I'll take the call off the air :-)
On 2/15/06, Stephane E. Potvin <[EMAIL PROTECTED]> wrote: > Hi Matt, > > I've tried the driver with a Sun Galaxy x4200. I'm running this on a single > drive, > no raid-0 or raid-1 enabled in the controller bios. I installed using an iso > generated from sources fetched a few hours after this commit. The driver works > well if I don't try to push it. As soon as I try to push it a little (checkout > of ports tree or delete of ports tree), it start to generate the following > errors: > > mpt0: Attempting to Abort Rex 0xffffffff80c49fd0 > mpt0: Attempting to Abort Rex 0xffffffff80c49fd0 > mpt0: Attempting to Abort Rex 0xffffffff80c49fd0 > . > . > . > on the console repetitively, with some > > mpt0: Requext 0xffffffff80c4xxxx Timed out. > > lines once in a while. (xxxx varies in this case). > > I'm trying to get a serial console hooked up on the system so I can enter ddb. > (The system doesn't have a ps/2 port and using ddb with a usb keyboard doesn't > seems to work). > > I'm attaching a verbose dmesg in case it helps. Is there anything I can > provide/do > you to help you diagnose this? > > Regards, > > Steph > > Matt Jacob wrote: > > mjacob 2006-02-11 01:35:29 UTC > > > > FreeBSD src repository > > > > Modified files: > > sys/dev/mpt mpt.c mpt.h mpt_cam.c mpt_debug.c > > mpt_pci.c > > Log: > > Do initial cut of SAS HBA support. These controllers (106X) seem to > > support > > automatically both SATA and SAS drives. The async SAS event handling we > > catch > > but ignore at present (so automagic attach/detach isn't hooked up yet). > > > > Do 64 bit PCI support- we can now work on systems with > 4GB of memory. > > > > Do large transfer support- we now can support up to reported chain depth, > > or > > the length of our request area. We simply allocate additional request > > elements > > when we would run out of room for chain lists. > > > > Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. > > There were no RAID cards available for me to regression test. > > > > The error recovery for this driver still is pretty bad. > > > > Revision Changes Path > > 1.15 +114 -29 src/sys/dev/mpt/mpt.c > > 1.10 +42 -32 src/sys/dev/mpt/mpt.h > > 1.4 +283 -119 src/sys/dev/mpt/mpt_cam.c > > 1.10 +59 -20 src/sys/dev/mpt/mpt_debug.c > > 1.23 +91 -25 src/sys/dev/mpt/mpt_pci.c > > _______________________________________________ > > cvs-all@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/cvs-all > > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > > > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 7.0-20060211-SNAP #0: Sun Feb 12 08:19:17 UTC 2006 > [EMAIL PROTECTED]:/usr/obj/amd64/usr/src/sys/GENERIC > WARNING: WITNESS option enabled, expect reduced performance. > Using 16 colors for the VM-PQ tuning (1024, 16) > Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80a5b000. > ACPI APIC Table: <SUN X4200 > > Calibrating clock(s) ... i8254 clock: 1193144 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 2193767182 Hz > CPU: Dual Core AMD Opteron(tm) Processor 275 (2193.77-MHz K8-class CPU) > Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2 > > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x1<SSE3> > AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> > AMD Features2=0x3<LAHF,CMP> > HTT bit cleared - FreeBSD does not have licensing issues requiring it. > > Cores per package: 2 > L1 2MB data TLB: 8 entries, fully associative > L1 2MB instruction TLB: 8 entries, fully associative > L1 4KB data TLB: 32 entries, fully associative > L1 4KB instruction TLB: 32 entries, fully associative > L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L2 2MB unified TLB: 0 entries, disabled/not present > L2 4KB data TLB: 512 entries, 4-way associative > L2 4KB instruction TLB: 512 entries, 4-way associative > L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative > usable memory = 8444366848 (8053 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages) > 0x0000000000b5c000 - 0x00000000f7feffff, 4148772864 bytes (1012884 pages) > 0x0000000100000000 - 0x00000001f0fbffff, 4043046912 bytes (987072 pages) > avail memory = 8181329920 (7802 MB) > APIC ID: physical 0, logical 0:0 > APIC ID: physical 1, logical 0:1 > APIC ID: physical 2, logical 0:2 > APIC ID: physical 3, logical 0:3 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > APIC: