hello. I'm trying to run the latest NetBSD-8 code on a Supermicro board, but I can't get the wm(4) network cards to work. The dmesg is below. NetBSD-5.2, using my production sources works just fine. It looks like an interrupt routing issue to me, but I don't understand enough about how interrupts work in NetBSD-8 yet to know what to focus on to narrow the problem down. Can someone look at the two dmesg outputs, one from NetBSD-8, the other from NetBSD-5.2 and make suggestions as to what to try to figure out what's going wrong? The NetBSD-8 sources are CVS'd from 11/28/2017.
Ideas welcome. -thanks -Brian <NetBSD-8, broken dmesg> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.0_BETA (GENERIC) #1: Tue Nov 28 11:11:37 PST 2017 buh...@lothlorien.nfbcal.org:/usr/local/netbsd/obj-80/sys/arch/i386/compile/GENERIC total memory = 3063 MB avail memory = 2992 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Supermicro X8DTU (1234567890) mainbus0 (root) ACPI: RSDP 0x00000000000FACE0 000024 (v02 ACPIAM) ACPI: XSDT 0x00000000BF790100 00008C (v01 SMCI 20120803 MSFT 00000097) ACPI: FACP 0x00000000BF790290 0000F4 (v03 080312 FACP1521 20120803 MSFT 00000097) ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20170303/tbfadt-642) ACPI: DSDT 0x00000000BF7906A0 006580 (v01 10600 10600000 00000000 INTL 20051117) ACPI: FACS 0x00000000BF79E000 000040 ACPI: FACS 0x00000000BF79E000 000040 ACPI: APIC 0x00000000BF790390 00011E (v01 080312 APIC1521 20120803 MSFT 00000097) ACPI: MCFG 0x00000000BF7904B0 00003C (v01 080312 OEMMCFG 20120803 MSFT 00000097) ACPI: SLIT 0x00000000BF7904F0 000030 (v01 080312 OEMSLIT 20120803 MSFT 00000097) ACPI: OEMB 0x00000000BF79E040 000086 (v01 080312 OEMB1521 20120803 MSFT 00000097) ACPI: SRAT 0x00000000BF79A6A0 0001A8 (v01 080312 OEMSRAT 00000001 INTL 00000001) ACPI: HPET 0x00000000BF79A850 000038 (v01 080312 OEMHPET 20120803 MSFT 00000097) ACPI: DMAR 0x00000000BF79E0D0 000128 (v01 AMI OEMDMAR 00000001 MSFT 00000097) ACPI: SSDT 0x00000000BF7A1B30 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) ACPI: EINJ 0x00000000BF79A890 000130 (v01 AMIER AMI_EINJ 20120803 MSFT 00000097) ACPI: BERT 0x00000000BF79AA20 000030 (v01 AMIER AMI_BERT 20120803 MSFT 00000097) ACPI: ERST 0x00000000BF79AA50 0001B0 (v01 AMIER AMI_ERST 20120803 MSFT 00000097) ACPI: HEST 0x00000000BF79AC00 0000A8 (v01 AMIER ABC_HEST 20120803 MSFT 00000097) ACPI: Executed 1 blocks of module-level executable AML code ACPI: 2 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 6: pa 0xfec00000, version 0x20, 24 pins ioapic1 at mainbus0 apid 7: pa 0xfec8a000, version 0x20, 24 pins cpu0 at mainbus0 apid 0 cpu0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu0: package 0, core 0, smt 0 cpu1 at mainbus0 apid 2 cpu1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu1: package 0, core 1, smt 0 cpu2 at mainbus0 apid 18 cpu2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu2: package 0, core 9, smt 0 cpu3 at mainbus0 apid 20 cpu3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu3: package 0, core 10, smt 0 cpu4 at mainbus0 apid 32 cpu4: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu4: package 1, core 0, smt 0 cpu5 at mainbus0 apid 34 cpu5: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu5: package 1, core 1, smt 0 cpu6 at mainbus0 apid 50 cpu6: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu6: package 1, core 9, smt 0 cpu7 at mainbus0 apid 52 cpu7: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu7: package 1, core 10, smt 0 cpu8 at mainbus0 apid 1 cpu8: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu8: package 0, core 0, smt 1 cpu9 at mainbus0 apid 3 cpu9: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu9: package 0, core 1, smt 1 cpu10 at mainbus0 apid 19 cpu10: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu10: package 0, core 9, smt 1 cpu11 at mainbus0 apid 