This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Aran Clary Deltac,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sun Feb 10 03:07:14 2008] Trying to get
'http://www.cpan.org/authors/id/K/KO/KOKOGIKO/Geo-Point-Plugin-Transform-0.0.2.tar.gz'
[MSG] [Sun Feb 10 03:07:16 2008] Trying to get
'http://www.cpan.org/authors/id/K/KO/KOKOGIKO/CHECKSUMS'
[MSG] [Sun Feb 10 03:07:17 2008] Checksum matches for
'Geo-Point-Plugin-Transform-0.0.2.tar.gz'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.2/'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/README'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/Build.PL'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/Makefile.PL'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.2/t/'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/t/01.transform.t'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/t/00.load.t'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/Changes'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/lib/'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/lib/Geo/'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/lib/Geo/Point/'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/lib/Geo/Point/Plugin/'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/lib/Geo/Point/Plugin/Transform.ja.pod'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/lib/Geo/Point/Plugin/Transform.pm'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/META.yml'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted
'Geo-Point-Plugin-Transform-0.0.2/MANIFEST'
[MSG] [Sun Feb 10 03:07:17 2008] Extracted 'Geo::Point::Plugin::Transform' to
'/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Geo-Point-Plugin-Transform-0.0.2'
[MSG] [Sun Feb 10 03:07:21 2008] # running Build.PL
/home/cpan/perl5.10.00/bin/perl Build.PL
- ERROR: Test::Base is not installed
- ERROR: Geo::Point is not installed
- ERROR: Geo::Proj is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Creating new 'Build' script for 'Geo-Point-Plugin-Transform' version '0.0.2'
[MSG] [Sun Feb 10 03:07:21 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Sun Feb 10 03:07:21 2008] Module 'Geo::Point::Plugin::Transform'
requires 'Geo::Point' version '0' to be installed
[MSG] [Sun Feb 10 03:07:21 2008] Module 'Geo::Point::Plugin::Transform'
requires 'Geo::Proj' version '0' to be installed
[MSG] [Sun Feb 10 03:07:21 2008] Module 'Geo::Point::Plugin::Transform'
requires 'Test::Base' version '0' to be installed
[MSG] [Sun Feb 10 03:07:21 2008] Trying to get
'http://www.cpan.org/authors/id/M/MA/MARKOV/Geo-Point-0.06.tar.gz'
[MSG] [Sun Feb 10 03:07:23 2008] Trying to get
'http://www.cpan.org/authors/id/M/MA/MARKOV/CHECKSUMS'
[MSG] [Sun Feb 10 03:07:24 2008] Checksum matches for 'Geo-Point-0.06.tar.gz'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/t/'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/t/22rstr.t'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/t/pod.t'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/t/11point.t'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/t/20pstr.t'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/t/21lstr.t'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/t/09proj.t'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/t/10dms.t'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/lib/'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/lib/Geo/'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/lib/Geo/Shape.pod'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/lib/Geo/Surface.pm'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/lib/Geo/Proj.pm'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/lib/Geo/Proj.pod'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/lib/Geo/Line.pm'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/lib/Geo/Shape.pm'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/lib/Geo/Line.pod'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/lib/Geo/Surface.pod'
[MSG] [Sun Feb 10 03:07:24 2008] Extracted 'Geo-Point-0.06/lib/Geo/Point.pod'
[MSG] [Sun Feb 10 03:07:25 2008] Extracted 'Geo-Point-0.06/lib/Geo/Space.pod'
[MSG] [Sun Feb 10 03:07:25 2008] Extracted 'Geo-Point-0.06/lib/Geo/Space.pm'
[MSG] [Sun Feb 10 03:07:25 2008] Extracted 'Geo-Point-0.06/lib/Geo/Point.pm'
[MSG] [Sun Feb 10 03:07:25 2008] Extracted 'Geo-Point-0.06/README'
[MSG] [Sun Feb 10 03:07:25 2008] Extracted 'Geo-Point-0.06/Makefile.PL'
[MSG] [Sun Feb 10 03:07:25 2008] Extracted 'Geo-Point-0.06/META.yml'
[MSG] [Sun Feb 10 03:07:25 2008] Extracted 'Geo-Point-0.06/ChangeLog'
[MSG] [Sun Feb 10 03:07:25 2008] Extracted 'Geo-Point-0.06/MANIFEST'
[MSG] [Sun Feb 10 03:07:25 2008] Extracted 'Geo::Point' to
'/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Geo-Point-0.06'
[MSG] [Sun Feb 10 03:07:27 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Geo::Distance 0.06 not found.