CPU 0 has ACPI ID 1 > APIC: CPU 1 has ACPI ID 2 > APIC: CPU 2 has ACPI ID 3 > APIC: CPU 3 has ACPI ID 4 > MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 > ioapic0: Routing external 8259A's -> intpin 0 > ioapic0: intpin 0 -> ExtINT (edge, high) > ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) > ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) > ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) > ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) > ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) > ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) > ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) > ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) > ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) > ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) > ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) > ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) > ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) > ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) > ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) > ioapic0: intpin 16 -> PCI IRQ 16 (level, low) > ioapic0: intpin 17 -> PCI IRQ 17 (level, low) > ioapic0: intpin 18 -> PCI IRQ 18 (level, low) > ioapic0: intpin 19 -> PCI IRQ 19 (level, low) > ioapic0: intpin 20 -> PCI IRQ 20 (level, low) > ioapic0: intpin 21 -> PCI IRQ 21 (level, low) > ioapic0: intpin 22 -> PCI IRQ 22 (level, low) > ioapic0: intpin 23 -> PCI IRQ 23 (level, low) > MADT: Found IO APIC ID 5, Interrupt 24 at 0xfe6ff000 > ioapic1: intpin 0 -> PCI IRQ 24 (level, low) > ioapic1: intpin 1 -> PCI IRQ 25 (level, low) > ioapic1: intpin 2 -> PCI IRQ 26 (level, low) > ioapic1: intpin 3 -> PCI IRQ 27 (level, low) > MADT: Found IO APIC ID 6, Interrupt 28 at 0xfe6fe000 > ioapic2: intpin 0 -> PCI IRQ 28 (level, low) > ioapic2: intpin 1 -> PCI IRQ 29 (level, low) > ioapic2: intpin 2 -> PCI IRQ 30 (level, low) > ioapic2: intpin 3 -> PCI IRQ 31 (level, low) > MADT: Found IO APIC ID 7, Interrupt 32 at 0xfeaff000 > ioapic3: intpin 0 -> PCI IRQ 32 (level, low) > ioapic3: intpin 1 -> PCI IRQ 33 (level, low) > ioapic3: intpin 2 -> PCI IRQ 34 (level, low) > ioapic3: intpin 3 -> PCI IRQ 35 (level, low) > MADT: Found IO APIC ID 8, Interrupt 36 at 0xfeafe000 > ioapic4: intpin 0 -> PCI IRQ 36 (level, low) > ioapic4: intpin 1 -> PCI IRQ 37 (level, low) > ioapic4: intpin 2 -> PCI IRQ 38 (level, low) > ioapic4: intpin 3 -> PCI IRQ 39 (level, low) > MADT: Interrupt override: source 0, irq 2 > ioapic0: Routing IRQ 0 -> intpin 2 > ioapic0: intpin 2 trigger: edge > ioapic0: intpin 2 polarity: high > MADT: Forcing active-low polarity and level trigger for SCI > ioapic0: intpin 9 polarity: low > ioapic0: intpin 9 trigger: level > ioapic0 <Version 1.1> irqs 0-23 on motherboard > ioapic1 <Version 1.1> irqs 24-27 on motherboard > ioapic2 <Version 1.1> irqs 28-31 on motherboard > ioapic3 <Version 1.1> irqs 32-35 on motherboard > ioapic4 <Version 1.1> irqs 36-39 on motherboard > cpu0 BSP: > ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00000000 err: 0x0001000f pcm: 0x00010000 > wlan: <802.11 Link Layer> > null: <null device, zero device> > random: <entropy source, Software, Yarrow> > nfslock: pseudo-device > mem: <memory> > io: <I/O> > acpi0: <SUN X4200> on motherboard > ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 > acpi0: [MPSAFE] > pci_open(1): mode 1 addr port (0x0cf8) is 0x8000c29c > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 1 [class=060400] [hdr=81] is there (id=74501022) > AcpiOsDerivePciId: bus 0 dev 7 func 0 > AcpiOsDerivePciId: bus 0 dev 7 func 1 > AcpiOsDerivePciId: bus 0 dev 7 func 3 > acpi0: Power Button (fixed) > AcpiOsDerivePciId: bus 0 dev 1 func 0 > AcpiOsDerivePciId: bus 0 dev 2 func 0 > AcpiOsDerivePciId: bus 4 dev 1 func 0 > AcpiOsDerivePciId: bus 4 dev 2 func 0 > pci_link0: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link0: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link0: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link1: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link1: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link1: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link2: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link2: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link2: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link3: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link3: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link3: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 > ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > acpi_throttle0: P_CNT from P_BLK 0x5010 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: physical bus=0 > found-> vendor=0x1022, dev=0x7450, revid=0x13 > bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x7451, revid=0x01 > bus=0, slot=1, func=1 > class=08-00-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[10]: type 1, range 64, base fe6ff000, size 12, enabled > found-> vendor=0x1022, dev=0x7450, revid=0x13 > bus=0, slot=2, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x7451, revid=0x01 > bus=0, slot=2, func=1 > class=08-00-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[10]: type 1, range 64, base fe6fe000, size 12, enabled > found-> vendor=0x1022, dev=0x7460, revid=0x07 > bus=0, slot=6, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x7468, revid=0x05 > bus=0, slot=7, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x7469, revid=0x03 > bus=0, slot=7, func=1 > class=01-01-8a, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[20]: type 4, range 32, base 0000ffa0, size 4, enabled > found-> vendor=0x1022, dev=0x746a, revid=0x02 > bus=0, slot=7, func=2 > class=0c-05-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0001, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=d, irq=11 > map[10]: type 4, range 32, base 0000cc00, size 5, enabled > pcib0: matched entry for 0.7.INTD > pcib0: slot 7 INTD hardwired to IRQ 19 > found-> vendor=0x1022, dev=0x746b, revid=0x05 > bus=0, slot=7, func=3 > class=06-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1100, revid=0x00 > bus=0, slot=24, func=0 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1101, revid=0x00 > bus=0, slot=24, func=1 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1102, revid=0x00 > bus=0, slot=24, func=2 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1103, revid=0x00 > bus=0, slot=24, func=3 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1100, revid=0x00 > bus=0, slot=25, func=0 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1101, revid=0x00 > bus=0, slot=25, func=1 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1102, revid=0x00 > bus=0, slot=25, func=2 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1103, revid=0x00 > bus=0, slot=25, func=3 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0x9000-0x9fff > pcib1: memory decode 0xfbf00000-0xfbffffff > pcib1: prefetched decode 0xfe700000-0xfe7fffff > pci1: <ACPI PCI bus> on pcib1 > pci1: physical bus=1 > found-> vendor=0x8086, dev=0x1010, revid=0x03 > bus=1, slot=1, func=0 > class=02-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type 1, range 64, base fbfe0000, size 17, enabled > pcib1: (null) requested memory range 0xfbfe0000-0xfbffffff: good > map[20]: type 4, range 32, base 00009c00, size 6, enabled > pcib1: (null) requested I/O range 0x9c00-0x9c3f: in range > pcib1: matched entry for 1.1.INTA > pcib1: slot 1 INTA hardwired to IRQ 26 > found-> vendor=0x8086, dev=0x1010, revid=0x03 > bus=1, slot=1, func=1 > class=02-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) > intpin=b, irq=11 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type 1, range 64, base fbfc0000, size 17, enabled > pcib1: (null) requested memory range 0xfbfc0000-0xfbfdffff: good > map[20]: type 4, range 32, base 00009800, size 6, enabled > pcib1: (null) requested I/O range 0x9800-0x983f: in range > pcib1: matched entry for 1.1.INTB > pcib1: slot 1 INTB hardwired to IRQ 27 > found-> vendor=0x8086, dev=0x1010, revid=0x03 > bus=1, slot=2, func=0 > class=02-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type 1, range 64, base fbfa0000, size 17, enabled > pcib1: (null) requested memory range 0xfbfa0000-0xfbfbffff: good > map[20]: type 4, range 32, base 00009400, size 6, enabled > pcib1: (null) requested I/O range 0x9400-0x943f: in range > pcib1: matched entry for 1.2.INTA > pcib1: slot 2 INTA hardwired to IRQ 24 > found-> vendor=0x8086, dev=0x1010, revid=0x03 > bus=1, slot=2, func=1 > class=02-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) > intpin=b, irq=9 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type 1, range 64, base