That sounds great Guido. I'm using an external usb hdd for this pourpose (pkgmk work dir and a swap file).
Lot of patience with this big build. I hope it'll finish right soon. Regards, Victor. Victor Martinez Learning bit by bit | http://vjml.es El 06/06/2016 12:54, Guido Caliandro <[email protected]> escribió: > > Hi Victor, > Thanks for your suggestion, I'm sure you found one of my problems, because I > had no swap at all on my system, and now the build process works longer than > before. > I'm having another problem now: After many hours of work, it freeze.... > I'm considering the fact that my sdcard could be too much stressed, so at > this moment I booted from root=/dev/sda1 (an external usb HDD) and it's > working at the moment... > I'm waiting for the build to complete and I let you know... > > Thanks again > > Regards, > > Guido > > > 2016-06-04 15:04 GMT+02:00 Víctor Martínez <[email protected]>: >> >> Hey Guido, >> to build firefox (I haven't tested midori but if it needs qt you'll hit the >> same problem while building that beast) you need a big amount of swap. I've >> built firefox and chromium on the cubieboard2 without problems but I'm using >> 14GB of swap file. Probably only ~8-9GB are needed. >> >> If you can give a try and report it'd be great. >> >> Regards, >> >> Victor Martinez >> Learning bit by bit | http://vjml.es >> >> El 04/06/2016 11:31, Guido Caliandro <[email protected]> escribió: >> > >> > Hi all, >> > I'm trying to compile a web browser on my RPI2 on crux-arm 3.2, but every >> > time I try (Firefox or Midori), the build fails killing cc1plus because of >> > a low memory issue. >> > I freed the GPU ram to leave all available memory to the build process, >> > but I had same result. >> > >> > I also tried to cross compile them using pkgutils-cross and toolchain but >> > no success >> > >> > I'm considering qemu and a virtual system... what do you think about that? >> > Is there any guide to this kind of processes? >> > >> > Thank you for your help >> > >> > Best regards >> > >> > Guido > > _______________________________________________ crux-arm mailing list [email protected] https://crux-arm.nu/mailman/listinfo/crux-arm