21 cpu11: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu11: package 0, core 10, smt 1 cpu12 at mainbus0 apid 33 cpu12: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu12: package 1, core 0, smt 1 cpu13 at mainbus0 apid 35 cpu13: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu13: package 1, core 1, smt 1 cpu14 at mainbus0 apid 51 cpu14: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu14: package 1, core 9, smt 1 cpu15 at mainbus0 apid 53 cpu15: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2 cpu15: package 1, core 10, smt 1 acpi0 at mainbus0: Intel ACPICA 20170303 acpi0: X/RSDT: OemId <SMCI , ,20120803>, AslId <MSFT,00000097> acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000 ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C47C0000 002FB4 (v01 DpgPmm P001Ist 00000011 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C4CA400C 000961 (v01 PmRef P001Cst 00003001 INTL 20051117) acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 IOH (PNP0C01) at acpi0 not configured attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 COPR (PNP0C04) at acpi0 not configured SIOR (PNP0C02) at acpi0 not configured UAR1 (PNP0501) at acpi0 not configured UAR2 (PNP0501) at acpi0 not configured RMSC (PNP0C02) at acpi0 not configured OMSC (PNP0C02) at acpi0 not configured PCIE (PNP0C02) at acpi0 not configured RMEM (PNP0C01) at acpi0 not configured acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 1 GPEs in block 00 to 3F attimer1: attached to pcppi1 ipmi0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 8086 product 3406 (rev. 0x13) ppb0 at pci0 dev 1 function 0: vendor 8086 product 3408 (rev. 0x13) ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s ppb0: link is x4 @ 2.5GT/s pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok wm0 at pci1 dev 0 function 0: 82576 1000BaseT Ethernet (rev. 0x01) wm0: for TX and RX interrupting at msix0 vec 0 affinity to 1 wm0: for TX and RX interrupting at msix0 vec 1 affinity to 2 wm0: for TX and RX interrupting at msix0 vec 2 affinity to 3 wm0: for TX and RX interrupting at msix0 vec 3 affinity to 4 wm0: for TX and RX interrupting at msix0 vec 4 affinity to 5 wm0: for TX and RX interrupting at msix0 vec 5 affinity to 6 wm0: for TX and RX interrupting at msix0 vec 6 affinity to 7 wm0: for TX and RX interrupting at msix0 vec 7 affinity to 8 wm0: for TX and RX interrupting at msix0 vec 8 affinity to 9 wm0: for LINK interrupting at msix0 vec 9 wm0: PCI-Express bus wm0: 16384 words (16 address bits) SPI EEPROM, version 1.43, Image Unique ID e6060000 wm0: Ethernet address 00:30:48:df:99:b8 wm0: Copper wm0: 0x74440<SPI,IOH_VALID,PCIE,NEWQUEUE,ASF_FIRM,ARC_SUBSYS> igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 1 igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto wm1 at pci1 dev 0 function 1: 82576 1000BaseT Ethernet (rev. 0x01) wm1: for TX and RX interrupting at msix1 vec 0 affinity to 1 wm1: for TX and RX interrupting at msix1 vec 1 affinity to 2 wm1: for TX and RX interrupting at msix1 vec 2 affinity to 3 wm1: for TX and RX interrupting at msix1 vec 3 affinity to 4 wm1: for TX and RX interrupting at msix1 vec 4 affinity to 5 wm1: for TX and RX interrupting at msix1 vec 5 affinity to 6 wm1: for TX and RX interrupting at msix1 vec 6 affinity to 7 wm1: for TX and RX interrupting at msix1 vec 7 affinity to 8 wm1: for TX and RX interrupting at msix1 vec 8 affinity to 9 wm1: for LINK interrupting at msix1 vec 9 wm1: PCI-Express bus wm1: 16384 words (16 address bits) SPI EEPROM, version 1.43, Image Unique ID e6060000 wm1: Ethernet address 00:30:48:df:99:b9 wm1: Copper wm1: 0x74440<SPI,IOH_VALID,PCIE,NEWQUEUE,ASF_FIRM,ARC_SUBSYS> igphy1 at wm1 phy 1: i82566 10/100/1000 media interface, rev. 1 igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb1 at pci0 dev 3 function 0: vendor 8086 product 340a (rev. 0x13) ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 5 function 0: vendor 8086 product 340c (rev. 0x13) ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok ppb3 at pci0 dev 7 function 0: vendor 8086 product 340e (rev. 0x13) ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled, rd/line, wr/inv ok ixg0 at pci4 dev 0 function 0: Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k ixg0: device 82599EB ixg0: Using MSIX interrupts with 9 vectors ixg0: ETrackID 800006c5 ixg0: for TX/RX, interrupting at msix2 vec 0, bound queue 0 to cpu 0 ixg0: for TX/RX, interrupting at msix2 vec 1, bound queue 1 to cpu 1 ixg0: for TX/RX, interrupting at msix2 vec 2, bound queue 2 to cpu 2 ixg0: for TX/RX, interrupting at msix2 vec 3, bound queue 3 to cpu 3 ixg0: for TX/RX, interrupting at msix2 vec 4, bound queue 4 to cpu 4 ixg0: for TX/RX, interrupting at msix2 vec 5, bound queue 5 to cpu 5 ixg0: for TX/RX, interrupting at msix2 vec 6, bound queue 6 to cpu 6 ixg0: for TX/RX, interrupting at msix2 vec 7, bound queue 7 to cpu 7 ixg0: for link, interrupting at msix2 vec 8, affinity to cpu 8 ixg0: PCI Express Bus: Speed 5.0GT/s Width x8 ixg1 at pci4 dev 0 function 1: Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k ixg1: device 82599EB ixg1: Using MSIX interrupts with 9 vectors ixg1: RX Descriptors exceed system mbuf max, using default instead! ixg1: ETrackID 800006c5 WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules. ixg1: PHY OUI 0x000000, model 0x0000, rev. 3 ixg1: for TX/RX, interrupting at msix3 vec 0, bound queue 0 to cpu 0 ixg1: for TX/RX, interrupting at msix3 vec 1, bound queue 1 to cpu 1 ixg1: for TX/RX, interrupting at msix3 vec 2, bound queue 2 to cpu 2 ixg1: for TX/RX, interrupting at msix3 vec 3, bound queue 3 to cpu 3 ixg1: for TX/RX, interrupting at msix3 vec 4, bound queue 4 to cpu 4 ixg1: for TX/RX, interrupting at msix3 vec 5, bound queue 5 to cpu 5 ixg1: for TX/RX, interrupting at msix3 vec 6, bound queue 6 to cpu 6 ixg1: for TX/RX, interrupting at msix3 vec 7, bound queue 7 to cpu 7 ixg1: for link, interrupting at msix3 vec 8, affinity to cpu 8 WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules. ixg1: PCI Express Bus: Speed 5.0GT/s Width x8 ppb4 at pci0 dev 9 function 0: vendor 8086 product 3410 (rev. 0x13) ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled, rd/line, wr/inv ok vendor 8086 product 342d (interrupt system, IO(x) APIC, revision 0x13) at pci0 dev 19 function 0 not configured vendor 8086 product 342e (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 0 not configured vendor 8086 product 3422 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 1 not configured vendor 8086 product 3423 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 2 not configured vendor 8086 product 3438 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 3 not configured vendor 8086 product 3430 (miscellaneous system, revision 0x13) at pci0 dev 22 function 0 not configured vendor 8086 product 3431 (miscellaneous system, revision 0x13) at pci0 dev 22 function 1 not configured vendor 8086 product 3432 (miscellaneous system, revision 0x13) at pci0 dev 22 function 2 not configured vendor 8086 product 3433 (miscellaneous system, revision 0x13) at pci0 dev 22 function 3 not configured vendor 8086 product 3429 (miscellaneous system, revision 0x13) at pci0 dev 22 function 4 not configured vendor 8086 product 342a (miscellaneous system, revision 0x13) at pci0 dev 22 function 5 not configured vendor 8086 product 342b (miscellaneous system, revision 0x13) at pci0 dev 22 function 6 not configured vendor 8086 product 342c (miscellaneous system, revision 0x13) at pci0 dev 22 function 7 not configured uhci0 at pci0 dev 26 function 0: vendor 8086 product 3a37 (rev. 0x00) uhci0: interrupting at ioapic0 pin 16 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 