This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear HORIUCHI,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sat Jan 12 21:19:19 2008] Trying to get
'http://www.cpan.org/authors/id/H/HO/HORIUCHI/CHECKSUMS'
[MSG] [Sat Jan 12 21:19:20 2008] Checksum matches for
'Sledge-Request-Apache-I18N-0.02.tar.gz'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted 'Sledge-Request-Apache-I18N-0.02/'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted
'Sledge-Request-Apache-I18N-0.02/Changes'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted
'Sledge-Request-Apache-I18N-0.02/lib/'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted
'Sledge-Request-Apache-I18N-0.02/lib/Sledge/'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted
'Sledge-Request-Apache-I18N-0.02/lib/Sledge/Request/'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted
'Sledge-Request-Apache-I18N-0.02/lib/Sledge/Request/Apache/'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted
'Sledge-Request-Apache-I18N-0.02/lib/Sledge/Request/Apache/I18N/'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted
'Sledge-Request-Apache-I18N-0.02/lib/Sledge/Request/Apache/I18N/Upload.pm'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted
'Sledge-Request-Apache-I18N-0.02/lib/Sledge/Request/Apache/I18N.pm'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted
'Sledge-Request-Apache-I18N-0.02/Makefile.PL'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted
'Sledge-Request-Apache-I18N-0.02/MANIFEST'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted
'Sledge-Request-Apache-I18N-0.02/META.yml'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted 'Sledge-Request-Apache-I18N-0.02/t/'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted
'Sledge-Request-Apache-I18N-0.02/t/00_compile.t'
[MSG] [Sat Jan 12 21:19:20 2008] Extracted 'Sledge::Request::Apache::I18N' to
'/home/cpan/perl582/.cpanplus/5.8.2/build/Sledge-Request-Apache-I18N-0.02'
[MSG] [Sat Jan 12 21:19:21 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Sledge::Request::Apache::I18N
[MSG] [Sat Jan 12 21:19:21 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Sat Jan 12 21:19:23 2008] cp lib/Sledge/Request/Apache/I18N.pm
blib/lib/Sledge/Request/Apache/I18N.pm
cp lib/Sledge/Request/Apache/I18N/Upload.pm
blib/lib/Sledge/Request/Apache/I18N/Upload.pm
Manifying blib/man3/Sledge::Request::Apache::I18N.3
[ERROR] [Sat Jan 12 21:19:23 2008] MAKE TEST failed: PERL_DL_NONLAZY=1
/home/cpan/perl582/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
t/00_compile....
# Failed test 'use Sledge::Request::Apache::I18N;'
# at t/00_compile.t line 4.
# Tried to use 'Sledge::Request::Apache::I18N'.
# Error: Base class package "Class::Accessor" is empty.
# (Perhaps you need to 'use' the module which defines that package first.)
# at
/home/cpan/perl582/.cpanplus/5.8.2/build/Sledge-Request-Apache-I18N-0.02/blib/lib/Sledge/Request/Apache/I18N.pm
line 6
# BEGIN failed--compilation aborted at t/00_compile.t line 4.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Looks like you failed 1 test of 1.
dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/00_compile.t 1 256 1 1 1
Failed 1/1 test scripts. 1/1 subtests failed.
Files=1, Tests=1, 0 wallclock secs ( 0.11 cusr + 0.03 csys = 0.14 CPU)
Failed 1/1 test programs. 1/1 subtests failed.
gmake: *** [test_dynamic] Error 1
[MSG] [Sat Jan 12 21:19:23 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::More 0.70 0.32
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH =
/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB =
:/home/cpan/perl582/.cpanplus/5.8.2/build/Sledge-Request-Apache-I18N-0.02/blib/lib:/home/cpan/perl582/.cpanplus/5.8.2/build/Sledge-Request-Apache-I18N-0.02/blib/arch:/home/cpan/perl582/.cpanplus/5.8.2/build/Sledge-Request-Apache-I18N-0.02/blib
PERL5_CPANPLUS_IS_RUNNING = 11570
PERL5_CPANPLUS_IS_VERSION = 0.80
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl582/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5.0 version 8 subversion 2) configuration:
Platform:
osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0:
tue oct 31 04:32:05 utc 2006 [EMAIL
PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop
i386 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -I/usr/pkg/include'
ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib
-L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared
-L/usr/pkg/lib'
