Hi John D. Baker, On 2016/05/23 2:09, John D. Baker wrote: > On Sun, 22 May 2016, Robert Swindells wrote: > >> I think we need to know exactly which make and model of CPU are working >> or not working. > > The following PCI (not PCIe) add-on card hangs machine under -current, > works under -7 on both (so far) problem machines: > > wm0 at pci2 dev 2 function 0: Intel i82541PI 1000BASE-T Ethernet (rev. 0x05) > wm0: interrupting at ioapic0 pin 18 > wm0: 32-bit 33MHz PCI bus > wm0: 64 words (6 address bits) MicroWire EEPROM > wm0: Ethernet address 00:1b:21:9b:14:0c > igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 > igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto
Sorry, it would be my fault. I enbuged in the code to support earlier than 82575 (include 82541) at if_wm.c:r1.401. I fixed this possibly hang bug at if_wm.c:r1.409. Could you try this revision? Thanks, -- ////////////////////////////////////////////////////////////////////// Internet Initiative Japan Inc. Device Engineering Section, IoT Platform Development Department, Network Division, Technology Unit Kengo NAKAHARA <k-nakah...@iij.ad.jp>