fbf80000, size 17, enabled > pcib1: (null) requested memory range 0xfbf80000-0xfbf9ffff: good > map[20]: type 4, range 32, base 00009000, size 6, enabled > pcib1: (null) requested I/O range 0x9000-0x903f: in range > pcib1: matched entry for 1.2.INTB > pcib1: slot 2 INTB hardwired to IRQ 25 > em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port > 0x9c00-0x9c3f mem 0xfbfe0000-0xfbffffff irq 26 at device 1.0 on pci1 > em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfe0000 > em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x9c00 > em0: bpf attached > em0: Ethernet address: 00:14:4f:01:2d:74 > ioapic1: routing intpin 2 (PCI IRQ 26) to vector 49 > em0: [FAST] > em0: Speed:N/A Duplex:N/A > em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port > 0x9800-0x983f mem 0xfbfc0000-0xfbfdffff irq 27 at device 1.1 on pci1 > em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfc0000 > em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x9800 > em1: bpf attached > em1: Ethernet address: 00:14:4f:01:2d:75 > ioapic1: routing intpin 3 (PCI IRQ 27) to vector 50 > em1: [FAST] > em1: Speed:N/A Duplex:N/A > em2: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port > 0x9400-0x943f mem 0xfbfa0000-0xfbfbffff irq 24 at device 2.0 on pci1 > em2: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfa0000 > em2: Reserved 0x40 bytes for rid 0x20 type 4 at 0x9400 > em2: bpf attached > em2: Ethernet address: 00:14:4f:01:2d:7a > ioapic1: routing intpin 0 (PCI IRQ 24) to vector 51 > em2: [FAST] > em2: Speed:N/A Duplex:N/A > em3: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port > 0x9000-0x903f mem 0xfbf80000-0xfbf9ffff irq 25 at device 2.1 on pci1 > em3: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbf80000 > em3: Reserved 0x40 bytes for rid 0x20 type 4 at 0x9000 > em3: bpf attached > em3: Ethernet address: 00:14:4f:01:2d:7b > ioapic1: routing intpin 1 (PCI IRQ 25) to vector 52 > em3: [FAST] > em3: Speed:N/A Duplex:N/A > pci0: <base peripheral, interrupt controller> at device 1.1 (no driver > attached) > pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: I/O decode 0xa000-0xafff > pcib2: memory decode 0xfc000000-0xfc4fffff > pcib2: prefetched decode 0xfe800000-0xfe8fffff > pci2: <ACPI PCI bus> on pcib2 > pci2: physical bus=2 > found-> vendor=0x1000, dev=0x0050, revid=0x02 > bus=2, slot=3, func=0 > class=01-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) > lattimer=0x48 (2160 ns), mingnt=0x40 (16000 ns), maxlat=0x0a (2500 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type 4, range 32, base 0000a800, size 8, enabled > pcib2: (null) requested I/O range 0xa800-0xa8ff: in range > map[14]: type 1, range 64, base fc0fc000, size 14, enabled > pcib2: (null) requested memory range 0xfc0fc000-0xfc0fffff: good > map[1c]: type 1, range 64, base fc0e0000, size 16, enabled > pcib2: (null) requested memory range 0xfc0e0000-0xfc0effff: good > pcib2: matched entry for 2.3.INTA > pcib2: slot 3 INTA hardwired to IRQ 28 > mpt0: <LSILogic SAS Adapter> port 0xa800-0xa8ff mem > 0xfc0fc000-0xfc0fffff,0xfc0e0000-0xfc0effff irq 28 at device 3.0 on pci2 > mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa800 > mpt0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xfc0fc000 > ioapic2: routing intpin 0 (PCI IRQ 28) to vector 53 > mpt0: [GIANT-LOCKED] > mpt0: MPI Version=1.5.9.0 > mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). > mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required). > mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required). > mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required). > mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required). > mpt0: Capabilities: ( RAID-0 RAID-1 ) > mpt0: 0 Active Volumes (2 Max) > mpt0: 0 Hidden Drive Members (10 Max) > pci0: <base peripheral, interrupt controller> at device 2.1 (no driver > attached) > pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pcib3: secondary bus 3 > pcib3: subordinate bus 3 > pcib3: I/O decode 0xb000-0xbfff > pcib3: memory decode 0xfc500000-0xfe5fffff > pcib3: prefetched decode 0xfff00000-0xfffff > pci3: <ACPI PCI bus> on pcib3 > pci3: physical bus=3 > found-> vendor=0x1022, dev=0x7464, revid=0x0b > bus=3, slot=0, func=0 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) > intpin=d, irq=11 > map[10]: type 1, range 32, base fe1fe000, size 