This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Jerome Quelin,
This is a computer-generated report for Language-Befunge-3.03
on perl-5.8.6, created automatically by CPAN-Reporter-1.0601
and sent to the CPAN Testers mailing list.
If you have received this email directly, it is because the person testing
your distribution chose to send a copy to your CPAN email address; there
may be a delay before the official report is received and processed
by CPAN Testers.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems with your distribution. If these results are
not what you expect or if you would like to learn how to avoid FAIL
reports for missing dependencies, unsupported operating systems, etc.,
please consult "Notes for CPAN Authors" on the CPAN Testers Wiki:
http://cpantest.grango.org
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
[none provided]
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1
/home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL
PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib',
'blib/arch')" t/*.t t/*/*.t
t/0-load...........................# Testing Language::Befunge 3.03, Perl
5.008006, /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL
PROTECTED]/bin/perl
ok
t/1-classes/ip.....................ok
t/1-classes/vector.................You tried to run a test without a plan at
t/1-classes/vector.t line 19.
BEGIN failed--compilation aborted at t/1-classes/vector.t line 19.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/2-ops/block_close................ok
t/2-ops/block_open.................ok
t/2-ops/decis_cmp..................ok
t/2-ops/decis_gt...................ok
t/2-ops/decis_horiz_if.............ok
t/2-ops/decis_neg..................ok
t/2-ops/decis_vert_if..............ok
t/2-ops/dir_go_away................ok
t/2-ops/dir_go_east................ok
t/2-ops/dir_go_high................ok
t/2-ops/dir_go_low.................ok
t/2-ops/dir_go_north...............ok
t/2-ops/dir_go_south...............ok
t/2-ops/dir_go_west................ok
t/2-ops/dir_reverse................ok
t/2-ops/dir_set_delta..............ok
t/2-ops/dir_turn_left..............ok
t/2-ops/dir_turn_right.............ok
t/2-ops/flow_comments..............ok
t/2-ops/flow_jump_to...............ok
t/2-ops/flow_kill_thread...........ok
t/2-ops/flow_no_op.................ok
t/2-ops/flow_quit..................ok
t/2-ops/flow_repeat................ok
t/2-ops/flow_space.................ok
t/2-ops/flow_trampoline............ok
t/2-ops/math_addition..............ok
t/2-ops/math_division..............ok
t/2-ops/math_multiplication........ok
t/2-ops/math_remainder.............ok
t/2-ops/math_substraction..........ok
t/2-ops/num_push_number............ok
t/2-ops/stack_clear................ok
t/2-ops/stack_duplicate............ok
t/2-ops/stack_pop..................ok
t/2-ops/stack_swap.................ok
t/2-ops/str_enter_string_mode......ok
t/2-ops/str_fetch_char.............ok
t/2-ops/str_store_char.............ok
t/3-lahey/generic..................You tried to run a test without a plan at
t/3-lahey/generic.t line 19.
BEGIN failed--compilation aborted at t/3-lahey/generic.t line 19.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/3-lahey/lahey....................ok
t/4-interpreter/befunge............ok
t/4-interpreter/trefunge...........ok
t/4-interpreter/unefunge...........ok
t/5-befunge/a-stdio................ok
t/5-befunge/b-nums.................ok
t/5-befunge/c-maths................ok
t/5-befunge/d-dir..................ok
t/5-befunge/e-flow.................ok
t/5-befunge/f-decis................ok
t/5-befunge/g-string...............ok
t/5-befunge/h-stack................ok
t/5-befunge/i-sos..................ok
t/5-befunge/j-storg................ok
t/5-befunge/k-system...............ok
t/5-befunge/l-concur...............ok
t/5-befunge/m-lib..................ok
t/9-author/pod-coverage............ok
t/9-author/pod.....................ok
Test Summary Report
-------------------
t/1-classes/vector.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/3-lahey/generic.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=62, Tests=637, 22 wallclock secs ( 0.80 usr 0.11 sys + 15.68 cusr 1.46
csys = 18.05 CPU)
Result: FAIL
Failed 2/62 test programs. 0/637 subtests failed.
make: *** [test_dynamic] Fehler 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
---------- ---- ----
Storable 0 2.18
Test::More 0 0.74
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
LANG = de_DE.UTF-8
PATH =
/usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5_CPANPLUS_IS_RUNNING = 17077
PERL5_CPAN_IS_RUNNING = 17077
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL
PROTECTED]/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.92_55
Cwd 3.2501
ExtUtils::CBuilder 0.21
ExtUtils::Command 1.13
ExtUtils::Install 1.44
ExtUtils::MakeMaker 6.43_01
ExtUtils::Manifest 1.51
ExtUtils::ParseXS 2.18
File::Spec 3.2501
Module::Build 0.2808
Module::Signature 0.55
Test::Harness 3.06
Test::More 0.74
YAML 0.66
YAML::Syck 0.99
version 0.74
--
Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
Platform:
osname=linux, osvers=2.6.18-4-k7, archname=i686-linux-thread-multi-64int
uname='linux k75 2.6.18-4-k7 #1 smp mon mar 26 17:57:15 utc 2007 i686
gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL
PROTECTED] -Dinstallusrbinperl=n -Uversiononly -des -Dusethreads -Duse64bitint
-Dusedevel -Doptimize=-g -Dnoextensions=Encode'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)',
gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
