This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear LEOCHARRE, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Feb 3 10:15:11 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/L/LE/LEOCHARRE/WordPress-XMLRPC-1.02.tar.gz' [MSG] [Sun Feb 3 10:15:12 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/L/LE/LEOCHARRE/CHECKSUMS' [MSG] [Sun Feb 3 10:15:13 2008] Archive size is not known for 'WordPress-XMLRPC-1.02.tar.gz' [MSG] [Sun Feb 3 10:15:13 2008] No 'md5' checksum known for 'WordPress-XMLRPC-1.02.tar.gz' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/t/' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/t/analize_xmlrpc.pl' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/t/04_XMLRPC_post.t' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/t/02_XMLRPC.t' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/t/00_basic.t' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/t/10_XMLRPC.out' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/t/10_XMLRPC.t.optional' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/t/xmlrpc.php' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/t/test.pl' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/t/04_XMLRPC_page.t' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/MANIFEST' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/lib/' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/lib/WordPress/' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/lib/WordPress/XMLRPC.pm' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/Makefile.PL' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/META.yml' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress-XMLRPC-1.02/README' [MSG] [Sun Feb 3 10:15:13 2008] Extracted 'WordPress::XMLRPC' to '/home/d/.cpanplus/5.10.0/build/WordPress-XMLRPC-1.02' [MSG] [Sun Feb 3 10:15:13 2008] Checking if your kit is complete... Looks good Warning: prerequisite Smart::Comments 0 not found. Writing Makefile for WordPress::XMLRPC [MSG] [Sun Feb 3 10:15:13 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Feb 3 10:15:13 2008] Module 'WordPress::XMLRPC' requires 'Smart::Comments' version '0' to be installed [MSG] [Sun Feb 3 10:15:14 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/D/DC/DCONWAY/CHECKSUMS' [MSG] [Sun Feb 3 10:15:15 2008] Checksum matches for 'Smart-Comments-v1.0.2.tar.gz' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/Build.PL' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/Changes' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/lib/' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/lib/Smart/' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/lib/Smart/Comments.pm' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/Makefile.PL' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/MANIFEST' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/META.yml' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/README' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/00.load.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/assert.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/brackets.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/c_like_for_loop.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/check.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/confirm.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/ensure.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/insist.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/labelled_perlish_loop.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/message.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/perlish_for.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/perlish_for_percentage.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/pod-coverage.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/pod.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/require.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/selective.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/simple_perlish_for.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/var.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/verify.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/while.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart-Comments-v1.0.2/t/while_num.t' [MSG] [Sun Feb 3 10:15:15 2008] Extracted 'Smart::Comments' to '/home/d/.cpanplus/5.10.0/build/Smart-Comments-v1.0.2' [MSG] [Sun Feb 3 10:15:16 2008] Checking if your kit is complete... Looks good Writing Makefile for Smart::Comments [MSG] [Sun Feb 3 10:15:16 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Feb 3 10:15:18 2008] cp lib/Smart/Comments.pm blib/lib/Smart/Comments.pm Manifying blib/man3/Smart::Comments.3 [MSG] [Sun Feb 3 10:15:23 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00.load..................... 1..1 ok 1 - use Smart::Comments; # Testing Smart::Comments 1.0.2 ok t/assert...................... ok 1 - True assertion is silent ok 2 - False assertion is deadly ok 3 - False assertion is deadly silent ok 4 - False assertion is loud ok 5 - False assertion is loudly correct ok 6 - False two-part assertion is deadly ok 7 - False two-part assertion is deadly silent ok 8 - False two-part assertion is loud ok 9 - False two-part assertion is loudly correct 1..9 ok t/brackets.................... ok 1 - Iteration 1 ok 2 - Iteration 2 ok 3 - Iteration 3 ok 4 - Iteration 4 ok 5 - Iteration 5 ok 6 - Iteration 6 ok 7 - Iteration 7 ok 8 - Iteration 8 ok 9 - Iteration 9 ok 10 - Iteration 10 ok 11 - Iteration 11 