26 function 1: vendor 8086 product 3a38 (rev. 0x00) uhci1: interrupting at ioapic0 pin 21 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 26 function 2: vendor 8086 product 3a39 (rev. 0x00) uhci2: interrupting at ioapic0 pin 19 usb2 at uhci2: USB revision 1.0 ehci0 at pci0 dev 26 function 7: vendor 8086 product 3a3c (rev. 0x00) ehci0: interrupting at ioapic0 pin 18 ehci0: EHCI version 1.0 ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2 usb3 at ehci0: USB revision 2.0 uhci3 at pci0 dev 29 function 0: vendor 8086 product 3a34 (rev. 0x00) uhci3: interrupting at ioapic0 pin 23 usb4 at uhci3: USB revision 1.0 uhci4 at pci0 dev 29 function 1: vendor 8086 product 3a35 (rev. 0x00) uhci4: interrupting at ioapic0 pin 19 usb5 at uhci4: USB revision 1.0 uhci5 at pci0 dev 29 function 2: vendor 8086 product 3a36 (rev. 0x00) uhci5: interrupting at ioapic0 pin 18 usb6 at uhci5: USB revision 1.0 ehci1 at pci0 dev 29 function 7: vendor 8086 product 3a3a (rev. 0x00) ehci1: interrupting at ioapic0 pin 23 ehci1: EHCI version 1.0 ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5 usb7 at ehci1: USB revision 2.0 ppb5 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0x90) pci6 at ppb5 bus 6 pci6: i/o space, memory space enabled vga0 at pci6 dev 1 function 0: vendor 102b product 0532 (rev. 0x0a) wsdisplay0 at vga0 kbdmux 1 wsmux1: connecting to wsdisplay0 drm at vga0 not configured ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3a16 (rev. 0x00) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer tco0 at ichlpcib0: TCO (watchdog) timer configured. tco0: Min/Max interval 1/367 seconds piixide0 at pci0 dev 31 function 2: Intel 82801JI Serial ATA Controller (ICH10) (rev. 0x00) piixide0: bus-master DMA support present piixide0: primary channel configured to native-PCI mode piixide0: using ioapic0 pin 19 for native-PCI interrupt atabus0 at piixide0 channel 0 piixide0: secondary channel configured to native-PCI mode atabus1 at piixide0 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 3a30 (rev. 0x00) ichsmb0: interrupting at ioapic0 pin 18 iic0 at ichsmb0: I2C bus piixide1 at pci0 dev 31 function 5: Intel 82801JI Serial ATA Controller (ICH10) (rev. 0x00) piixide1: bus-master DMA support present piixide1: primary channel wired to native-PCI mode piixide1: using ioapic0 pin 19 for native-PCI interrupt atabus2 at piixide1 channel 0 piixide1: secondary channel wired to native-PCI mode atabus3 at piixide1 channel 1 isa0 at ichlpcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: FFH, lat 3 us, pow 1000 mW acpicpu0: C3: FFH, lat 245 us, pow 350 mW, bus master check acpicpu0: P0: FFH, lat 10 us, pow 91000 mW, 2401 MHz, turbo boost acpicpu0: P1: FFH, lat 10 us, pow 80000 mW, 2400 MHz acpicpu0: P2: FFH, lat 10 us, pow 68000 mW, 2267 MHz acpicpu0: P3: FFH, lat 10 us, pow 57000 mW, 2133 MHz acpicpu0: P4: FFH, lat 10 us, pow 50000 mW, 2000 MHz acpicpu0: P5: FFH, lat 10 us, pow 41000 mW, 1867 MHz acpicpu0: P6: FFH, lat 10 us, pow 36000 mW, 1733 MHz acpicpu0: P7: FFH, lat 10 us, pow 30000 mW, 1600 MHz coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=95 acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=95 acpicpu2 at cpu2: ACPI CPU coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=95 acpicpu3 at cpu3: ACPI CPU coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=95 acpicpu4 at cpu4: ACPI CPU coretemp4 at cpu4: thermal sensor, 1 C resolution, Tjmax=95 acpicpu5 at cpu5: ACPI CPU coretemp5 at cpu5: thermal sensor, 1 C resolution, Tjmax=95 acpicpu6 at cpu6: ACPI CPU coretemp6 at cpu6: thermal sensor, 1 C resolution, Tjmax=95 acpicpu7 at cpu7: ACPI CPU coretemp7 at cpu7: thermal sensor, 1 C resolution, Tjmax=95 acpicpu8 at cpu8: ACPI CPU acpicpu9 at cpu9: ACPI CPU acpicpu10 at cpu10: ACPI CPU acpicpu11 at cpu11: ACPI CPU acpicpu12 at cpu12: ACPI CPU acpicpu13 at