Warning: prerequisite Geo::Proj4 0.96 not found.
Warning: prerequisite Math::Polygon 0.003 not found.
Writing Makefile for Geo::Point
[MSG] [Sun Feb 10 03:07:27 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Sun Feb 10 03:07:28 2008] Module 'Geo::Point' requires 'Geo::Distance'
version '0.06' to be installed
[MSG] [Sun Feb 10 03:07:28 2008] Module 'Geo::Point' requires 'Geo::Proj4'
version '0.96' to be installed
[MSG] [Sun Feb 10 03:07:28 2008] Module 'Geo::Point' requires 'Math::Polygon'
version '0.003' to be installed
[MSG] [Sun Feb 10 03:07:28 2008] Trying to get
'http://www.cpan.org/authors/id/B/BL/BLUEFEET/Geo-Distance-0.11.tar.gz'
[MSG] [Sun Feb 10 03:07:30 2008] Trying to get
'http://www.cpan.org/authors/id/B/BL/BLUEFEET/CHECKSUMS'
[MSG] [Sun Feb 10 03:07:30 2008] Checksum matches for 'Geo-Distance-0.11.tar.gz'
[MSG] [Sun Feb 10 03:07:30 2008] Extracted 'Geo-Distance-0.11/'
[MSG] [Sun Feb 10 03:07:30 2008] Extracted 'Geo-Distance-0.11/README'
[MSG] [Sun Feb 10 03:07:30 2008] Extracted 'Geo-Distance-0.11/Changes'
[MSG] [Sun Feb 10 03:07:31 2008] Extracted 'Geo-Distance-0.11/test.pl'
[MSG] [Sun Feb 10 03:07:31 2008] Extracted 'Geo-Distance-0.11/Makefile.PL'
[MSG] [Sun Feb 10 03:07:31 2008] Extracted 'Geo-Distance-0.11/Distance.pm'
[MSG] [Sun Feb 10 03:07:31 2008] Extracted 'Geo-Distance-0.11/MANIFEST'
[MSG] [Sun Feb 10 03:07:31 2008] Extracted 'Geo::Distance' to
'/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Geo-Distance-0.11'
[MSG] [Sun Feb 10 03:07:33 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Geo::Distance
[MSG] [Sun Feb 10 03:07:33 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Sun Feb 10 03:07:37 2008] cp Distance.pm blib/lib/Geo/Distance.pm
Manifying blib/man3/Geo::Distance.3
[ERROR] [Sun Feb 10 03:07:38 2008] MAKE TEST failed: Illegal seek
PERL_DL_NONLAZY=1 /home/cpan/perl5.10.00/bin/perl "-Iblib/lib" "-Iblib/arch"
test.pl
Can't locate DBI.pm in @INC (@INC contains: blib/lib blib/arch
/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/lib
/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/arch
/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib
/home/cpan/perl5.10.00/lib/5.10.0/i686-linux-thread-multi-64int-ld
/home/cpan/perl5.10.00/lib/5.10.0
/home/cpan/perl5.10.00/lib/site_perl/5.10.0/i686-linux-thread-multi-64int-ld
/home/cpan/perl5.10.00/lib/site_perl/5.10.0 .) at test.pl line 3.
BEGIN failed--compilation aborted at test.pl line 3.
# Looks like your test died before it could output anything.
make: *** [test_dynamic] Error 255
[MSG] [Sun Feb 10 03:07:38 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
DBI
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'Aran Clary Deltac ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'DBI' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by
POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US
LC_COLLATE = C
PATH =
/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib/java/bin:/usr/lib/java/jre/bin:.
PERL5LIB =
:/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/lib:/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/arch:/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib
PERL5_CPANPLUS_IS_RUNNING = 28885
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.linux
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl5.10.00/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 100 11 17 18 19 83 100
EGID: $) = 100 11 17 18 19 83 100
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.21.5-smp, archname=i686-linux-thread-multi-64int-ld
uname='linux penguin 2.6.21.5-smp #2 smp tue jun 19 14:58:11 cdt 2007 i686
amd athlon(tm) 64 processor 3000+ authenticamd gnulinux '
config_args='-e -Dprefix=/home/cpan/perl5.10.00 -Dusethreads -Duse64bitint
-Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-I/usr/local/include'
ccversion='', gccversion='4.1.2', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12,
Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.5.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.5'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
