This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Yuval Kogman,
This is a computer-generated report for Test-TAP-Model-0.09
on perl-5.11.0, created automatically by CPAN-Reporter-1.0601
and sent to the CPAN Testers mailing list.
If you have received this email directly, it is because the person testing
your distribution chose to send a copy to your CPAN email address; there
may be a delay before the official report is received and processed
by CPAN Testers.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems with your distribution. If these results are
not what you expect or if you would like to learn how to avoid FAIL
reports for missing dependencies, unsupported operating systems, etc.,
please consult "Notes for CPAN Authors" on the CPAN Testers Wiki:
http://cpantest.grango.org
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
[none provided]
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
make[3]: Entering directory `/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4'
PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib',
'blib/arch')" t/*.t
t/basic..............
# Failed test 'use Test::TAP::Model;'
# at t/basic.t line 10.
# Tried to use 'Test::TAP::Model'.
# Error: Base class package "Test::Harness::Straps" is empty.
# (Perhaps you need to 'use' the module which defines that package first,
# or make that module available in @INC (@INC contains:
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/arch
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/5.11.0/i686-linux-thread-multi-64int
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/5.11.0
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/site_perl/5.11.0/i686-linux-thread-multi-64int
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/site_perl/5.11.0 .).
# at
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib/Test/TAP/Model.pm
line 4
# BEGIN failed--compilation aborted at
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib/Test/TAP/Model.pm
line 4.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Can't locate object method "new" via package "Test::TAP::Model" at t/basic.t
line 12.
# Looks like you planned 35 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 35/35 subtests
t/comprehensive......
# Failed test 'use Test::TAP::Model;'
# at t/comprehensive.t line 14.
# Tried to use 'Test::TAP::Model'.
# Error: Base class package "Test::Harness::Straps" is empty.
# (Perhaps you need to 'use' the module which defines that package first,
# or make that module available in @INC (@INC contains: t/lib
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/arch
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/5.11.0/i686-linux-thread-multi-64int
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/5.11.0
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/site_perl/5.11.0/i686-linux-thread-multi-64int
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/site_perl/5.11.0 .).
# at
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib/Test/TAP/Model.pm
line 4
# BEGIN failed--compilation aborted at
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib/Test/TAP/Model.pm
line 4.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Can't locate object method "new" via package "Test::TAP::Model" at
t/lib/StringHarness.pm line 12.
# Looks like you planned 122 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 122/122 subtests
t/consolidate........
# Failed test 'use Test::TAP::Model::Consolidated;'
# at t/consolidate.t line 11.
# Tried to use 'Test::TAP::Model::Consolidated'.
# Error: Base class package "Test::Harness::Straps" is empty.
# (Perhaps you need to 'use' the module which defines that package first,
# or make that module available in @INC (@INC contains: t/lib
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/arch
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/5.11.0/i686-linux-thread-multi-64int
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/5.11.0
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/site_perl/5.11.0/i686-linux-thread-multi-64int
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/site_perl/5.11.0 .).
# at
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib/Test/TAP/Model.pm
line 4
# BEGIN failed--compilation aborted at
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib/Test/TAP/Model.pm
line 4.
# Compilation failed in require at (eval 4) line 3.
# ...propagated at
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/5.11.0/base.pm line 93.
# BEGIN failed--compilation aborted at
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib/Test/TAP/Model/Consolidated.pm
line 4.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Can't locate object method "new" via package "Test::TAP::Model" at
t/lib/StringHarness.pm line 12.
# Looks like you planned 22 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 22/22 subtests
t/oop_file...........ok
t/oop_subtest........ok
t/pos_guessing.......
# Failed test 'use Test::TAP::Model;'
# at t/pos_guessing.t line 9.
# Tried to use 'Test::TAP::Model'.
# Error: Base class package "Test::Harness::Straps" is empty.
# (Perhaps you need to 'use' the module which defines that package first,
# or make that module available in @INC (@INC contains:
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/arch
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/5.11.0/i686-linux-thread-multi-64int
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/5.11.0
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/site_perl/5.11.0/i686-linux-thread-multi-64int
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/site_perl/5.11.0 .).
# at
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib/Test/TAP/Model.pm
line 4
# BEGIN failed--compilation aborted at
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib/Test/TAP/Model.pm
line 4.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Can't locate object method "new" via package "Test::TAP::Model" at
t/pos_guessing.t line 11.
# Looks like you planned 12 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 12/12 subtests
t/serializable.......
# Failed test 'use Test::TAP::Model;'
# at t/serializable.t line 11.
# Tried to use 'Test::TAP::Model'.
# Error: Base class package "Test::Harness::Straps" is empty.
# (Perhaps you need to 'use' the module which defines that package first,
# or make that module available in @INC (@INC contains:
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/arch
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/5.11.0/i686-linux-thread-multi-64int
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/5.11.0
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/site_perl/5.11.0/i686-linux-thread-multi-64int
/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/lib/site_perl/5.11.0 .).
# at
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib/Test/TAP/Model.pm
line 4
# BEGIN failed--compilation aborted at
/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4/blib/lib/Test/TAP/Model.pm
line 4.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Can't locate object method "new" via package "Test::TAP::Model" at
t/serializable.t line 13.
# Looks like you planned 6 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 6/6 subtests
Test Summary Report
-------------------
t/basic.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 35 tests but ran 1.
t/comprehensive.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 122 tests but ran 1.
t/consolidate.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 22 tests but ran 1.
t/pos_guessing.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 12 tests but ran 1.
t/serializable.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 6 tests but ran 1.
Files=7, Tests=42, 0 wallclock secs ( 0.05 usr 0.01 sys + 0.47 cusr 0.05
csys = 0.58 CPU)
Result: FAIL
Failed 5/7 test programs. 5/42 subtests failed.
make[3]: *** [test_dynamic] Error 255
make[3]: Leaving directory `/home/sand/.cpan/build/Test-TAP-Model-0.09-sSp7O4'
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------- ---- ----
Method::Alias 0 1.03
Test::Harness 2.64 3.06
Test::More 0.53 0.74
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
LANG = en_US.utf8
PATH =
/usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5_CPANPLUS_IS_RUNNING = 15795
PERL5_CPAN_IS_RUNNING = 15795
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED]/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.9205
Cwd 3.2501
ExtUtils::CBuilder 0.21
ExtUtils::Command 1.13
ExtUtils::Install 1.44
ExtUtils::MakeMaker 6.42
ExtUtils::Manifest 1.51_01
ExtUtils::ParseXS 2.18_02
File::Spec 3.2501
Module::Build 0.2808_01
Module::Signature 0.55
Test::Harness 3.06
Test::More 0.74
YAML 0.66
YAML::Syck 1.00
version 0.74
--
Summary of my perl5 (revision 5 version 11 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.22-1-k7, archname=i686-linux-thread-multi-64int
uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686
gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/pQjZ3YC/[EMAIL
PROTECTED] -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db
-Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)',
gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
