This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear BOKUTIN, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Jan 10 12:21:17 2008] Trying to get 'http://www.cpan.org/authors/id/B/BO/BOKUTIN/CHECKSUMS' [MSG] [Thu Jan 10 12:21:19 2008] Checksum matches for 'Data-Faker-JapaneseFemaleName-0.03.tar.gz' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/Changes' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/examples/' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/examples/say_name.pl' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/Module/' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/Module/AutoInstall.pm' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/Module/Install/' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/Module/Install/AutoInstall.pm' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/Module/Install/Base.pm' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/Module/Install/Can.pm' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/Module/Install/Fetch.pm' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/Module/Install/Include.pm' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/Module/Install/Metadata.pm' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/Module/Install/Win32.pm' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/Module/Install/WriteAll.pm' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/inc/Module/Install.pm' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/lib/' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/lib/Data/' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/lib/Data/Faker/' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/lib/Data/Faker/JapaneseFemaleName.pm' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/MANIFEST' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/MANIFEST.SKIP' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/META.yml' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/README' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/t/' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/t/00-load.t' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/t/01-get.t' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/t/boilerplate.t' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/t/pod-coverage.t' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data-Faker-JapaneseFemaleName-0.03/t/pod.t' [MSG] [Thu Jan 10 12:21:20 2008] Extracted 'Data::Faker::JapaneseFemaleName' to '/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Data-Faker-JapaneseFemaleName-0.03' [ERROR] [Thu Jan 10 12:21:20 2008] Unable to find 'Build.PL' or 'Makefile.PL' for 'Data::Faker::JapaneseFemaleName'; Will default to 'CPANPLUS::Dist::MM' but might be unable to install! [MSG] [Thu Jan 10 12:21:20 2008] No 'Makefile.PL' found - attempting to generate one [MSG] [Thu Jan 10 12:21:22 2008] Checking if your kit is complete... Looks good Writing Makefile for Data::Faker::JapaneseFemaleName [MSG] [Thu Jan 10 12:21:22 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Jan 10 12:21:28 2008] cp lib/Data/Faker/JapaneseFemaleName.pm blib/lib/Data/Faker/JapaneseFemaleName.pm Manifying blib/man3/Data::Faker::JapaneseFemaleName.3 [ERROR] [Thu Jan 10 12:21:36 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl5.10.00/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load........... # Failed test 'use Data::Faker::JapaneseFemaleName;' # at t/00-load.t line 6. # Tried to use 'Data::Faker::JapaneseFemaleName'. # Error: Can't locate object method "register_plugin" via package "Data::Faker::JapaneseFemaleName" at /home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Data-Faker-JapaneseFemaleName-0.03/blib/lib/Data/Faker/JapaneseFemaleName.pm line 34, <DATA> line 119747. # Compilation failed in require at (eval 3) line 2, <DATA> line 119747. # BEGIN failed--compilation aborted at t/00-load.t line 6. # Testing Data::Faker::JapaneseFemaleName 0.03, Perl 5.010000, /home/cpan/perl5.10.00/bin/perl # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/01-get............ # Failed test 'use Data::Faker;' # at t/01-get.t line 6. # Tried to use 'Data::Faker'. # Error: Can't locate Data/Faker.pm in @INC (@INC contains: /home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Data-Faker-JapaneseFemaleName-0.03/blib/lib /home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Data-Faker-JapaneseFemaleName-0.03/blib/arch /home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Data-Faker-JapaneseFemaleName-0.03/blib /home/cpan/perl5.10.00/lib/5.10.0/i686-linux-thread-multi-64int-ld /home/cpan/perl5.10.00/lib/5.10.0 /home/cpan/perl5.10.00/lib/site_perl/5.10.0/i686-linux-thread-multi-64int-ld /home/cpan/perl5.10.00/lib/site_perl/5.10.0 .) at (eval 3) line 2. # BEGIN failed--compilation aborted at t/01-get.t line 6. Can't locate object method "new" via package "Data::Faker" (perhaps you forgot to load "Data::Faker"?) at t/01-get.t line 9. # Looks like you planned 6 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 6/6 subtests t/boilerplate.......ok t/pod-coverage......skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod...............skipped: Test::Pod 1.14 required for testing POD Test Summary Report ------------------- t/00-load.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/01-get.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 1. Files=5, Tests=5, 5 wallclock secs ( 0.04 usr 0.04 sys + 4.94 cusr 0.23 csys = 5.25 CPU) Result: FAIL Failed 2/5 test programs. 2/5 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Thu Jan 10 12:21:36 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Data::Faker As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'BOKUTIN ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Data::Faker' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_US LC_COLLATE = C PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib/java/bin:/usr/lib/java/jre/bin:. PERL5LIB = :/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Data-Faker-JapaneseFemaleName-0.03/blib/lib:/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Data-Faker-JapaneseFemaleName-0.03/blib/arch:/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Data-Faker-JapaneseFemaleName-0.03/blib PERL5_CPANPLUS_IS_RUNNING = 27029 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen.linux Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl5.10.00/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 100 11 17 18 19 83 100 EGID: $) = 100 11 17 18 19 83 100 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=linux, osvers=2.6.21.5-smp, archname=i686-linux-thread-multi-64int-ld uname='linux penguin 2.6.21.5-smp #2 smp tue jun 19 14:58:11 cdt 2007 i686 amd athlon(tm) 64 processor 3000+ authenticamd gnulinux ' config_args='-e -Dprefix=/home/cpan/perl5.10.00 -Dusethreads -Duse64bitint -Dusemymalloc=n' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.5.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
