#uname -a NetBSD laptop 7.0 NetBSD 7.0 (MYKERNEL) #0: Wed Nov 4 20:53:55 IST 2015 root@laptop:/usr/src/sys/arch/amd64/compile/MYKERNEL amd64
Nothing relevant changed in MYKERNEL: # diff GENERIC MYKERNEL 891c891 < ulpt* at uhub? port ? configuration ? interface ? --- > #ulpt* at uhub? port ? configuration ? interface ? # disklabel /dev/sd0 # /dev/sd0d: type: unknown disk: FreeAgent Go label: flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 16 sectors/cylinder: 1008 cylinders: 16383 total sectors: 625142447 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # microseconds track-to-track seek: 0 # microseconds drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg/sgs] a: 102395904 103428096 4.2BSD 2048 16384 0 # (Cyl. 102607*- 204190*) c: 102395904 103428096 unused 0 0 # (Cyl. 102607*- 204190*) d: 625142447 0 unused 0 0 # (Cyl. 0 - 620180*) e: 1024000 2048 Linux Ext2 0 0 # (Cyl. 2*- 1017*) g: 102398310 1028160 Linux Ext2 0 0 # (Cyl. 1020 - 102605*) i: 8193087 205824843 swap # (Cyl. 204191*- 212319*) j: 411119352 214017993 Linux Ext2 0 0 # (Cyl. 212319*- 620175*) Portion of /etc/fstab /dev/sd0e /mnt/boot ext2fs noauto,rw 0 0 /dev/sd0g /mnt/pkgsrc ext2fs noauto,rw 0 0 /dev/sd0j /mnt/linuxhome ext2fs noauto,rw 0 0 When on i386 I was able to mount all 3 of the above mounts. However, after switching to amd64 I can mount only /dev/sd0e and /dev/sd0g. Trying to mount /dev/sd0j gives # mount -vvv /mnt/linuxhome/ exec: mount_ext2fs -o noauto /dev/sd0j /mnt/linuxhome mount_ext2fs: /dev/sd0j on /mnt/linuxhome: Device not configured I have done fsck check on all 3 partitions on Linux system and they are all healthy. Not able to mount this partition breaks my system badly. Request help in resolution of this. Mayuresh.