This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to [EMAIL PROTECTED] to keep other
test volunteers informed and to prevent any duplicate effort.
--
This is an error report generated automatically by CPANPLUS,
version 0.050.
Below is the error stack during 'make test':
C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib\lib', 'blib\arch')" t\capacity.t t\default.t t\weighted.t
t\capacity....dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-53
Failed 53/53 tests, 0.00% okay
t\default.....dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 8-58
Failed 51/58 tests, 12.07% okay
t\weighted....dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 5-57
Failed 53/57 tests, 7.02% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t\capacity.t 255 65280 53 102 192.45% 1-53
t\default.t 255 65280 58 102 175.86% 8-58
t\weighted.t 255 65280 57 105 184.21% 5-57
Microsoft (R) Program Maintenance Utility Version 6.00.8168.0
Copyright (C) Microsoft Corp 1988-1998. All rights reserved.
# Failed test (t\capacity.t at line 3)
# Tried to use 'Graph::Weighted::Capacity'.
# Error: Can't locate Graph/Weighted/Capacity.pm in @INC (@INC contains:
C:\Documents and Settings\_\Application
Data\.cpanplus\5.6.1\build\Graph-Weighted-0.11\blib\lib C:\Documents and
Settings\_\Application Data\.cpanplus\5.6.1\build\Graph-Weighted-0.11\blib\arch
C:\Documents and Settings\_\Application
Data\.cpanplus\5.6.1\build\Graph-Weighted-0.11\blib\lib C:\Documents and
Settings\_\Application Data\.cpanplus\5.6.1\build\Graph-Weighted-0.11\blib\arch
C:/Perl/lib C:/Perl/site/lib . C:/Perl/lib C:/Perl/site/lib .) at (eval 1) line 2.
# Failed test (t\capacity.t at line 28)
# with no arguments isn't defined
# Failed test (t\capacity.t at line 37)
# with empty arrayref data isn't defined
# Failed test (t\capacity.t at line 44)
# with empty hashref data isn't defined
Can't locate object method "new" via package "Graph::Weighted::Capacity" (perhaps you
forgot to load "Graph::Weighted::Capacity"?) at t\capacity.t line 47.
# Looks like you planned 53 tests but only ran 4.
# Looks like your test died just after 4.
Can't locate object method "edge_attr" via package "Graph::Weighted" (perhaps you
forgot to load "Graph::Weighted"?) at t\default.t line 69.
# Looks like you planned 58 tests but only ran 7.
# Looks like your test died just after 7.
# Failed test (t\weighted.t at line 50)
Can't locate object method "weight_data" via package "Graph::Weighted" (perhaps you
forgot to load "Graph::Weighted"?) at t\weighted.t line 51.
# Looks like you planned 57 tests but only ran 5.
# Looks like your test died just after 5.
Failed 3/3 test scripts, 0.00% okay. 157/168 subtests failed, 6.55% okay.
NMAKE : fatal error U1077: 'C:\Perl\bin\perl.exe' : return code '0x2'
Stop.
Additional comments:
Hello, Gene Boggs! Thanks for uploading your works to CPAN.
I noticed that the test suite seem to fail without these modules:
Graph::Weighted::Capacity
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'Gene Boggs ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'Graph::Weighted::Capacity' => '0', # or a minimum workable version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/search?dist=ExtUtils-AutoInstall> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. Also, because many people perform automatic
tests on CPAN, chances are that you will receive identical messages
about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional information, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
--
Summary of my perl5 (revision 5 version 6 subversion 1) configuration:
Platform:
osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread
uname=''
config_args='undef'
hint=recommended, useposix=true, d_sigaction=undef
usethreads=undef use5005threads=undef useithreads=define usemultiplicity=define
useperlio=undef d_sfio=undef uselargefiles=undef usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
Compiler:
cc='cl', ccflags ='-nologo -O1 -MD -DNDEBUG -DWIN32 -D_CONSOLE -DNO_STRICT
-DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DPERL_MSVCRT_READFIX',
optimize='-O1 -MD -DNDEBUG',
cppflags='-DWIN32'
ccversion='', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=4
alignbytes=8, usemymalloc=n, prototype=define
Linker and Libraries:
ld='link', ldflags ='-nologo -nodefaultlib -release -libpath:"C:/Perl\lib\CORE"
-machine:x86'
libpth="C:\Program Files\Microsoft Visual Studio\VC98\mfc\lib" "C:\Program
Files\Microsoft Visual Studio\VC98\lib" "C:\Perl\lib\CORE"
libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib
advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib wsock32.lib
mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib
perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib
wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib
libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl56.lib
Dynamic Linking:
dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -release
-libpath:"C:/Perl\lib\CORE" -machine:x86'
