Hi, Thank you for the test. Unfortunately, things haven't changed better. The new panic looks same kind of panic as the previous one and I have no idea to fix it quickly (we need a PR for the issue). The panic (assertion failure) always occurs when LOCKDEBUG is enabled so please build and try again without the option. Then, we can get a log of the panic that you encountered in the first place.
Regards, ozaki-r On Mon, Oct 13, 2014 at 6:31 PM, <[email protected]> wrote: > Hello, > > I have build a kernel with debug to make a better problem report. > The fix is applied to ixgbe.h > > dmesg -M netbsd.8.core -N netbsd.8: > > Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, > 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 > The NetBSD Foundation, Inc. All rights reserved. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > > NetBSD 7.0_BETA (MYCONF7.gdb) #1: Sun Oct 12 19:22:12 CEST 2014 > > [email protected]:/usr/obj/sys/arch/amd64/compile/MYCONF7.gdb > > total memory = 32765 MB > avail memory = 31798 MB > kern.module.path=/stand/amd64/7.0/modules > timecounter: Timecounters tick every 10.000 msec > timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 > HP ProLiant DL380 G5 > mainbus0 (root) > ACPI: RSDP 0xf4f00 000024 (v02 HP ) > ACPI: XSDT 0xcfe447c0 00007C (v01 HP ProLiant 00000002 ?? 0000162E) > ACPI: FACP 0xcfe44840 0000F4 (v03 HP ProLiant 00000002 ?? 0000162E) > ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using > default 16 (20131218/tbfadt-716) > ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using > default 8 (20131218/tbfadt-716) > ACPI: DSDT 0xcfe44940 0023E8 (v01 HP DSDT 00000001 INTL 20030228) > ACPI: FACS 0xcfe44100 000040 > ACPI: SPCR 0xcfe44140 000050 (v01 HP SPCRRBSU 00000001 ?? 0000162E) > ACPI: MCFG 0xcfe441c0 00003C (v01 HP ProLiant 00000001 00000000) > ACPI: HPET 0xcfe44200 000038 (v01 HP ProLiant 00000002 ?? 0000162E) > ACPI: SPMI 0xcfe44240 000040 (v05 HP ProLiant 00000001 ?? 0000162E) > ACPI: ERST 0xcfe44280 0001D0 (v01 HP ProLiant 00000001 ?? 0000162E) > ACPI: APIC 0xcfe44480 00009E (v01 HP ProLiant 00000002 00000000) > ACPI: FFFF 0xcfe44540 000176 (v01 HP ProLiant 00000001 ?? 0000162E) > ACPI: BERT 0xcfe446c0 000030 (v01 HP ProLiant 00000001 ?? 0000162E) > ACPI: HEST 0xcfe44700 0000BC (v01 HP ProLiant 00000001 ?? 0000162E) > ACPI: SSDT 0xcfe49000 000C85 (v01 HP SSDTP 00000001 INTL 20061109) > ACPI: All ACPI Tables successfully acquired > cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz, id > 0x1067a > cpu1 at mainbus0 apid 4: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz, id > 0x1067a > cpu2 at mainbus0 apid 2: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz, id > 0x1067a > cpu3 at mainbus0 apid 6: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz, id > 0x1067a > cpu4 at mainbus0 apid 1: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz, id > 0x1067a > cpu5 at mainbus0 apid 5: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz, id > 0x1067a > cpu6 at mainbus0 apid 3: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz, id > 0x1067a > cpu7 at mainbus0 apid 7: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz, id > 0x1067a > ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins > acpi0 at mainbus0: Intel ACPICA 20131218 > acpi0: X/RSDT: OemId <HP ,ProLiant,00000002>, AslId < M-R^D,0000162e> > ACPI Warning: \_SB_.PCI0.PT02._PRT: Return Package has no elements (empty) > (20131218/nsprepkg-138) > ACPI: SSDT 0xcfe4f800 0000AD (v01 HP CPU0CST 00000001 INTL 20061109) > ACPI: SSDT 0x0 0000AD (v01 HP CPU0CST 