cpu13: ACPI CPU acpicpu14 at cpu14: ACPI CPU acpicpu15 at cpu15: ACPI CPU timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "TSC" frequency 2400249600 Hz quality 3000 IPsec: Initialized Security Association Processing. uhub0 at usb6: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered uhub4 at usb7: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub4: 6 ports with 6 removable, self powered uhub5 at usb2: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered uhub6 at usb4: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub6: 2 ports with 2 removable, self powered uhub7 at usb5: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub7: 2 ports with 2 removable, self powered ehci0: handing over full speed device on port 3 to uhci1 wd0 at atabus0 drive 0 wd0: <WDC WD1003FZEX-00MK2A0> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: American Megatrends Inc. (0x46b) Virtual Keyboard and Mouse (0xff10), rev 1.10/1.00, addr 2, iclass 3/1 ukbd0 at uhidev0: 8 Variable keys, 6 Array codes wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd1 at atabus1 drive 0 wd1: <WDC WD1003FZEX-00MK2A0> wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd1(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) WARNING: findroot: double match for boot device (wd0, wd1) wskbd0 at ukbd0 mux 1 wskbd0: connecting to wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 uhidev1: American Megatrends Inc. (0x46b) Virtual Keyboard and Mouse (0xff10), rev 1.10/1.00, addr 2, iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse0 at ums0 mux 0 raid0: RAID Level 1 raid0: Components: /dev/wd0a /dev/wd1a raid0: Total Sectors: 1953524992 (953869 MB) WARNING: 1 error while detecting hardware; check system log. boot device: raid0 root on raid0a dumps on raid0b root file system type: ffs kern.module.path=/stand/i386/8.0/modules /dev/raid0a: `-o softdep' is no longer supported, consider `-o log' wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) /dev/raid0a: `-o softdep' is no longer supported, consider `-o log' <Working, NetBSD-5.2> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.2_STABLE (ALTQ) #0: Mon Dec 19 16:26:24 PST 2016 buh...@lothlorien.nfbcal.org:/usr/src/sys/arch/i386/compile/ALTQ total memory = 3063 MB avail memory = 2998 MB timecounter: Timecounters tick every 1.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Supermicro X8DTU (1234567890) PCI BIOS rev. 3.0 found at 0xf0031 pcibios: config mechanism [1][x], special cycles [x][x], last bus 6 PCI IRQ Routing Table rev. 1.0 found at 0xf3cd0, size 448 bytes (26 entries) PCI Interrupt Router at 000:31:0 (Intel product 0x3a10 compatible) pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x8086 product 0x3a10 Warning: unable to fix up PCI interrupt routing mainbus0 (root) cpu0 at mainbus0 apid 0: Intel 686-class, 2448MHz, id 0x206c2 cpu1 at mainbus0 apid 2: Intel 686-class, 2448MHz, id 0x206c2 cpu2 at mainbus0 apid 18: Intel 686-class, 2448MHz, id 0x206c2 cpu3 at mainbus0 apid 20: Intel 686-class, 2448MHz, id 0x206c2 cpu4 at mainbus0 apid 32: Intel 686-class, 2448MHz, id 0x206c2 cpu5 at mainbus0 apid 34: Intel 686-class, 2448MHz, id 0x206c2 cpu6 at mainbus0 apid 50: Intel 686-class, 2448MHz, id 0x206c2 cpu7 at mainbus0 apid 52: Intel 686-class, 2448MHz, id 0x206c2 cpu8 at mainbus0 apid 1: Intel 686-class, 2448MHz, id 0x206c2 cpu9 at mainbus0 apid 3: Intel 686-class, 2448MHz, id 0x206c2 cpu10 at mainbus0 apid 19: Intel 686-class, 2448MHz, id 0x206c2 cpu11 at mainbus0 apid 21: Intel 686-class, 2448MHz, id 0x206c2 cpu12 at mainbus0 apid 33: Intel 686-class, 2448MHz, id 0x206c2 cpu13 at mainbus0 apid 35: Intel 686-class, 2448MHz, id 0x206c2 cpu14 at mainbus0 apid 51: Intel 686-class, 2448MHz, id 0x206c2 cpu15 at mainbus0 apid 53: Intel 686-class, 2448MHz, id 0x206c2 ioapic0 at mainbus0 apid 6: pa 0xfec00000, version 