This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear RGARCIA, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Feb 6 20:19:42 2008] Trying to get 'http://www.cpan.org/authors/id/R/RG/RGARCIA/CHECKSUMS' [MSG] [Wed Feb 6 20:19:43 2008] Checksum matches for 'Safe-2.15.tar.gz' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe-2.15/' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe-2.15/META.yml' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe-2.15/t/' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe-2.15/t/safeload.t' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe-2.15/t/safe2.t' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe-2.15/t/safe1.t' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe-2.15/t/safe3.t' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe-2.15/Safe.pm' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe-2.15/Changes' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe-2.15/MANIFEST' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe-2.15/Makefile.PL' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe-2.15/README' [MSG] [Wed Feb 6 20:19:44 2008] Extracted 'Safe' to '/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Safe-2.15' [MSG] [Wed Feb 6 20:19:46 2008] Checking if your kit is complete... Looks good Writing Makefile for Safe [MSG] [Wed Feb 6 20:19:46 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Feb 6 20:19:50 2008] cp Safe.pm blib/arch/Safe.pm Manifying blib/man3/Safe.3 [ERROR] [Wed Feb 6 20:19:54 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/arch', 'blib/arch')" t/*.t t/safe1.......ok t/safe2.......ok t/safe3.......ok t/safeload.... # Failed test 'Can load version.pm in a Safe compartment' # at t/safeload.t line 30. # unpack trapped by operation mask at /Volumes/Media/smoke/perl562/lib/5.6.2/vars.pm line 19. # Compilation failed in require at /Volumes/Media/smoke/perl562/lib/site_perl/5.6.2/darwin-thread-multi/version.pm line 7. # BEGIN failed--compilation aborted at /Volumes/Media/smoke/perl562/lib/site_perl/5.6.2/darwin-thread-multi/version.pm line 7. # Compilation failed in require at (eval 6) line 1. # BEGIN failed--compilation aborted at (eval 6) line 1. # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/safeload.t 1 256 1 1 1 Failed 1/4 test scripts. 1/63 subtests failed. Files=4, Tests=63, 3 wallclock secs ( 0.69 cusr + 0.17 csys = 0.86 CPU) Failed 1/4 test programs. 1/63 subtests failed. [MSG] [Wed Feb 6 20:19:54 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 3.07e-02. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin PERL5LIB = :/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Safe-2.15/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Safe-2.15/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Safe-2.15/blib PERL5_CPANPLUS_IS_EXECUTING = PERL5_CPANPLUS_IS_RUNNING = 15708 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /Volumes/Media/smoke/perl562/bin/perl UID: $< = 502 EUID: $> = 502 GID: $( = 502 502 EGID: $) = 502 502 ------------------------------- -- Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration: Platform: osname=darwin, osvers=8.10.0, archname=darwin-thread-multi uname='darwin bingos-power-mac-g4-agp-graphics.local 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef Compiler: cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include', optimize='-O3', cppflags='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include' ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, usemymalloc=n, prototype=define Linker and Libraries: ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-ldbm -ldl -lm -lc perllibs=-ldl -lm -lc libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a Dynamic Linking: dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