00000001 INTL 20061109) > ACPI: SSDT 0xcfe4f900 0000AD (v01 HP CPU1CST 00000001 INTL 20061109) > ACPI: SSDT 0x0 0000AD (v01 HP CPU1CST 00000001 INTL 20061109) > ACPI: SSDT 0xcfe4fa00 0000AD (v01 HP CPU2CST 00000001 INTL 20061109) > ACPI: SSDT 0x0 0000AD (v01 HP CPU2CST 00000001 INTL 20061109) > ACPI: SSDT 0xcfe4fb00 0000AD (v01 HP CPU3CST 00000001 INTL 20061109) > ACPI: SSDT 0x0 0000AD (v01 HP CPU3CST 00000001 INTL 20061109) > ACPI: SSDT 0xcfe4fc00 0000AD (v01 HP CPU4CST 00000001 INTL 20061109) > ACPI: SSDT 0x0 0000AD (v01 HP CPU4CST 00000001 INTL 20061109) > ACPI: SSDT 0xcfe4fd00 0000AD (v01 HP CPU5CST 00000001 INTL 20061109) > ACPI: SSDT 0x0 0000AD (v01 HP CPU5CST 00000001 INTL 20061109) > ACPI: SSDT 0xcfe4fe00 0000AD (v01 HP CPU6CST 00000001 INTL 20061109) > ACPI: SSDT 0x0 0000AD (v01 HP CPU6CST 00000001 INTL 20061109) > ACPI: SSDT 0xcfe4ff00 0000AD (v01 HP CPU7CST 00000001 INTL 20061109) > ACPI: SSDT 0x0 0000AD (v01 HP CPU7CST 00000001 INTL 20061109) > acpi0: SCI interrupting at int 9 > timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 > hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) > timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 > MOMB (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose', > error 45 > at acpi0 not configured > MI0 (IPI0001) WARNING: module error: vfs load failed for `acpiverbose', > error 45 > at acpi0 not configured > attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0 > pcppi1 at acpi0 (BEEP, PNP0800): io 0x61 > midi0 at pcppi1: PC speaker > sysbeep0 at pcppi1 > pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 > pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 > COMA (PNP0501) WARNING: module error: vfs load failed for `acpiverbose', > error 45 > at acpi0 not configured > acpitz0 at acpi0 (THM0): cpu0 > acpitz0: levels: critical 31.3 C, passive 9.8 C, passive cooling > ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] > (20131218/hwxface-646) > ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] > (20131218/hwxface-646) > ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] > (20131218/hwxface-646) > WARNING: module error: vfs load failed for `acpiverbose', error 45 > attimer1: attached to pcppi1 > pckbd0 at pckbc1 (kbd slot) > pckbc1: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard > pms0 at pckbc1 (aux slot) > pckbc1: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > ipmi0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok > pchb0 at pci0 dev 0 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25d8 (rev. 0xb1) > ppb0 at pci0 dev 2 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25e2 (rev. 0xb1) > ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex> x4 @ 2.5Gb/s > pci1 at ppb0 bus 9 > pci1: i/o space, memory space enabled, rd/line, wr/inv ok > ppb1 at pci1 dev 0 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x3500 (rev. 0x01) > ppb1: PCI Express 1.0 <Upstream Port of PCI-E Switch> > pci2 at ppb1 bus 10 > pci2: i/o space, memory space enabled, rd/line, wr/inv ok > ppb2 at pci2 dev 0 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x3510 (rev. 0x01) > ppb2: PCI Express 1.0 <Downstream Port of PCI-E Switch> x4 @ 2.5Gb/s > pci3 at ppb2 bus 11 > pci3: i/o space, memory space enabled, rd/line, wr/inv ok > ppb3 at pci2 dev 1 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x3514 (rev. 0x01) > ppb3: PCI Express 1.0 <Downstream Port of PCI-E Switch> x4 @ 2.5Gb/s > pci4 at ppb3 bus 14 > pci4: i/o space, memory space enabled, rd/line, wr/inv ok > ppb4 at pci4 dev 0 