20, 24 pins ioapic1 at mainbus0 apid 7: pa 0xfec8a000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20080321 acpi0: X/RSDT: OemId <SMCI , ,20120803>, AslId <MSFT,00000097> acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 24-bit timer acpi: activated PNP0C0F acpi: activated PNP0C0F attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker (CPU-intensive output) spkr0 at pcppi1 sysbeep0 at pcppi1 npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured UAR2 (PNP0501) [16550A-compatible COM port] at acpi0 not configured hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000 acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button apm0 at acpi0: Power Management spec V1.2 attimer1: attached to pcppi1 ipmi0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel product 0x3406 (rev. 0x13) ppb0 at pci0 dev 1 function 0: Intel product 0x3408 (rev. 0x13) ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex> pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok wm0 at pci1 dev 0 function 0: 82576 1000BaseT Ethernet, rev. 1 wm0: interrupting at ioapic1 pin 4 wm0: PCI-Express bus wm0: 65536 word (16 address bits) SPI EEPROM wm0: Ethernet address 00:30:48:df:99:b8 igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 1 igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto wm1 at pci1 dev 0 function 1: 82576 1000BaseT Ethernet, rev. 1 wm1: interrupting at ioapic1 pin 16 wm1: PCI-Express bus wm1: 65536 word (16 address bits) SPI EEPROM wm1: Ethernet address 00:30:48:df:99:b9 igphy1 at wm1 phy 1: i82566 10/100/1000 media interface, rev. 1 igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb1 at pci0 dev 3 function 0: Intel product 0x340a (rev. 0x13) ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex> pci2 at ppb1 bus 2 pci2: no spaces enabled! ppb2 at pci0 dev 5 function 0: Intel product 0x340c (rev. 0x13) ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex> pci3 at ppb2 bus 3 pci3: no spaces enabled! ppb3 at pci0 dev 7 function 0: Intel product 0x340e (rev. 0x13) ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex> pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled, rd/line, wr/inv ok Intel product 0x154d (ethernet network, revision 0x01) at pci4 dev 0 function 0 not configured Intel product 0x154d (ethernet network, revision 0x01) at pci4 dev 0 function 1 not configured ppb4 at pci0 dev 9 function 0: Intel product 0x3410 (rev. 0x13) ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex> pci5 at ppb4 bus 5 pci5: no spaces enabled! Intel product 0x342d (interrupt system, interface 0x20, revision 0x13) at pci0 dev 19 function 0 not configured Intel product 0x342e (interrupt system, revision 0x13) at pci0 dev 20 function 0 not configured Intel product 0x3422 (interrupt system, revision 0x13) at pci0 dev 20 function 1 not configured Intel product 0x3423 (interrupt system, revision 0x13) at pci0 dev 20 function 2 not configured Intel product 0x3438 (interrupt system, revision 0x13) at pci0 dev 20 function 3 not configured Intel product 0x3430 (miscellaneous system, revision 0x13) at pci0 dev 22 function 0 not configured Intel product 0x3431 (miscellaneous system, revision 0x13) at pci0 dev 22 function 1 not configured Intel product 0x3432 (miscellaneous system, revision 0x13) at pci0 dev 22 function 2 not configured Intel product 0x3433 (miscellaneous system, revision 0x13) at pci0 dev 22 function 3 not configured Intel product 0x3429 (miscellaneous system, revision 0x13) at pci0 dev 22 function 4 not configured Intel product 0x342a (miscellaneous system, revision 0x13) at pci0 dev 22 function 5 not configured Intel product 0x342b (miscellaneous system, revision 0x13) at pci0 dev 22 function 6 not configured Intel product 0x342c (miscellaneous system, revision 0x13) at pci0 dev 22 function 7 not configured uhci0 at pci0 dev 26 function 