07hash.......ok All tests successful. Files=8, Tests=67, 4 wallclock secs ( 3.57 cusr + 0.36 csys = 3.93 CPU) [MSG] [Thu Dec 13 20:34:10 2007] Successfully sent 'pass' report for 'Inline-Files-0.62' [MSG] [Thu Dec 13 20:34:10 2007] Trying to get 'http://www.cpan.org/authors/id/D/DC/DCONWAY/Perl6-Slurp-0.03.tar.gz' [MSG] [Thu Dec 13 20:34:10 2007] Trying to get 'http://www.cpan.org/authors/id/D/DC/DCONWAY/CHECKSUMS' [MSG] [Thu Dec 13 20:34:14 2007] Checksum matches for 'Perl6-Slurp-0.03.tar.gz' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/Changes' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/Makefile.PL' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/MANIFEST' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/README' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/Slurp.pm' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/t' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/t/chomp.t' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/t/errors.t' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/t/filehandle.t' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/t/filename.t' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/t/ioderfile.t' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/t/iofile.t' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/t/ipc.t' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/t/irs.t' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/t/layers.t' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/t/lexfilehandle.t' [MSG] [Thu Dec 13 20:34:14 2007] Extracted 'Perl6-Slurp-0.03/t/string.t' [MSG] [Thu Dec 13 20:34:15 2007] Extracted 'Perl6::Slurp' to '/home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-0.03' [MSG] [Thu Dec 13 20:34:15 2007] Checking if your kit is complete... Looks good Warning: prerequisite Perl6::Export 0.07 not found. Writing Makefile for Perl6::Slurp [MSG] [Thu Dec 13 20:34:15 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Dec 13 20:34:15 2007] Module 'Perl6::Slurp' requires 'Perl6::Export' version '0.07' to be installed [MSG] [Thu Dec 13 20:34:15 2007] Trying to get 'http://www.cpan.org/authors/id/D/DC/DCONWAY/CHECKSUMS' [MSG] [Thu Dec 13 20:34:18 2007] Checksum matches for 'Perl6-Export-0.07.tar.gz' [MSG] [Thu Dec 13 20:34:18 2007] Extracted 'Perl6-Export-0.07' [MSG] [Thu Dec 13 20:34:18 2007] Extracted 'Perl6-Export-0.07/Changes' [MSG] [Thu Dec 13 20:34:18 2007] Extracted 'Perl6-Export-0.07/Export.pm' [MSG] [Thu Dec 13 20:34:18 2007] Extracted 'Perl6-Export-0.07/Makefile.PL' [MSG] [Thu Dec 13 20:34:18 2007] Extracted 'Perl6-Export-0.07/MANIFEST' [MSG] [Thu Dec 13 20:34:18 2007] Extracted 'Perl6-Export-0.07/README' [MSG] [Thu Dec 13 20:34:18 2007] Extracted 'Perl6-Export-0.07/t' [MSG] [Thu Dec 13 20:34:18 2007] Extracted 'Perl6-Export-0.07/t/1.t' [MSG] [Thu Dec 13 20:34:18 2007] Extracted 'Perl6-Export-0.07/t/lib' [MSG] [Thu Dec 13 20:34:18 2007] Extracted 'Perl6-Export-0.07/t/lib/TestModule.pm' [MSG] [Thu Dec 13 20:34:18 2007] Extracted 'Perl6::Export' to '/home/cpan/.cpanplus/5.8.8/build/Perl6-Export-0.07' [MSG] [Thu Dec 13 20:34:19 2007] Checking if your kit is complete... Looks good Writing Makefile for Perl6::Export [MSG] [Thu Dec 13 20:34:19 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Dec 13 20:34:20 2007] cp Export.pm blib/lib/Perl6/Export.pm Manifying blib/man3/Perl6::Export.3 [MSG] [Thu Dec 13 20:34:21 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/1....ok All tests successful. Files=1, Tests=5, 0 wallclock secs ( 0.25 cusr + 0.02 csys = 0.27 CPU) [MSG] [Thu Dec 13 20:34:21 2007] Ok, not sending test report [MSG] [Thu Dec 13 20:34:23 2007] cp Slurp.pm blib/lib/Perl6/Slurp.pm Manifying blib/man3/Perl6::Slurp.3 [MSG] [Thu Dec 13 20:34:27 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/chomp............ok t/errors...........ok t/filehandle.......ok t/filename.........ok t/ioderfile........ok t/iofile...........ok t/ipc..............ok t/irs..............ok t/layers...........ok t/lexfilehandle....ok t/string...........ok All tests successful. Files=11, Tests=171, 4 wallclock secs ( 3.04 cusr + 0.59 csys = 3.63 CPU) [MSG] [Thu Dec 13 20:34:28 2007] Ok, not sending test report [MSG] [Thu Dec 13 20:34:29 2007] cp lib/Perl6/Slurp/Interpret.pm blib/lib/Perl6/Slurp/Interpret.pm Manifying blib/man3/Perl6::Slurp::Interpret.3 [ERROR] [Thu Dec 13 20:34:30 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Perl6-Slurp-Interpret.... # Failed test 'use Inline::Files;' # at t/Perl6-Slurp-Interpret.t line 10. # Tried to use 'Inline::Files'. # Error: Could not vf_load '/home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-Interpret-0.10/(eval 9)' at /home/cpan/.cpanplus/5.8.8/build/Inline-Files-0.62/blib/lib/Inline/Files.pm line 39 # BEGIN failed--compilation aborted at t/Perl6-Slurp-Interpret.t line 10. Name "main::SQL" used only once: possible typo at t/Perl6-Slurp-Interpret.t line 19. readline() on unopened filehandle SQL at /home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/lib/Perl6/Slurp.pm line 98. # Looks like you planned 2 tests but ran 1 extra. # Looks like you failed 1 test of 3 run. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED tests 2-3 Failed 2/2 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/Perl6-Slurp-Interpret.t 1 256 2 2 2-3 Failed 1/1 test scripts. 0/2 subtests failed. Files=1, Tests=2, 0 wallclock secs ( 0.32 cusr + 0.04 csys = 0.36 CPU) Failed 1/1 test programs. 0/2 subtests failed. gmake: *** [test_dynamic] Error 1 [MSG] [Thu Dec 13 20:34:30 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Inline::Files 0.62 0 Perl6::Slurp 0.03 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/Inline-Files-0.62/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Inline-Files-0.62/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Inline-Files-0.62/blib:/home/cpan/.cpanplus/5.8.8/build/Inline-Files-0.62/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Inline-Files-0.62/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Inline-Files-0.62/blib:/home/cpan/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib:/home/cpan/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib:/home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib:/home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib:/home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-Interpret-0.10/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-Interpret-0.10/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Perl6-Slurp-Interpret-0.10/blib PERL5_CPANPLUS_IS_RUNNING = 14783 PERL5_CPANPLUS_IS_VERSION = 0.80 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/pkg/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl588/bin/perl UID: $< = 1002 EUID: $> = 1002 GID: $( = 100 100 EGID: $) = 100 100 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 [EMAIL PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-R/home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int/CORE' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