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x1166 product 0x0103 (rev. 0xb4) > ppb4: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge> > pci5 at ppb4 bus 15 > pci5: i/o space, memory space enabled, rd/line, wr/inv ok > ppb5 at pci5 dev 4 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x1166 product 0x0104 (rev. 0xb2) > pci6 at ppb5 bus 16 > pci6: i/o space, memory space enabled, rd/line, wr/inv ok > ciss0 at pci5 dev 8 function 0: Smart Array E200 > ciss0: interrupting at ioapic0 pin 17 > ciss0: 1 LD, HW rev 0, FW 1.86/1.86 > scsibus0 at ciss0: 1 target, 1 lun per target > ppb6 at pci2 dev 2 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x3518 (rev. 0x01) > ppb6: PCI Express 1.0 <Downstream Port of PCI-E Switch> x4 @ 2.5Gb/s > pci7 at ppb6 bus 17 > pci7: i/o space, memory space enabled, rd/line, wr/inv ok > ppb7 at pci1 dev 0 function 3WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x350c (rev. 0x01) > ppb7: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge> > pci8 at ppb7 bus 18 > pci8: i/o space, memory space enabled, rd/line, wr/inv ok > ppb8 at pci0 dev 3 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25e3 (rev. 0xb1) > ppb8: PCI Express 1.0 <Root Port of PCI-E Root Complex> x4 @ 2.5Gb/s > pci9 at ppb8 bus 6 > pci9: i/o space, memory space enabled, rd/line, wr/inv ok > ppb9 at pci0 dev 4 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25f8 (rev. 0xb1) > ppb9: PCI Express 1.0 <Root Port of PCI-E Root Complex> x8 @ 2.5Gb/s > pci10 at ppb9 bus 19 > pci10: i/o space, memory space enabled, rd/line, wr/inv ok > ppb10 at pci0 dev 5 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25e5 (rev. 0xb1) > ppb10: PCI Express 1.0 <Root Port of PCI-E Root Complex> x4 @ 2.5Gb/s > pci11 at ppb10 bus 22 > pci11: i/o space, memory space enabled, rd/line, wr/inv ok > ppb11 at pci0 dev 6 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25f9 (rev. 0xb1) > ppb11: PCI Express 1.0 <Root Port of PCI-E Root Complex> x8 @ 2.5Gb/s > pci12 at ppb11 bus 23 > pci12: i/o space, memory space enabled, rd/line, wr/inv ok > ixg0 at pci12 dev 0 function 0: Intel(R) PRO/10GbE PCI-Express Network > Driver, Version - 2.3.10 > ixg0: interrupting at ioapic0 pin 19 > ixg0: PCI Express Bus: Speed 2.5Gb/s Width x8 > ixg1 at pci12 dev 0 function 1: Intel(R) PRO/10GbE PCI-Express Network > Driver, Version - 2.3.10 > ixg1: interrupting at ioapic0 pin 16 > ifmedia_match: multiple match for 0x20/0xfffffff, selected instance 0 > ixg1: PCI Express Bus: Speed 2.5Gb/s Width x8 > ppb12 at pci0 dev 7 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25e7 (rev. 0xb1) > ppb12: PCI Express 1.0 <Root Port of PCI-E Root Complex> x4 @ 2.5Gb/s > pci13 at ppb12 bus 26 > pci13: i/o space, memory space enabled, rd/line, wr/inv ok > pchb1 at pci0 dev 16 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25f0 (rev. 0xb1) > pchb2 at pci0 dev 16 function 1WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25f0 (rev. 0xb1) > pchb3 at pci0 dev 16 function 2WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25f0 (rev. 0xb1) > pchb4 at pci0 dev 17 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25f1 (rev. 0xb1) > pchb5 at pci0 dev 19 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25f3 (rev. 0xb1) > pchb6 at pci0 dev 21 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25f5 (rev. 0xb1) > pchb7 at pci0 dev 22 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x25f6 (rev. 0xb1) > ppb13 at pci0 dev 28 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x2690 (rev. 