12, enabled > pcib3: (null) requested memory range 0xfe1fe000-0xfe1fefff: good > pcib3: matched entry for 3.0.INTD > pcib3: slot 0 INTD hardwired to IRQ 19 > found-> vendor=0x1022, dev=0x7464, revid=0x0b > bus=3, slot=0, func=1 > class=0c-03-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) > intpin=d, irq=11 > map[10]: type 1, range 32, base fe1fd000, size 12, enabled > pcib3: (null) requested memory range 0xfe1fd000-0xfe1fdfff: good > pcib3: matched entry for 3.0.INTD > pcib3: slot 0 INTD hardwired to IRQ 19 > found-> vendor=0x1002, dev=0x4752, revid=0x27 > bus=3, slot=3, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base fd000000, size 24, enabled > pcib3: (null) requested memory range 0xfd000000-0xfdffffff: good > map[14]: type 4, range 32, base 0000b800, size 8, enabled > pcib3: (null) requested I/O range 0xb800-0xb8ff: in range > map[18]: type 1, range 32, base fe1ff000, size 12, enabled > pcib3: (null) requested memory range 0xfe1ff000-0xfe1fffff: good > pcib3: matched entry for 3.3.INTA > pcib3: slot 3 INTA hardwired to IRQ 16 > ohci0: <OHCI (generic) USB controller> mem 0xfe1fe000-0xfe1fefff irq 19 at > device 0.0 on pci3 > ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe1fe000 > ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: <AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 3 ports with 3 removable, self powered > ohci1: <OHCI (generic) USB controller> mem 0xfe1fd000-0xfe1fdfff irq 19 at > device 0.1 on pci3 > ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe1fd000 > ohci1: [GIANT-LOCKED] > usb1: OHCI version 1.0, legacy support > usb1: SMM does not respond, resetting > usb1: <OHCI (generic) USB controller> on ohci1 > usb1: USB revision 1.0 > uhub1: <AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 3 ports with 3 removable, self powered > vgapci0: <VGA-compatible display> port 0xb800-0xb8ff mem > 0xfd000000-0xfdffffff,0xfe1ff000-0xfe1fffff irq 16 at device 3.0 on pci3 > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <AMD 8111 UDMA133 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 > ata0: <ATA channel 0> on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=03 ostat0=50 ostat1=00 > ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 > ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb > ata0: stat1=0x01 err=0x01 lsb=0x01 msb=0x01 > ata0: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER> > ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55 > ata0: [MPSAFE] > ata1: <ATA channel 1> on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=00 ostat0=ff ostat1=ff > ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56 > ata1: [MPSAFE] > pci0: <serial bus, SMBus> at device 7.2 (no driver attached) > pci0: <bridge> at device 7.3 (no driver attached) > pcib4: <ACPI Host-PCI bridge> on acpi0 > pcib4: could not get PCI interrupt routing table for \\_SB_.PCIB - > AE_NOT_FOUND > pci4: <ACPI PCI bus> on pcib4 > pci4: physical bus=4 > found-> vendor=0x1022, dev=0x7450, revid=0x13 > bus=4, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0116, statreg=0x0230, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x7451, revid=0x01 > bus=4, slot=1, func=1 > class=08-00-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[10]: type 1, range 64, base feaff000, size 12, enabled > found-> vendor=0x1022, dev=0x7450, revid=0x13 > bus=4, slot=2, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0116, statreg=0x0230, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x7451, revid=0x01 > bus=4, slot=2, func=1 > class=08-00-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[10]: type 1, range 64, base feafe000, size 12, enabled > pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci4 > pcib5: secondary bus 5 > pcib5: subordinate bus 5 > pcib5: I/O decode 0x0-0x0 > pcib5: memory decode 0xfff00000-0xfffff > pcib5: prefetched decode 0xfff00000-0xfffff > pci5: <ACPI PCI bus> on pcib5 > pci5: physical bus=5 > pci4: <base peripheral, interrupt controller> at device 1.1 (no driver > attached) > pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci4 > pcib6: secondary bus 6 > pcib6: subordinate bus 6 > pcib6: I/O decode 0x0-0x0 > pcib6: memory decode 0xfff00000-0xfffff > pcib6: prefetched decode 0xfff00000-0xfffff > pci6: <ACPI PCI bus> on pcib6 > pci6: physical bus=6 > pci4: <base peripheral, interrupt