On Sep 14, 3:37pm, [email protected] (Paul Goyette) wrote: -- Subject: Re: Wedges enabled on -current
| On Mon, 18 Aug 2014, Christos Zoulas wrote: | | > Hi, | > | > Now that we have branched 7, I am planning to enable full wedge support | > ... | | Just out of curiousity, how does this affect raidframe? And auto-detect | of existing raid sets? (And more especially, booting from the raidset!) | | My main server machine uses this. I'm not in a position to test it | right now (since the machine is still in a container in Manila, waiting | for delivery to house), but it would be interesting to know what I might | expect once I start unpacking and getting my farm re-established. It works... christos wd0 at atabus0 drive 0 wd0: <ST31000340NS> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors dk0 at wd0: wd0a dk0: 488397105 blocks at 63, type: raidframe wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) cd0(piixide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) wd1 at atabus1 drive 0 wd1: <ST31000340NS> wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors dk1 at wd1: wd1a dk1: 488397105 blocks at 63, type: raidframe wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd1(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) Kernelized RAIDframe activated Component on: dk0: 488397105 Row: 0 Column: 1 Num Rows: 1 Num Columns: 2 Version: 2 Serial Number: 2006040301 Mod Counter: 19126 Clean: No Status: 0 sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1 RAID Level: 1 blocksize: 512 numBlocks: 488396928 Autoconfig: Yes Root partition: Soft Last configured as: raid1 Component on: dk1: 488397105 Row: 0 Column: 0 Num Rows: 1 Num Columns: 2 Version: 2 Serial Number: 2006040301 Mod Counter: 19126 Clean: No Status: 0 sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1 RAID Level: 1 blocksize: 512 numBlocks: 488396928 Autoconfig: Yes Root partition: Soft Last configured as: raid1 Found: dk1 at 0 Found: dk0 at 1 RAID autoconfigure Configuring raid1: Starting autoconfiguration of RAID set... Looking for 0 in autoconfig Found: dk1 at 0 Looking for 1 in autoconfig Found: dk0 at 1 raid1: allocating 20 buffers of 65536 bytes. raid1: RAID Level 1 raid1: Components: /dev/dk1 /dev/dk0 raid1: Total Sectors: 488396928 (238475 MB) dk2 at raid1: raid1a dk2: 819200 blocks at 0, type: ffs dk3 at raid1: raid1b dk3: 8388608 blocks at 819200, type: swap dk4 at raid1: raid1e dk4: 4194304 blocks at 9207808, type: ffs dk5 at raid1: raid1f dk5: 33554432 blocks at 13402112, type: ffs dk6 at raid1: raid1g dk6: 33554432 blocks at 46956544, type: ffs dk7 at raid1: raid1h dk7: 268435456 blocks at 80510976, type: ffs dk8 at raid1: raid1i dk8: 139450496 blocks at 348946432, type: ffs boot device: dk2 root on dk2 dumps on dk3