ok 12 - Iteration 12 ok 13 - Iteration 13 ok 14 - Iteration 14 ok 15 - Iteration 15 ok 16 - Iteration 16 ok 17 - Iteration 17 ok 18 - Iteration 18 ok 19 - Iteration 19 ok 20 - Iteration 20 ok 21 - First iteration ok 22 - Second iteration ok 23 - Thiird iteration 1..23 ok t/c_like_for_loop............. ok 1 - First iteration ok 2 - Second iteration 1..2 ok t/check....................... ok 1 - True check is silent ok 2 - False check not deadly ok 3 - False check is loud ok 4 - False check is loudly correct ok 5 - False two-part check not deadly ok 6 - False two-part check is loud ok 7 - False two-part check is loudly correct 1..7 ok t/confirm..................... ok 1 - True confirm is silent ok 2 - False confirm not deadly ok 3 - False confirm is loud ok 4 - False confirm is loudly correct ok 5 - False two-part confirm not deadly ok 6 - False two-part confirm is loud ok 7 - False two-part confirm is loudly correct 1..7 ok t/ensure...................... ok 1 - True ensure is silent ok 2 - False ensure is deadly ok 3 - False ensure is deadly silent ok 4 - False ensure is loud ok 5 - False ensure is loudly correct ok 6 - False two-part ensure is deadly ok 7 - False two-part ensure is deadly silent ok 8 - False two-part ensure is loud ok 9 - False two-part ensure is loudly correct 1..9 ok t/insist...................... ok 1 - True insist is silent ok 2 - False insist is deadly ok 3 - False insist is deadly silent ok 4 - False insist is loud ok 5 - False insist is loudly correct ok 6 - False two-part insist is deadly ok 7 - False two-part insist is deadly silent ok 8 - False two-part insist is loud ok 9 - False two-part insist is loudly correct 1..9 ok t/labelled_perlish_loop....... ok 1 - Iteration 1 ok 2 - Iteration 2 ok 3 - Iteration 3 ok 4 - First iteration ok 5 - Second iteration 1..5 ok t/message..................... ok 1 - Messages work 1..1 ok t/perlish_for................. ok 1 - Iteration 1 ok 2 - Iteration 2 ok 3 - Iteration 3 ok 4 - First iteration ok 5 - Second iteration 1..5 ok t/perlish_for_percentage...... ok 1 - First iteration ok 2 - Second iteration ok 3 - Third iteration ok 4 - Fourth iteration 1..4 ok t/pod-coverage................ 1..1 ok 1 - Pod coverage on Smart::Comments ok t/pod......................... 1..1 ok 1 - blib/lib/Smart/Comments.pm ok t/require..................... ok 1 - True require is silent ok 2 - False require is deadly ok 3 - False require is deadly silent ok 4 - False require is loud ok 5 - False require is loudly correct ok 6 - False two-part require is deadly ok 7 - False two-part require is deadly silent ok 8 - False two-part require is loud ok 9 - False two-part require is loudly correct 1..9 ok t/selective................... 1..3 ok 1 - Accepts 3 #'s... ok 2 - Accepts 4 #'s... ok 3 - Accepts 6 #'s... ok t/simple_perlish_for.......... ok 1 - Iteration 1 ok 2 - Iteration 2 ok 3 - Iteration 3 ok 4 - First iteration ok 5 - Second iteration 1..5 ok t/var......................... ok 1 - Simple variables work ok 2 - Labelled variables work 1..2 ok t/verify...................... ok 1 - True verify is silent ok 2 - False verify not deadly ok 3 - False verify is loud ok 4 - False verify is loudly correct ok 5 - False two-part verify not deadly ok 6 - False two-part verify is loud ok 7 - False two-part verify is loudly correct 1..7 ok t/while....................... ok 1 - First iteration ok 2 - Second iteration 1..2 ok t/while_num................... ok 1 - First iteration ok 2 - Second iteration ok 3 - Third iteration ok 4 - Fourth iteration ok 5 - Fifth iteration ok 6 - Sixth iteration 1..6 ok All tests successful. Files=21, Tests=118, 5 wallclock secs ( 0.16 usr 0.06 sys + 1.87 cusr 3.02 csys = 5.11 CPU) Result: PASS [MSG] [Sun Feb 3 10:15:23 2008] Sending test report for 'Smart-Comments-v1.0.2' [MSG] [Sun Feb 3 10:15:23 2008] Ok, not sending test report [MSG] [Sun Feb 3 10:15:25 2008] cp lib/WordPress/XMLRPC.pm blib/lib/WordPress/XMLRPC.pm Manifying blib/man3/WordPress::XMLRPC.3 [ERROR] [Sun Feb 3 10:15:26 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_basic............ ok 1 - starting test. ok 2 - see README 1..2 ok t/02_XMLRPC........... ok 1 - starting test. 1..1 Undefined subroutine &main::usage called at t/02_XMLRPC.t line 13. # Looks like your test died just after 1. Dubious, test returned 255 (wstat 65280, 0xff00) All 1 subtests passed t/04_XMLRPC_page...... ok 1 - starting test. ok 2 - see README 1..2 ok t/04_XMLRPC_post...... ok 1 - starting test. ok 2 - see README 1..2 ok Test Summary Report ------------------- t/02_XMLRPC.t (Wstat: 65280 Tests: 1 Failed: 0) Non-zero exit status: 255 Files=4, Tests=7, 1 wallclock secs ( 0.03 usr 0.02 sys + 0.31 cusr 0.46 csys = 0.82 CPU) Result: FAIL Failed 1/4 test programs. 0/7 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Sun Feb 3 10:15:26 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Smart::Comments 1.0.2 0 XMLRPC::Lite 0.0 0 YAML 0.66 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=linux, osvers=2.6.23.1-slh64-smp-32, archname=x86_64-linux uname='linux sanremo.defietser 2.6.23.1-slh64-smp-32 #1 smp preempt thu nov 15 17:55:06 cet 2007 x86_64 gnulinux ' config_args='-des' hint=recommended, useposix=true, d_sigaction=define useithreads=undef, usemultiplicity=undef useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=define, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.2.3 20071014 (prerelease) (Debian 4.2.2-3)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.7' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