controller> at device 2.1 (no driver > attached) > acpi_button0: <Power Button> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > psm0: unable to allocate IRQ > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: irq maps: 0 0 0 0 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57 > acpi_hpet0: <HPET - High Precision Event Timers> iomem 0xfec01000-0xfec013ff > irq 0,8 on acpi0 > acpi_hpet0: Vendor: 0x1022 > acpi_hpet0: Leg_Route_Cap: 1 > acpi_hpet0: Count_Size_Cap: 0 > acpi_hpet0: Num_Tim_Cap: 8 > acpi_hpet0: Rev_id: 0x3 > acpi_hpet0: Period: 69841279 fs (14318180 Hz) > acpi_hpet0: HPET attach > Timecounter "HPET" frequency 14318180 Hz quality -200 > ahc_isa_probe 0: ioport 0xc00 alloc failed > ahc_isa_probe 9: ioport 0x9c00 alloc failed > ahc_isa_probe 12: ioport 0xcc00 alloc failed > atkbdc: atkbdc0 already exists; skipping it > sio: sio0 already exists; skipping it > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > ex_isa_identify() > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xc9fff,0xca000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff,0xce000-0xd27ff,0xd2800-0xd37ff > pnpid ORM0000 on isa0 > fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > ppc0: cannot reserve I/O port range > ppc0: <Parallel port> failed to probe at irq 7 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, terminal emulator: sc (syscons terminal) > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: irq maps: 0 0 0 0 > sio1: probe failed test(s): 0 1 2 4 6 7 9 > sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > sio2: not probed (disabled) > sio3: not probed (disabled) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > isa_probe_children: probing PnP devices > ukbd0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev > 1.10/1.00, addr 2> on uhub0 > ukbd0: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, > addr 2, iclass 3/1 > kbd0 at ukbd0 > kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000 > ums0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev > 1.10/1.00, addr 2> on uhub0 > ums0: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, > addr 2, iclass 3/1 > ums0: X report 0x0002 not supported > device_attach: ums0 attach returned 6 > umass0: <American Megatrends Inc. Virtual Cdrom Device, class 0/0, rev > 1.10/1.00, addr 2> on uhub1 > umass0: American Megatrends Inc. Virtual Cdrom Device, rev 1.10/1.00, addr 2 > umass0:2:0:-1: Attached to scbus2 > umass1: <American Megatrends Inc. Virtual Floppy Device, class 0/0, rev > 1.10/1.00, addr 3> on uhub1 > umass1: American Megatrends Inc. Virtual Floppy Device, rev 1.10/1.00, addr 3 > umass1:3:1:-1: Attached to scbus3 > uhub2: <vendor 0x03eb Standard USB Hub, class 9/0, rev 1.10/3.00, addr 4> on > uhub1 > uhub2: vendor 0x03eb Standard USB Hub, class 9/0, rev 1.10/3.00, addr 4 > uhub2: 4 ports with 4 removable, self powered > Device configuration finished. > Reducing kern.maxvnodes 249660 -> 100000 > procfs registered > linprocfs registered > lapic: Divisor 2, Frequency 99716690 hz > Timecounter "TSC" frequency 2193767182 Hz quality -100 > Timecounters tick every 1.000 msec > module_register_init: MOD_LOAD (amr_linux, 0xffffffff805faf30, 0) error 6 > Linux ELF exec handler installed > lo0: bpf attached > em0: Link is up 1000 Mbps Full Duplex > ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire > acd0: setting PIO4 on 8111 chip > acd0: setting UDMA33 on 8111 chip > acd0: <DV-28SL/1.0A> DVDROM drive at ata0 as master > acd0: read 4134KB/s (4134KB/s), 256KB buffer, UDMA33 > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet > acd0: Writes: > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > ukbd1: <vendor 0x0566 product 0x3002, class 0/0, rev 1.10/1.00, addr 5> on > uhub2 > ukbd1: vendor 0x0566 product 0x3002, rev 1.10/1.00, addr 5, iclass 3/1 > kbd: new array size 4 > kbd1 at ukbd1 > kbd1: ukbd1, generic (0), config:0x0, flags:0x1d0000 > uhid0: <vendor 0x0566 product 0x3002, class 0/0, rev 1.10/1.00, addr 5> on > uhub2 > uhid0: vendor 0x0566 product 0x3002, rev 1.10/1.00, addr 5, iclass 3/1 > (probe63:mpt0:1:0:0): error 22 > (probe63:mpt0:1:0:0): Unretryable Error > (probe64:mpt0:1:1:0): error 22 > (probe64:mpt0:1:1:0): Unretryable Error > (probe65:mpt0:1:2:0): error 22 > (probe65:mpt0:1:2:0): Unretryable Error > (probe66:mpt0:1:3:0): error 22 > (probe66:mpt0:1:3:0): Unretryable