I am unable to get ahold of Julio. Upon review of the github for crowbar it can be installed on a virtual system however it requires a NIC for each subnet that it has to access.
https://github.com/crowbar/crowbar/wiki/Running-Crowbar-in-VirtualBox-VMs The only way you could do this would be to add extra NICs as Crowbar seems to access each network to provide the deployment option. There would not be a suitable way to do this using a system with only 2 NICs that I have read. I know very little about the requirements for the crowbar system and the network that it must interact with. The link above may provide more information for you. From: Imran Mirza [mailto:[email protected]] Sent: Friday, June 28, 2013 5:03 PM To: Terpstra, John; Hardy, Chris Cc: crowbar; Hirschfeld, Rob Subject: RE: Crowbar That's my problem, im trying to figure our how to connect them and use traffic for deployment. Chris Hardy helped us yesterday in setting up (3) Force10 S60s with a NSA250M as the gateway (all5 ports used up) as: - (1) S60 for Hadoop with 1 port going into the NSA250M - (1) S60 for Openstack with 1 port going into the NSA250M - (1) S60 for General Purpose with 1 port going into the NSA250M I'm not sure how to use the R420 (32GB Ram, 2xCPU 2 eth ports) besides adding an additional eth port. The Crowbar VMs will be - (1) for Hadoop, - (1) for Opensatck and - (1) Custom Crowbar build for deploying GPU compute, Microsoft Hyper-V, and VMware vSphere Farms From: [email protected]<mailto:[email protected]> [mailto:[email protected]] Sent: Friday, June 28, 2013 2:51 PM To: Imran Mirza; [email protected]<mailto:[email protected]> Cc: [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]> Subject: RE: Crowbar Imran, Please can you explain what you are trying to achieve? It is possible to run multiple VM nodes on an R420. Suggest you send a diagram showing how you propose to connect two Ethernet ports over three switches. - John T. [cid:[email protected]] John H Terpstra Cloud Services Architect, Senior Principal Engineer Enterprise Solution Group +1 512 900-1654 | [email protected]<mailto:[email protected]> [cid:[email protected]] From: Imran Mirza [mailto:[email protected]] Sent: Friday, June 28, 2013 4:29 PM To: Hardy, Chris Cc: crowbar; Terpstra, John; Hirschfeld, Rob Subject: Crowbar Can you as Julio if we can run 3 Crowbar VMs concurrently (one for Openstack, one for Hadoop, and one for general purpose) on a R420 with only two Ethernet ports? Not sure how that will tie into three S60 switches that are independent from each other and on separate subnets. Thanks
<<inline: image001.jpg>>
<<inline: image002.png>>
_______________________________________________ Crowbar mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/crowbar For more information: http://crowbar.github.com/
