This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear RMBARKER,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Wed Jan 2 22:46:52 2008] Trying to get
'ftp://ftp.cpan.org/pub/CPAN/authors/id/R/RM/RMBARKER/Text-CSV-Unicode-0.06.tar.gz'
[MSG] [Wed Jan 2 22:46:55 2008] Trying to get
'ftp://ftp.cpan.org/pub/CPAN/authors/id/R/RM/RMBARKER/CHECKSUMS'
[MSG] [Wed Jan 2 22:46:57 2008] Checksum matches for
'Text-CSV-Unicode-0.06.tar.gz'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text-CSV-Unicode-0.06/'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text-CSV-Unicode-0.06/MANIFEST'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text-CSV-Unicode-0.06/Build.PL'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text-CSV-Unicode-0.06/META.yml'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text-CSV-Unicode-0.06/Makefile.PL'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text-CSV-Unicode-0.06/lib/'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text-CSV-Unicode-0.06/lib/Text/'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text-CSV-Unicode-0.06/lib/Text/CSV/'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted
'Text-CSV-Unicode-0.06/lib/Text/CSV/Unicode.pm'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text-CSV-Unicode-0.06/t/'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text-CSV-Unicode-0.06/t/1.t'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text-CSV-Unicode-0.06/README'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text-CSV-Unicode-0.06/Changes'
[MSG] [Wed Jan 2 22:46:57 2008] Extracted 'Text::CSV::Unicode' to
'/home/cpantester/perl511/.cpanplus/5.11.0/build/Text-CSV-Unicode-0.06'
[MSG] [Wed Jan 2 22:46:57 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Text::CSV 0.01 not found.
Writing Makefile for Text::CSV::Unicode
[MSG] [Wed Jan 2 22:46:57 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Wed Jan 2 22:46:57 2008] Module 'Text::CSV::Unicode' requires
'Text::CSV' version '0.01' to be installed
[MSG] [Wed Jan 2 22:46:57 2008] Trying to get
'ftp://ftp.cpan.org/pub/CPAN/authors/id/M/MA/MAKAMAKA/Text-CSV-1.00.tar.gz'
[MSG] [Wed Jan 2 22:47:00 2008] Trying to get
'ftp://ftp.cpan.org/pub/CPAN/authors/id/M/MA/MAKAMAKA/CHECKSUMS'
[MSG] [Wed Jan 2 22:47:02 2008] Checksum matches for 'Text-CSV-1.00.tar.gz'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/Changes'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/lib/'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/lib/Text/'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/lib/Text/CSV.pm'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/lib/Text/CSV_PP.pm'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/Makefile.PL'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/MANIFEST'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/META.yml'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/README'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/00_pod.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/10_base.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/12_acc.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/15_flags.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/20_file.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/21_lexicalio.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/22_scalario.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/30_types.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/40_misc.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/45_eol.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/50_utf8.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/55_combi.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/60_samples.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/65_allow.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/70_rt.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/80_diag.t'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text-CSV-1.00/t/util.pl'
[MSG] [Wed Jan 2 22:47:02 2008] Extracted 'Text::CSV' to
'/home/cpantester/perl511/.cpanplus/5.11.0/build/Text-CSV-1.00'
[MSG] [Wed Jan 2 22:47:02 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Text::CSV
[MSG] [Wed Jan 2 22:47:02 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Wed Jan 2 22:47:03 2008] cp lib/Text/CSV_PP.pm blib/lib/Text/CSV_PP.pm
cp lib/Text/CSV.pm blib/lib/Text/CSV.pm
Manifying blib/man3/Text::CSV_PP.3
Manifying blib/man3/Text::CSV.3
[MSG] [Wed Jan 2 22:47:05 2008] MAKE TEST passed: PERL_DL_NONLAZY=1
/home/cpantester/perl511/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_pod............ok
t/10_base...........ok
t/12_acc............ok
t/15_flags..........ok
t/20_file...........ok
t/21_lexicalio......ok
t/22_scalario.......ok
t/30_types..........ok
t/40_misc...........ok
t/45_eol............ok
t/50_utf8...........ok
t/55_combi..........ok
t/60_samples........ok
t/65_allow..........ok
t/70_rt.............ok
t/80_diag...........# Next line should be an error message
# CSV_PP ERROR: 2027 - 2027
ok
All tests successful.