Error > (probe67:mpt0:1:4:0): error 22 > (probe67:mpt0:1:4:0): Unretryable Error > (probe68:mpt0:1:5:0): error 22 > (probe68:mpt0:1:5:0): Unretryable Error > (probe69:mpt0:1:6:0): error 22 > (probe69:mpt0:1:6:0): Unretryable Error > (probe70:mpt0:1:7:0): error 22 > (probe70:mpt0:1:7:0): Unretryable Error > (probe71:mpt0:1:8:0): error 22 > (probe71:mpt0:1:8:0): Unretryable Error > (probe72:mpt0:1:9:0): error 22 > (probe72:mpt0:1:9:0): Unretryable Error > (probe73:mpt0:1:10:0): error 22 > (probe73:mpt0:1:10:0): Unretryable Error > pass0 at mpt0 bus 0 target 0 lun 0 > pass0: <FUJITSU MAV2073RCSUN72G 0301> Fixed Direct Access SCSI-4 device > pass0: Serial Number 000545S00RM2 > pass0: 300.000MB/s transfers, Tagged Queueing Enabled > pass1 at mpt0 bus 0 target 1 lun 0 > pass1: <FUJITSU MAV2073RCSUN72G 0301> Fixed Direct Access SCSI-4 device > pass1: Serial Number 000545S00RFT > pass1: 300.000MB/s transfers, Tagged Queueing Enabled > pass2 at mpt0 bus 0 target 2 lun 0 > pass2: <FUJITSU MAV2073RCSUN72G 0301> Fixed Direct Access SCSI-4 device > pass2: Serial Number 000533S009D9 > pass2: 300.000MB/s transfers, Tagged Queueing Enabled > pass3 at mpt0 bus 0 target 3 lun 0 > pass3: <FUJITSU MAV2073RCSUN72G 0301> Fixed Direct Access SCSI-4 device > pass3: Serial Number 000533S008PL > pass3: 300.000MB/s transfers, Tagged Queueing Enabled > pass4 at umass-sim0 bus 0 target 0 lun 0 > pass4: <AMI Virtual CDROM 1.00> Removable CD-ROM SCSI-0 device > pass4: Serial Number \M-z > pass4: 1.000MB/s transfers > pass5 at umass-sim1 bus 1 target 0 lun 0 > pass5: <AMI Virtual Floppy 1.00> Removable Direct Access SCSI-0 device > pass5: Serial Number \M-z > pass5: 1.000MB/s transfers > da0 at mpt0 bus 0 target 0 lun 0 > da0: <FUJITSU MAV2073RCSUN72G 0301> Fixed Direct Access SCSI-4 device > da0: Serial Number 000545S00RM2 > da0: 300.000MB/s transfers, Tagged Queueing Enabled > da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) > da1 at mpt0 bus 0 target 1 lun 0 > da1: <FUJITSU MAV2073RCSUN72G 0301> Fixed Direct Access SCSI-4 device > da1: Serial Number 000545S00RFT > da1: 300.000MB/s transfers, Tagged Queueing Enabled > da1: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) > da2 at mpt0 bus 0 target 2 lun 0 > da2: <FUJITSU MAV2073RCSUN72G 0301> Fixed Direct Access SCSI-4 device > da2: Serial Number 000533S009D9 > da2: 300.000MB/s transfers, Tagged Queueing Enabled > da2: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) > da3 at mpt0 bus 0 target 3 lun 0 > da3: <FUJITSU MAV2073RCSUN72G 0301> Fixed Direct Access SCSI-4 device > da3: Serial Number 000533S008PL > da3: 300.000MB/s transfers, Tagged Queueing Enabled > da3: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) > GEOM: new disk cd0 > GEOM: new disk da0 > GEOM: new disk da1 > GEOM: new disk da2 > GEOM: new disk da3 > GEOM: new disk da4 > ATA PseudoRAID loaded > SMP: AP CPU #1 Launched! > cpu1 AP: > ID: 0x01000000 VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 > SMP: AP CPU #3 Launched! > cpu3 AP: > ID: 0x03000000 VER: 0x00040010 LDR: 0x08000000 DFR: 0x0fffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 > SMP: AP CPU #2 Launched! > cpu2 AP: > ID: 0x02000000 VER: 0x00040010 LDR: 0x04000000 DFR: 0x0fffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 > ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 > ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 > ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 > ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 > ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 > ioapic1: routing intpin 0 (PCI IRQ 24) to cluster 0 > ioapic1: routing intpin 1 (PCI IRQ 25) to cluster 0 > ioapic1: routing intpin 2 (PCI IRQ 26) to cluster 0 > ioapic1: routing intpin 3 (PCI IRQ 27) to cluster 0 > ioapic2: routing intpin 0 (PCI IRQ 28) to cluster 0 > (cd0:umass-sim0:0:0:0): Retrying Command > (da4:umass-sim1:1:0:0): Retrying Command > (cd0:umass-sim0:0:0:0): error 6 > (cd0:umass-sim0:0:0:0): Unretryable Error > cd0 at umass-sim0 bus 0 target 0 lun 0 > cd0: <AMI Virtual CDROM 1.00> Removable CD-ROM SCSI-0 device > cd0: Serial Number \M-z > cd0: 1.000MB/s transfers > cd0: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready > change, medium may have changed > (da4:umass-sim1:1:0:0): Retrying Command > (da4:umass-sim1:1:0:0): Retrying Command > (cd0:umass-sim0:0:0:0): Retrying