This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear RETOH, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Feb 11 15:18:16 2008] Trying to get 'http://www.cpan.org/authors/id/R/RE/RETOH/Geo/Geo-Query-LatLong-0.8009.tar.gz' [MSG] [Mon Feb 11 15:18:19 2008] Trying to get 'http://www.cpan.org/authors/id/R/RE/RETOH/Geo/CHECKSUMS' [MSG] [Mon Feb 11 15:18:20 2008] Checksum matches for 'Geo-Query-LatLong-0.8009.tar.gz' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/ppport.h' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/META.yml' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/LatLong.xs' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/Changes' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/MANIFEST' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/lib/' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/lib/Geo/' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/lib/Geo/Query/' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/lib/Geo/Query/LatLong.pm' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/t/' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/t/Geo-Query-LatLong.t' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/Makefile.PL' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo-Query-LatLong-0.8009/README' [MSG] [Mon Feb 11 15:18:21 2008] Extracted 'Geo::Query::LatLong' to '/home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/Geo-Query-LatLong-0.8009' [MSG] [Mon Feb 11 15:18:23 2008] Checking if your kit is complete... Looks good Writing Makefile for Geo::Query::LatLong [MSG] [Mon Feb 11 15:18:23 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Feb 11 15:18:40 2008] cp lib/Geo/Query/LatLong.pm blib/lib/Geo/Query/LatLong.pm /home/cwill1is/perl5.10.0/bin/perl.exe /home/cwill1is/perl5.10.0/lib/5.10.0/ExtUtils/xsubpp -typemap /home/cwill1is/perl5.10.0/lib/5.10.0/ExtUtils/typemap LatLong.xs > LatLong.xsc && mv LatLong.xsc LatLong.c Please specify prototyping behavior for LatLong.xs (see perlxs manual) gcc -c -I. -DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -fno-strict-aliasing -pipe -I/usr/local/include -DUSEIMPORTLIB -O2 -DVERSION=\"0.8009\" -DXS_VERSION=\"0.8009\" "-I/home/cwill1is/perl5.10.0/lib/5.10.0/cygwin-thread-multi-64int/CORE" LatLong.c In file included from LatLong.xs:5: ppport.h:231:1: warning: "PERL_UNUSED_DECL" redefined In file included from LatLong.xs:2: /home/cwill1is/perl5.10.0/lib/5.10.0/cygwin-thread-multi-64int/CORE/perl.h:299:1: warning: this is the location of the previous definition Running Mkbootstrap for Geo::Query::LatLong () chmod 644 LatLong.bs rm -f blib/arch/auto/Geo/Query/LatLong/LatLong.dll g++ --shared -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--stack,8388608 -Wl,--enable-auto-image-base -Wl,--enable-auto-import -L/usr/local/lib LatLong.o -o blib/arch/auto/Geo/Query/LatLong/LatLong.dll \ /home/cwill1is/perl5.10.0/lib/5.10.0/cygwin-thread-multi-64int/CORE/libperl.dll.a \ chmod 755 blib/arch/auto/Geo/Query/LatLong/LatLong.dll cp LatLong.bs blib/arch/auto/Geo/Query/LatLong/LatLong.bs chmod 644 blib/arch/auto/Geo/Query/LatLong/LatLong.bs [ERROR] [Mon Feb 11 15:18:45 2008] MAKE TEST failed: Illegal seek /home/cwill1is/perl5.10.0/bin/perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Geo-Query-LatLong...... Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests Test Summary Report ------------------- t/Geo-Query-LatLong.