0: Intel product 0x3a37 (rev. 0x00) uhci0: interrupting at ioapic0 pin 16 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 26 function 1: Intel product 0x3a38 (rev. 0x00) uhci1: interrupting at ioapic0 pin 21 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 26 function 2: Intel product 0x3a39 (rev. 0x00) uhci2: interrupting at ioapic0 pin 19 usb2 at uhci2: USB revision 1.0 ehci0 at pci0 dev 26 function 7: Intel product 0x3a3c (rev. 0x00) ehci0: interrupting at ioapic0 pin 18 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 usb3 at ehci0: USB revision 2.0 uhci3 at pci0 dev 29 function 0: Intel product 0x3a34 (rev. 0x00) uhci3: interrupting at ioapic0 pin 23 usb4 at uhci3: USB revision 1.0 uhci4 at pci0 dev 29 function 1: Intel product 0x3a35 (rev. 0x00) uhci4: interrupting at ioapic0 pin 19 usb5 at uhci4: USB revision 1.0 uhci5 at pci0 dev 29 function 2: Intel product 0x3a36 (rev. 0x00) uhci5: interrupting at ioapic0 pin 18 usb6 at uhci5: USB revision 1.0 ehci1 at pci0 dev 29 function 7: Intel product 0x3a3a (rev. 0x00) ehci1: interrupting at ioapic0 pin 23 ehci1: EHCI version 1.0 ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5 usb7 at ehci1: USB revision 2.0 ppb5 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x90) pci6 at ppb5 bus 6 pci6: i/o space, memory space enabled vga1 at pci6 dev 1 function 0: Matrox product 0x0532 (rev. 0x0a) wsdisplay0 at vga1 kbdmux 1 wsmux1: connecting to wsdisplay0 drm at vga1 not configured pcib0 at pci0 dev 31 function 0 pcib0: Intel ICH10R Watchdog timer (rev. 0x00) piixide0 at pci0 dev 31 function 2 piixide0: Intel ICH10 Serial ATA 2 Controller 4x2 (rev. 0x00) piixide0: bus-master DMA support present piixide0: primary channel configured to native-PCI mode piixide0: using ioapic0 pin 19 for native-PCI interrupt atabus0 at piixide0 channel 0 piixide0: secondary channel configured to native-PCI mode atabus1 at piixide0 channel 1 ichsmb0 at pci0 dev 31 function 3: Intel ICH10 SMBus Serial Bus 1 (rev. 0x00) ichsmb0: interrupting at ioapic0 pin 18 iic0 at ichsmb0: I2C bus piixide1 at pci0 dev 31 function 5 piixide1: Intel ICH10 Serial ATA 2 Controller 2x2 (rev. 0x00) piixide1: bus-master DMA support present piixide1: primary channel wired to native-PCI mode piixide1: using ioapic0 pin 19 for native-PCI interrupt atabus2 at piixide1 channel 0 piixide1: secondary channel wired to native-PCI mode atabus3 at piixide1 channel 1 isa0 at pcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 timecounter: Timecounter "clockinterrupt" frequency 1000 Hz quality 0 uhub0 at usb4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb6: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhub5 at usb3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub5: 6 ports with 6 removable, self powered uhub6 at usb2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub6: 2 ports with 2 removable, self powered IPsec: Initialized Security Association Processing. uhub7 at usb7: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub7: 6 ports with 6 removable, self powered uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd0 at ukbd0 mux 1 wskbd0: connecting to wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 uhidev1: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, addr 2, iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse0 at ums0 mux 0 wd0 at atabus0 drive 0: <WDC WD1003FZEX-00MK2A0> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd1 at atabus1 drive 0: <WDC WD1003FZEX-00MK2A0> wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd1(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 Kernelized RAIDframe activated raid0: RAID Level 1 raid0: Components: /dev/wd0a /dev/wd1a raid0: Total Sectors: 1953524992 (953869 MB) boot device: raid0 root on raid0a dumps on raid0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)