0x09) > ppb13: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s > pci14 at ppb13 bus 2 > pci14: i/o space, memory space enabled, rd/line, wr/inv ok > ppb14 at pci14 dev 0 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x1166 product 0x0103 (rev. 0xc3) > ppb14: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge> > pci15 at ppb14 bus 3 > pci15: i/o space, memory space enabled, rd/line, wr/inv ok > bnx0 at pci15 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T > bnx0: Ethernet address 00:22:64:fc:df:8e > bnx0: interrupting at ioapic0 pin 16 > bnx0: ASIC BCM5708 B2 (0x57081020) > bnx0: PCI-X 64bit 133MHz > bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80) > brgphy0 at bnx0 phy 1: BCM5708C 1000BASE-T media interface, rev. 6 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > ppb15 at pci0 dev 28 function 1WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x2692 (rev. 0x09) > ppb15: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s > pci16 at ppb15 bus 4 > pci16: i/o space, memory space enabled, rd/line, wr/inv ok > ppb16 at pci16 dev 0 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x1166 product 0x0103 (rev. 0xc3) > ppb16: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge> > pci17 at ppb16 bus 5 > pci17: i/o space, memory space enabled, rd/line, wr/inv ok > bnx1 at pci17 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T > bnx1: Ethernet address 00:22:64:fc:df:8c > bnx1: interrupting at ioapic0 pin 17 > bnx1: ASIC BCM5708 B2 (0x57081020) > bnx1: PCI-X 64bit 133MHz > bnx1: Coal (RX:6,6,18,18; TX:20,20,80,80) > brgphy1 at bnx1 phy 1: BCM5708C 1000BASE-T media interface, rev. 6 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > uhci0 at pci0 dev 29 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x2688 (rev. 0x09) > uhci0: interrupting at ioapic0 pin 16 > WARNING: module error: vfs load failed for `pciverbose', error 45 > usb0 at uhci0: USB revision 1.0 > uhci1 at pci0 dev 29 function 1WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x2689 (rev. 0x09) > uhci1: interrupting at ioapic0 pin 17 > WARNING: module error: vfs load failed for `pciverbose', error 45 > usb1 at uhci1: USB revision 1.0 > uhci2 at pci0 dev 29 function 2WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x268a (rev. 0x09) > uhci2: interrupting at ioapic0 pin 18 > WARNING: module error: vfs load failed for `pciverbose', error 45 > usb2 at uhci2: USB revision 1.0 > uhci3 at pci0 dev 29 function 3WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x268b (rev. 0x09) > uhci3: interrupting at ioapic0 pin 19 > WARNING: module error: vfs load failed for `pciverbose', error 45 > usb3 at uhci3: USB revision 1.0 > ehci0 at pci0 dev 29 function 7WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x268c (rev. 0x09) > ehci0: interrupting at ioapic0 pin 16 > WARNING: module error: vfs load failed for `pciverbose', error 45 > ehci0: BIOS has given up ownership > ehci0: EHCI version 1.0 > ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 > usb4 at ehci0: USB revision 2.0 > ppb17 at pci0 dev 30 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x8086 product 0x244e (rev. 0xd9) > pci18 at ppb17 bus 1 > pci18: i/o space, memory space enabled > vga0 at pci18 dev 3 function 0WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x1002 product 0x515e (rev. 0x02) > wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 > wsmux1: connecting to wsdisplay0 > radeondrm0 at vga0: ATI ES1000 RN50 > radeondrm0: Initialized radeon 1.29.0 20080613 > WARNING: module error: vfs load failed for `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > vendor 0x0e11 product 0xb203 (miscellaneous system, revision 0x03) at pci18 > dev 4 function 0 not configured > WARNING: module error: vfs load failed for `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > vendor 0x0e11 product 0xb204 (miscellaneous system, revision 0x03) at pci18 > dev 4 function 2 not configured > uhci4 at pci18 dev 4 function 4WARNING: module error: vfs load failed for > `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > : vendor 0x103c product 0x3300 (rev. 0x00) > uhci4: interrupting at ioapic0 pin 22 > WARNING: module error: vfs load failed for `pciverbose', error 45 > usb5 at uhci4: USB revision 1.0 > WARNING: module error: vfs load failed for `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > vendor 0x103c product 0x3302 (IPMI serial bus, keyboard) at pci18 dev 4 > function 6 not configured > ichlpcib0 at pci0 dev 31 function 0WARNING: module error: vfs load failed > for `pciverbose', error 45 > WARNING: module error: vfs load failed for `pciverbose', error 45 > > : vendor 0x8086 product 0x2670 (rev. 0x09) > timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 > ichlpcib0: 24-bit timer > ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly > handles it. > ichlpcib0: TCO (watchdog) timer configured. > piixide0 at pci0 dev 31 function 1: Intel 631xESB/632xESB IDE Controller > (rev. 0x09) > piixide0: bus-master DMA support present > piixide0: primary channel configured to compatibility mode > piixide0: primary channel interrupting at ioapic0 pin 14 > atabus0 at piixide0 channel 0 > piixide0: secondary channel configured to compatibility mode > piixide0: secondary channel interrupting at ioapic0 pin 15 > atabus1 at piixide0 channel 1 > isa0 at ichlpcib0 > com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo > com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo > acpicpu0 at cpu0: ACPI CPU > acpicpu0: C1: FFH, lat 1 us, pow 1000 mW > acpicpu0: C3: I/O, lat 17 us, pow 250 mW > coretemp0 at cpu0: thermal sensor, 1 C resolution > acpicpu1 at cpu1: ACPI CPU > coretemp1 at cpu1: thermal sensor, 1 C resolution > acpicpu2 at cpu2: ACPI CPU > coretemp2 at cpu2: thermal sensor, 1 C resolution > acpicpu3 at cpu3: ACPI CPU > coretemp3 at cpu3: thermal sensor, 1 C resolution > acpicpu4 at cpu4: ACPI CPU > coretemp4 at cpu4: thermal sensor, 1 C resolution > acpicpu5 at cpu5: ACPI CPU > coretemp5 at cpu5: thermal sensor, 1 C resolution > acpicpu6 at cpu6: ACPI CPU > coretemp6 at cpu6: thermal sensor, 1 C resolution > acpicpu7 at cpu7: ACPI CPU > coretemp7 at cpu7: thermal sensor, 1 C resolution > timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 > scsibus0: waiting 2 seconds for devices to settle... > IPsec: Initialized Security Association Processing. > uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > uhub4 at usb5: vendor 0x103c UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub4: 2 ports with 2 removable, self powered > uhub5 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub5: 8 ports with 8 removable, self powered > atapibus0 at atabus0: 2 targets > cd0 at atapibus0 drive 0: <TEAC DV-W28E-RW, , G.B2> cdrom removable > cd0: 32-bit data port > cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) > cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA) > sd0 at scsibus0 target 0 lun 0: <HP, LOGICAL VOLUME, 1.86> disk fixed > sd0: 279 GB, 65535 cyl, 255 head, 35 sec, 512 bytes/sect x 585871964 sectors > sd0: async, 8-bit transfers, tagged queueing > umass0 at uhub5 port 4 configuration 1 interface 