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 Files=1, Tests=1, 1 wallclock secs ( 0.05 usr 0.00 sys + 0.14 cusr 0.12 csys = 0.31 CPU) Result: FAIL # Failed test 'use Geo::Query::LatLong;' # at t/Geo-Query-LatLong.t line 9. # Tried to use 'Geo::Query::LatLong'. # Error: Can't locate LWP/UserAgent.pm in @INC (@INC contains: /home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/Geo-Query-LatLong-0.8009/blib/lib /home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/Geo-Query-LatLong-0.8009/blib/arch /home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/Geo-Query-LatLong-0.8009/blib /home/cwill1is/perl5.10.0/lib/5.10.0/cygwin-thread-multi-64int /home/cwill1is/perl5.10.0/lib/5.10.0 /home/cwill1is/perl5.10.0/lib/site_perl/5.10.0/cygwin-thread-multi-64int /home/cwill1is/perl5.10.0/lib/site_perl/5.10.0 .) at /home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/Geo-Query-LatLong-0.8009/blib/lib/Geo/Query/LatLong.pm line 16. # BEGIN failed--compilation aborted at t/Geo-Query-LatLong.t line 9. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. # Looks like you failed 1 test of 1. Failed 1/1 test programs. 1/1 subtests failed. make: *** [test_dynamic] Error 1 [MSG] [Mon Feb 11 15:18:45 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: LWP::UserAgent As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'RETOH ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'LWP::UserAgent' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 COMSPEC = C:\WINDOWS\system32\cmd.exe INCLUDE = C:\strawberry\c\include;C:\strawberry\perl\lib\CORE LIB = C:\strawberry\c\lib;C:\strawberry\perl\bin NUMBER_OF_PROCESSORS = 1 PATH = /usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/cygdrive/c/GNUWin32/bin:/cygdrive/c/Program Files/Subversion/bin:/cygdrive/c/strawberry/c/bin:/cygdrive/c/strawberry/perl/bin:/cygdrive/c/WINDOWS/system32/WindowsPowerShell/v1.0:/cygdrive/c/Program Files/Support Tools/:/cygdrive/c/Mingw/dmake:/cygdrive/c/Mingw/bin:/cygdrive/c/Mingw/tools:/cygdrive/c/Perl/bin/:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wbem:/cygdrive/c/Program Files/Microsoft SQL Server/80/Tools/BINN://scc030/helpdeskv6$/HelpDesk/HDBIN32/:/cygdrive/c/Program Files/Vim/vim63:/cygdrive/c/Program Files/QuickTime/QTSystem/:/cygdrive/c/Program Files/SSH Communications Security/SSH Secure Shell:/cygdrive/c/Program Files/Nmap PERL5LIB = :/home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/Geo-Query-LatLong-0.8009/blib/lib:/home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/Geo-Query-LatLong-0.8009/blib/arch:/home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/Geo-Query-LatLong-0.8009/blib PERL5_CPANPLUS_IS_RUNNING = 10760 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 PROCESSOR_IDENTIFIER = x86 Family 15 Model 1 Stepping 2, GenuineIntel SHELL = /bin/sh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cwill1is/perl5.10.0/bin/perl.exe UID: $< = 11964 EUID: $> = 11964 GID: $( = 10513 544 545 1003 1026 10512 10513 35917 10519 12222 51275 47366 11814 11812 11265 14694 13857 44594 44599 19834 18930 49232 47137 46503 EGID: $) = 10513 544 545 1003 1026 10512 10513 35917 10519 12222 51275 47366 11814 11812 11265 14694 13857 44594 44599 19834 18930 49232 47137 46503 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=cygwin, osvers=1.5.24(0.15642), archname=cygwin-thread-multi-64int uname='cygwin_nt-5.2 citu003 1.5.24(0.15642) 2007-01-31 10:57 i686 cygwin ' config_args='-e -Dprefix=/home/cwill1is/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc=n' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -fno-strict-aliasing -pipe -I/usr/local/include', optimize='-O2', cppflags='-DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.4.4 (cygming special, gdc 0.12, using dmd 0.125)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='g++', ldflags =' -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--stack,8388608 -Wl,--enable-auto-image-base -Wl,--enable-auto-import -L/usr/local/lib' libpth=/usr/local/lib /usr/lib /lib libs=-lgdbm -ldb -ldl -lcrypt -lgdbm_compat perllibs=-ldl -lcrypt -lgdbm_compat libc=/usr/lib/libc.a, so=dll, useshrplib=true, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' -s' cccdlflags=' ', lddlflags=' --shared -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--stack,8388608 -Wl,--enable-auto-image-base -Wl,--enable-auto-import -L/usr/local/lib'