Command > (da4:umass-sim1:1:0:0): Retrying Command > (cd0:umass-sim0:0:0:0): error 6 > (cd0:umass-sim0:0:0:0): Unretryable Error > (da4:umass-sim1:1:0:0): error 6 > (da4:umass-sim1:1:0:0): Unretryable Error > da4 at umass-sim1 bus 1 target 0 lun 0 > da4: <AMI Virtual Floppy 1.00> Removable Direct Access SCSI-0 device > da4: Serial Number \M-z > da4: 1.000MB/s transfers > da4: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready > change, > (cd0:umass-sim0:0:0:0): Retrying Command > (cd0:umass-sim0:0:0:0): error 6 > (cd0:umass-sim0:0:0:0): Unretryable Error > (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da4:umass-sim1:1:0:0): CAM Status: SCSI Status Error > (da4:umass-sim1:1:0:0): SCSI Status: Check Condition > (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 > (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed > (da4:umass-sim1:1:0:0): (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 > 0 0 0 0 0 0 > (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 > (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed > Retrying Command (per Sense Data) > (da4:umass-sim1:1:0:0): Retrying Command > (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da4:umass-sim1:1:0:0): CAM Status: SCSI Status Error > (da4:umass-sim1:1:0:0): SCSI Status: Check Condition > (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 > (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed > (da4:umass-sim1:1:0:0): (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 > 0 0 0 0 0 0 > (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 > (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed > Retrying Command (per Sense Data) > (da4:umass-sim1:1:0:0): Retrying Command > (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da4:umass-sim1:1:0:0): CAM Status: SCSI Status Error > (da4:umass-sim1:1:0:0): SCSI Status: Check Condition > (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 > (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed > (da4:umass-sim1:1:0:0): (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 > 0 0 0 0 0 0 > (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 > (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed > Retrying Command (per Sense Data) > (da4:umass-sim1:1:0:0): Retrying Command > (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da4:umass-sim1:1:0:0): CAM Status: SCSI Status Error > (da4:umass-sim1:1:0:0): SCSI Status: Check Condition > (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 > (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed > (da4:umass-sim1:1:0:0): (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 > 0 0 0 0 0 0 > (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 > (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed > Retrying Command (per Sense Data) > (da4:umass-sim1:1:0:0): Retrying Command > (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da4:umass-sim1:1:0:0): CAM Status: SCSI Status Error > (da4:umass-sim1:1:0:0): SCSI Status: Check Condition > (da4:umass-sim1:1:0:0): NOT READY asc:3a,0 > (da4:umass-sim1:1:0:0): Medium not present > (da4:umass-sim1:1:0:0): (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 > 0 0 0 0 0 0 > (da4:umass-sim1:1:0:0): NOT READY asc:3a,0 > (da4:umass-sim1:1:0:0): Medium not present > Unretryable error > (da4:umass-sim1:1:0:0): error 6 > (da4:umass-sim1:1:0:0): Unretryable Error > Opened disk da4 -> 6 > (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da4:umass-sim1:1:0:0): CAM Status: SCSI Status Error > (da4:umass-sim1:1:0:0): SCSI Status: Check Condition > (da4:umass-sim1:1:0:0): NOT READY asc:3a,0 > (da4:umass-sim1:1:0:0): Medium not present > (da4:umass-sim1:1:0:0): (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 > 0 0 0 0 0 0 > (da4:umass-sim1:1:0:0): NOT READY asc:3a,0 > (da4:umass-sim1:1:0:0): Medium not present > Unretryable error > (da4:umass-sim1:1:0:0): error 6 > (da4:umass-sim1:1:0:0): Unretryable Error > Opened disk da4 -> 6 > Trying to mount root from ufs:/dev/da3s1a > start_init: trying /sbin/init > em0: Link is up 1000 Mbps Full Duplex > em0: Link is up 1000 Mbps Full Duplex > em0: Link is up 1000 Mbps Full Duplex > > > _______________________________________________ cvs-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/cvs-all To unsubscribe, send any mail to "[EMAIL PROTECTED]"