0 > umass0: HP v100w, rev 2.00/1.00, addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, 1 lun per target > sd1 at scsibus1 target 0 lun 0: <HP, v100w, PMAP> disk removable > sd1: 1937 MB, 7748 cyl, 16 head, 32 sec, 512 bytes/sect x 3966976 sectors > uhidev0 at uhub4 port 1 configuration 1 interface 0 > uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub4 port 1 configuration 1 interface 1 > uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 > ums0 at uhidev1: 3 buttons > wsmouse1 at ums0 mux 0 > Kernelized RAIDframe activated > pad0: outputs: 44100Hz, 16-bit, stereo > audio0 at pad0: half duplex, playback, capture > boot device: sd0 > root on sd0a dumps on sd0b > dump_misc_init: max_paddr = 0x82ffff000 > mountroot: trying smbfs... > mountroot: trying ntfs... > mountroot: trying nfs... > mountroot: trying msdos... > mountroot: trying lfs... > mountroot: trying ext2fs... > mountroot: trying ffs... > root file system type: ffs > init: copying out path `/sbin/init' 11 > ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 > ciss0: normal state on 'ciss0:0' (online) > panic: LOCKDEBUG: Mutex error: lockdebug_barrier: spin lock held > cpu7: Begin traceback... > vpanic() at netbsd:vpanic+0x13c > snprintf() at netbsd:snprintf > lockdebug_more() at netbsd:lockdebug_more > assert_sleepable() at netbsd:assert_sleepable+0x25 > pool_cache_get_paddr() at netbsd:pool_cache_get_paddr+0x168 > kmem_intr_alloc() at netbsd:kmem_intr_alloc+0x6f > kmem_intr_zalloc() at netbsd:kmem_intr_zalloc+0xf > ixgbe_jcl_reinit() at netbsd:ixgbe_jcl_reinit+0x124 > ixgbe_init_locked() at netbsd:ixgbe_init_locked+0x510 > ixgbe_init() at netbsd:ixgbe_init+0x22 > ether_ioctl() at netbsd:ether_ioctl+0xca > ixgbe_ioctl() at netbsd:ixgbe_ioctl+0x41 > in_ifinit() at netbsd:in_ifinit+0x136 > in_control.part.1() at netbsd:in_control.part.1+0x74d > udp_ioctl_wrapper() at netbsd:udp_ioctl_wrapper+0x32 > compat_ifioctl() at netbsd:compat_ifioctl+0x116 > doifioctl() at netbsd:doifioctl+0x43a > soo_ioctl() at netbsd:soo_ioctl+0x2af > sys_ioctl() at netbsd:sys_ioctl+0x17e > syscall() at netbsd:syscall+0x9a > --- syscall (number 54) --- > 7f7ff6cd0a0a: > cpu7: End traceback... > > dumping to dev 4,1 (offset=4589220, size=8388067): > dump uvm_fault(0xfffffe813b53c000, 0x0, 2) -> e > fatal page fault in supervisor mode > trap type 6 code 2 rip ffffffff80560f72 cs 8 rflags 10282 cr2 84 ilevel 8 > rsp fffffe813b662c60 > curlwp 0xfffffe813b9f98e0 pid 315.1 lowest kstack 0xfffffe813b65f2c0 > > > gdb --symbols=/netbsd.gdb --quiet --eval-command="file /netbsd.gdb" > --eval-command="target kvm netbsd.8.core" --eval-command "bt" --eval-command > "list" --eval-command "info all-registers" > Reading symbols from /netbsd.gdb...done. > Load new symbol table from "/netbsd.gdb"? (y or n) Reading symbols from > /netbsd.gdb...done. > 0xffffffff805d735f in cpu_reboot (howto=howto@entry=260, > bootstr=bootstr@entry=0x0) at /usr/src/sys/arch/amd64/amd64/machdep.c:671 > 671 dumpsys(); > #0 0xffffffff805d735f in cpu_reboot (howto=howto@entry=260, > bootstr=bootstr@entry=0x0) at /usr/src/sys/arch/amd64/amd64/machdep.c:671 > #1 0xffffffff807bec94 in vpanic (fmt=fmt@entry=0xffffffff80c5b7d3 > "LOCKDEBUG: %s error: %s: %s", ap=ap@entry=0xfffffe813b6668b8) at > /usr/src/sys/kern/subr_prf.c:340 > #2 0xffffffff807bed4f in panic (fmt=fmt@entry=0xffffffff80c5b7d3 > "LOCKDEBUG: %s error: %s: %s") at /usr/src/sys/kern/subr_prf.c:256 > #3 0xffffffff807b5f61 in lockdebug_abort1 (ld=0xffff80003b4ff320, s=6, > func=0xffffffff80b98540 <__func__.6004> "lockdebug_barrier", > msg=0xffffffff80c5b886 "spin lock held", > dopanic=<optimized out>) at /usr/src/sys/kern/subr_lockdebug.c:783 > #4 0xffffffff8054be4a in assert_sleepable () at > /usr/src/sys/kern/kern_lock.c:69 > #5 0xffffffff807bcb56 in pool_cache_get_paddr (pc=0xfffffe882efdb500, > flags=flags@entry=1, pap=pap@entry=0x0) at > /usr/src/sys/kern/subr_pool.c:2214 > #6 0xffffffff807b3857 in kmem_intr_alloc > (requested_size=requested_size@entry=64, kmflags=1) at > /usr/src/sys/kern/subr_kmem.c:283 > #7 0xffffffff807b3a75 in kmem_intr_zalloc (size=64, kmflags=<optimized > out>) at /usr/src/sys/kern/subr_kmem.c:305 > #8 0xffffffff8053051c in ixgbe_newext (size=2048, dmat=0xffffffff80f43ea0 > <pci_bus_dma_tag>, eh=0xffff80003a46c9f8) at > /usr/src/sys/dev/pci/ixgbe/ixgbe_netbsd.c:139 > #9 ixgbe_jcl_reinit (eh=eh@entry=0xffff80003a46c9f8, > dmat=0xffffffff80f43ea0 <pci_bus_dma_tag>, nbuf=<optimized out>, size=2048) > at /usr/src/sys/dev/pci/ixgbe/ixgbe_netbsd.c:190 > #10 0xffffffff805230ed in ixgbe_setup_receive_ring (rxr=0xfffffe813a8bd050) > at /usr/src/sys/dev/pci/ixgbe/ixgbe.c:3938 > #11 ixgbe_setup_receive_structures (adapter=0xffff80003a469000) at > /usr/src/sys/dev/pci/ixgbe/ixgbe.c:4056 > #12 ixgbe_init_locked (adapter=adapter@entry=0xffff80003a469000) at > /usr/src/sys/dev/pci/ixgbe/ixgbe.c:1224 > #13 0xffffffff805240ee in ixgbe_init (ifp=<optimized out>) at > /usr/src/sys/dev/pci/ixgbe/ixgbe.c:1364 > #14 0xffffffff803c81d6 in ether_ioctl (ifp=0xffff80003a469588, > cmd=<optimized out>, data=0xfffffe8824d68d90) at > /usr/src/sys/net/if_ethersubr.c:1387 > #15 0xffffffff8052413e in ixgbe_ioctl (ifp=0xffff80003a469588, > command=3228592516, data=<optimized out>) at > /usr/src/sys/dev/pci/ixgbe/ixgbe.c:1132 > #16 0xffffffff8048ca94 in in_ifinit (ifp=ifp@entry=0xffff80003a469588, > ia=ia@entry=0xfffffe8824d68d90, sin=sin@entry=0xfffffe813b666e08, > scrub=scrub@entry=0) at /usr/src/sys/netinet/in.c:843 > #17 0xffffffff8048d754 in in_control (so=0xfffffe8824cedb68, cmd=<optimized > out>, data=0xfffffe813b666df8, ifp=0xffff80003a469588) at > /usr/src/sys/netinet/in.c:549 > #18 0xffffffff8048dd57 in in_control (so=so@entry=0xfffffe8824cedb68, > cmd=cmd@entry=2151704858, data=data@entry=0xfffffe813b666df8, > ifp=ifp@entry=0xffff80003a469588) > at /usr/src/sys/netinet/in.c:595 > #19 0xffffffff8083960c in udp_ioctl (ifp=0xffff80003a469588, > nam=0xfffffe813b666df8, cmd=2151704858, so=0xfffffe8824cedb68) at > /usr/src/sys/netinet/udp_usrreq.c:1007 > #20 udp_ioctl_wrapper (a=0xfffffe8824cedb68, b=2151704858, > c=0xfffffe813b666df8, d=0xffff80003a469588) at > /usr/src/sys/netinet/udp_usrreq.c:1397 > #21 0xffffffff80931b7e in compat_ifioctl (so=so@entry=0xfffffe8824cedb68, > ocmd=ocmd@entry=2151704858, cmd=cmd@entry=2151704858, > data=data@entry=0xfffffe813b666df8, l=l@entry=0xfffffe813b9f94c0) > at /usr/src/sys/compat/common/if_43.c:259 > #22 0xffffffff8038751e in doifioctl (so=0xfffffe8824cedb68, cmd=2151704858, > data=<optimized out>, l=0xfffffe813b9f94c0) at /usr/src/sys/net/if.c:1935 > #23 0xffffffff807d8bc6 in soo_ioctl (fp=<optimized out>, cmd=2151704858, > data=0xfffffe813b666df8) at /usr/src/sys/kern/sys_socket.c:202 > #24 0xffffffff807cdbf9 in sys_ioctl (l=<optimized out>, > uap=0xfffffe813b666f00, retval=<optimized out>) at > /usr/src/sys/kern/sys_generic.c:681 > #25 0xffffffff807d8cca in sy_call (rval=0xfffffe813b666eb8, > uap=0xfffffe813b666f00, l=0xfffffe813b9f94c0, sy=0xffffffff80f34e80 > <sysent+864>) at /usr/src/sys/sys/syscallvar.h:61 > #26 sy_invoke (code=54, rval=0xfffffe813b666eb8, uap=0xfffffe813b666f00, > l=0xfffffe813b9f94c0, sy=0xffffffff80f34e80 <sysent+864>) at > /usr/src/sys/sys/syscallvar.h:85 > #27 syscall (frame=0xfffffe813b666f00) at > /usr/src/sys/arch/x86/x86/syscall.c:156 > #28 0xffffffff80100691 in Xsyscall () > 666 /* Disable interrupts. */ > 667 s = splhigh(); > 668 669 /* Do a dump if requested. */ > 670 if ((howto & (RB_DUMP | RB_HALT)) == RB_DUMP) > 671 dumpsys(); > 672 673 haltsys: > 674 doshutdownhooks(); > 675 rax <unavailable> > rbx 0x104 260 > rcx <unavailable> > rdx <unavailable> > rsi <unavailable> > rdi <unavailable> > rbp 0xfffffe813b666880 0xfffffe813b666880 > rsp 0xfffffe813b666870 0xfffffe813b666870 > r8 <unavailable> > r9 <unavailable> > r10 <unavailable> > r11 <unavailable> > r12 0x8 8 > r13 0xfffffe813b6668b8 -1643975907144 > r14 0xffffffff80c5b886 -2134525818 > r15 0x1 1 > rip 0xffffffff805d735f 0xffffffff805d735f <cpu_reboot+457> > eflags <unavailable> > cs <unavailable> > ss <unavailable> > ds <unavailable> > es <unavailable> > fs 0x0 0 > gs 0x0 0 > st0 <unavailable> > st1 <unavailable> > st2 <unavailable> > st3 <unavailable> > st4 <unavailable> > st5 <unavailable> > st6 <unavailable> > st7 <unavailable> > fctrl <unavailable> > fstat <unavailable> > ftag <unavailable> > fiseg <unavailable> > fioff <unavailable> > foseg <unavailable> > fooff <unavailable> > fop <unavailable> > xmm0 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm1 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm2 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm3 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm4 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm5 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm6 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm7 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm8 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm9 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm10 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm11 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm12 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm13 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm14 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > xmm15 {v4_float = {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_double = {<unavailable>, <unavailable>}, v16_int8 = > {<unavailable> <repeats 16 times>}, v8_int16 = { > <unavailable>, <unavailable>, <unavailable>, <unavailable>, > <unavailable>, <unavailable>, <unavailable>, <unavailable>}, v4_int32 = > {<unavailable>, <unavailable>, <unavailable>, > <unavailable>}, v2_int64 = {<unavailable>, <unavailable>}, uint128 = > <unavailable>} > mxcsr <unavailable> > (gdb) > > > > > Thank you for your efforts > > > Regards > Uwe > > > On Sun, 12 Oct 2014, Ryota Ozaki wrote: > >> The logs indicate that: >> - Your kernel is built with LOCKDEBUG enabled >> - ixgbe has a bug and with LOCKDEBUG it fails definitely >> - ixgbe_init holds a spin lock (named CORE) but ixgbe_init can >> sleep/block >> - The bug should exist in both 6.99.45 and netbsd-7-beta >> - The issue is not related to the first your report >> - The first log looks different from the latest logs >> - In the first report, your kernel wasn't built with LOCKDEBUG? >> >> The above bug may be fixed by simply replacing the spin lock with >> an adaptive lock if we are lucky. >> >> #define IXGBE_CORE_LOCK_INIT(_sc, _name) \ >> - mutex_init(&(_sc)->core_mtx, MUTEX_DEFAULT, IPL_NET) >> + mutex_init(&(_sc)->core_mtx, MUTEX_DEFAULT, IPL_NONE) >> >> Can you try the fix? >> >> ozaki-r >> >
