This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Ilya Zakharevich, This is a computer-generated report for Math-Pari-2.010709 on perl-5.8.8, created automatically by CPAN-Reporter-1.0602 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems with your distribution. If these results are not what you expect or if you would like to learn how to avoid FAIL reports for missing dependencies, unsupported operating systems, etc., please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: http://cpantest.grango.org Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/home/mmusgrove/cpantesting/perl-5.8.8/bin/perl Makefile.PL PREFIX=/home/mmusgrove/cpantesting/perl-5.8.8': Did not find GP/PARI build directory around. Do you want to me to fetch GP/PARI automatically? (If you do not, you will need to fetch it manually, and/or direct me to the directory with GP/PARI source via the command-line option paridir=/dir) Make sure you have a large scrollback buffer to see the messages, or `tee' the STDOUT/STDERR to a file. Fetch? (y/n, press Enter) Well, as you wish... Rerun Makefile.PL when you fetched GP/PARI archive manually to the current directory, or a (grand)parent directory of it. [Keep in mind that version of Math::Pari module corresponds to the last versions of GP/PARI it was tested with.] Alternatively, you may specify pari_tgz=PATH_TO_TAR_GZ option to Makefile.PL. (There is no need to extract the archive, or build GP/PARI; but if you have it extracted [and patched, if needed], you may specify paridir=PATH_TO_DIST_DIR option to Makefile.PL) Could not find GP/PARI build directory, please run Makefile.PL with paridir=/directory option. ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: No requirements found ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_US.UTF-8 PATH = /home/mmusgrove/bin:/home/mmusgrove/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PERL5LIB = /home/mmusgrove/cpantesting/perl-5.8.8/.cpan/build/Template-Toolkit-2.19-ZCKBbr/blib/arch:/home/mmusgrove/cpantesting/perl-5.8.8/.cpan/build/Template-Toolkit-2.19-ZCKBbr/blib/lib PERL5_CPANPLUS_IS_RUNNING = 15627 PERL5_CPAN_IS_EXECUTING = /home/mmusgrove/cpantesting/perl-5.8.8/.cpan/build/Math-Pari-2.010709-roPBZq/Makefile.PL PERL5_CPAN_IS_RUNNING = 15627 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = xterm Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /home/mmusgrove/cpantesting/perl-5.8.8/bin/perl $UID/$EUID = 1000 / 1000 $GID = 1000 1004 1000 117 115 110 108 104 46 44 30 29 25 24 20 4 $EGID = 1000 1004 1000 117 115 110 108 104 46 44 30 29 25 24 20 4 Perl module toolchain versions installed: Module Have ------------------- ------ CPAN 1.9205 Cwd 3.2501 ExtUtils::CBuilder 0.21 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.42 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.18 File::Spec 3.2501 Module::Build n/a Module::Signature n/a Test::Harness 3.07 Test::More 0.74 YAML 0.66 YAML::Syck n/a version 0.74 -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.22-14-generic, archname=i686-linux-64int-ld uname='linux mmusgrove 2.6.22-14-generic #1 smp tue dec 18 08:02:57 utc 2007 i686 gnulinux ' config_args='-des -Uversiononly [EMAIL PROTECTED] [EMAIL PROTECTED] -Doptimize=-O2 -Dusemorebits -Dusedevel -Dusenm=false -Darchlib=/home/mmusgrove/cpantesting/perl-5.8.8/lib/5.8.8/i686-linux -Dprivlib=/home/mmusgrove/cpantesting/perl-5.8.8/lib/5.8.8 -Dman1dir=/home/mmusgrove/cpantesting/perl-5.8.8/man/man1 -Dman3dir=/home/mmusgrove/cpantesting/perl-5.8.8/man/man3 -Dprefix=/home/mmusgrove/cpantesting/perl-5.8.8 -Dd_attribut' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc libc=/lib/libc-2.6.1.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.6.1' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