Files=16, Tests=10512, 2 wallclock secs ( 0.98 usr 0.05 sys + 2.14 cusr
0.16 csys = 3.33 CPU)
Result: PASS
[MSG] [Wed Jan 2 22:47:05 2008] Sending test report for 'Text-CSV-1.00'
[MSG] [Wed Jan 2 22:47:05 2008] Successfully sent 'pass' report for
'Text-CSV-1.00'
[MSG] [Wed Jan 2 22:47:06 2008] cp lib/Text/CSV/Unicode.pm
blib/lib/Text/CSV/Unicode.pm
Manifying blib/man3/Text::CSV::Unicode.3
[ERROR] [Wed Jan 2 22:47:06 2008] MAKE TEST failed: Illegal seek
PERL_DL_NONLAZY=1 /home/cpantester/perl511/bin/perl "-MExtUtils::Command::MM"
"-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1......
Text::CSV::Unicode is intended as an extension of Text::CSV v0.01,
the only version released by Alan Citterman.
It is not expected to work with Text::CSV v1.00,
as released by Eduardo Rangel Thompson,
marked on CPAN as '** UNAUTHORIZED RELEASE **'.
To suppress this warning, use 'use Text::CSV::Unicode ()'
or 'require Text::CSV::Unicode'.
# Failed test 'succeed'
# at t/1.t line 34.
# Failed test 'succeed'
# at t/1.t line 36.
# Failed test 'succeed'
# at t/1.t line 38.
# Failed test 'succeed'
# at t/1.t line 42.
# Failed test 'succeed'
# at t/1.t line 44.
# Failed test 'succeed'
# at t/1.t line 47.
# Failed test 'succeed'
# at t/1.t line 50.
# Failed test 'success - \n allowed'
# at t/1.t line 77.
# Failed test 'success - test 20 should have succeeded'
# at t/1.t line 80.
# Failed test 'success - embedded \n'
# at t/1.t line 83.
# Failed test 'success - test 22 should have succeeded'
# at t/1.t line 89.
# Looks like you failed 11 tests of 24.
Dubious, test returned 11 (wstat 2816, 0xb00)
Failed 11/24 subtests
Test Summary Report
-------------------
t/1.t (Wstat: 2816 Tests: 24 Failed: 11)
Failed tests: 4-10, 20-23
Non-zero exit status: 11
Files=1, Tests=24, 0 wallclock secs ( 0.01 usr 0.00 sys + 0.03 cusr 0.01
csys = 0.05 CPU)
Result: FAIL
Failed 1/1 test programs. 11/24 subtests failed.
make: *** [test_dynamic] Error 11
[MSG] [Wed Jan 2 22:47:06 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Text::CSV 1.00 0.01
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C
PATH = /home/cpantester/bin:/usr/local/bin:/usr/bin:/bin:/usr/games
PERL5LIB =
/home/cpantester/lib:/home/cpantester/perl511/.cpanplus/5.11.0/build/Text-CSV-1.00/blib/lib:/home/cpantester/perl511/.cpanplus/5.11.0/build/Text-CSV-1.00/blib/arch:/home/cpantester/perl511/.cpanplus/5.11.0/build/Text-CSV-1.00/blib:/home/cpantester/perl511/.cpanplus/5.11.0/build/Text-CSV-1.00/blib/lib:/home/cpantester/perl511/.cpanplus/5.11.0/build/Text-CSV-1.00/blib/arch:/home/cpantester/perl511/.cpanplus/5.11.0/build/Text-CSV-1.00/blib:/home/cpantester/perl511/.cpanplus/5.11.0/build/Text-CSV-Unicode-0.06/blib/lib:/home/cpantester/perl511/.cpanplus/5.11.0/build/Text-CSV-Unicode-0.06/blib/arch:/home/cpantester/perl511/.cpanplus/5.11.0/build/Text-CSV-Unicode-0.06/blib
PERL5_CPANPLUS_IS_RUNNING = 3491
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = linux
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpantester/perl511/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 11 subversion 0 patch 32805)
configuration:
Platform:
osname=linux, osvers=2.6.22-3-amd64, archname=x86_64-linux-thread-multi-ld
uname='linux zippy 2.6.22-3-amd64 #1 smp sun nov 4 18:18:09 utc 2007 x86_64
gnulinux '
config_args='-D prefix=/home/cpantester/perl511/'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.3 20071123 (prerelease) (Debian 4.2.2-4)',
gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t',
lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
