Thanks. The inventory.csv is available on our system. It does list our nodes (4 ceph, 2 nova, 1 controller, 1 admin) but doesn't list anything that would appear to be a distinct IP for the BMCs. Is this the expected config, ie. should I expect to be able to talk to the ipmi on that same interface?
As far as I know, the BMC is a separate physical interface on a separate switch even and wouldn't be capable of being shared. Is there some additional config I can look through to confirm this? ~jpr On 12/18/2013 05:26 PM, Tom Rawls wrote: > > Classification: //Dell SecureWorks/Confidential - Limited External > Distribution: > > Depending on the crowbar version, you can pull down a CSV from the > Inventory page (under the Nodes menu in crowbar). Then you can easily > pull that column of data from the CSV and remove the admin node's IP > from the list. > > > > *From:*[email protected] [mailto:[email protected]] *On > Behalf Of *[email protected] > *Sent:* Wednesday, December 18, 2013 5:57 PM > *To:* [email protected]; [email protected] > *Subject:* Re: [Crowbar] record of IP's assigned to bmc_vlan > > > > John-Paul, > > I'm going from memory -- someone else may have a more specific answer... > > This data should be provided in the Crowbar UI for the Node. I think > there's a list of all the assigned IPs with their associated network. > > If you want the raw data, there are two places to look for this > information in the Chef database: both are Chef Roles. Check the > "wall" in the crowbar-node-Name role's metadata and also the > "bc-network-default" or similar where Crowbar maintain's network > information. > > Hopefully someone else can give you a more precise answer. > > Rob > > -----Original Message----- > From: crowbar-bounces On Behalf Of John-Paul Robinson > Sent: Wednesday, December 18, 2013 2:52 PM > To: crowbar > Subject: [Crowbar] record of IP's assigned to bmc_vlan > > Hi, > > Where does crowbar record the IP addresses assigned to devices in the > bmc_vlan? > > Specifically, I want to use ipmi from the admin node to interface with > the idrac cards and can't find which IP's were assigned to these > interfaces. > > I'm assuming this is handled by crowbar. > > Thanks, > > ~jpr > > _______________________________________________ > Crowbar mailing list > [email protected] <mailto:[email protected]> > https://lists.us.dell.com/mailman/listinfo/crowbar > For more information: http://crowbar.github.com/ > <http://crowbar.github.com/> >
_______________________________________________ Crowbar mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/crowbar For more information: http://crowbar.github.com/
