This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear RURBAN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Jan 18 00:56:15 2008] Trying to get
'http://www.cpan.org/authors/id/R/RU/RURBAN/Tie-CArray-0.13.tar.gz'
[MSG] [Fri Jan 18 00:56:18 2008] Trying to get
'http://www.cpan.org/authors/id/R/RU/RURBAN/CHECKSUMS'
[MSG] [Fri Jan 18 00:56:18 2008] Checksum matches for 'Tie-CArray-0.13.tar.gz'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/CArray.pm'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/CArray.xs'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/Changes'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/Makefile.PL'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/MANIFEST'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/META.yml'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/README'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/t/'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/t/00intarr.t'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/t/01dblarr.t'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/t/02strarr.t'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/t/03intcvt.t'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/Tie-CArray-0.13.txt'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie-CArray-0.13/typemap'
[MSG] [Fri Jan 18 00:56:18 2008] Extracted 'Tie::CArray' to
'/opt/perl/testers/.cpanplus/5.8.8/build/Tie-CArray-0.13'
[MSG] [Fri Jan 18 00:56:19 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Tie::CArray
[MSG] [Fri Jan 18 00:56:19 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Fri Jan 18 00:56:23 2008] cp CArray.pm blib/lib/Tie/CArray.pm
Running Mkbootstrap for Tie::CArray ()
Manifying blib/man3/Tie::CArray.3
[ERROR] [Fri Jan 18 00:56:24 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î
(ioctl) t/00intarr......ok
t/01dblarr...... Failed 8/25 subtests
t/02strarr......ok
t/03intcvt......ok
Test Summary Report
-------------------
t/01dblarr.t (Wstat: 0 Tests: 25 Failed: 8)
Failed tests: 4, 7, 17, 19-22, 24
Files=4, Tests=94, 0 wallclock secs ( 0.01 usr 0.03 sys + 0.17 cusr 0.25
csys = 0.46 CPU)
Result: FAIL
Failed 1/4 test programs. 8/94 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Fri Jan 18 00:56:24 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Tie::Array 1.03 1
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64
gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3
-Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid
-Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)',
gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t',
lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
