I am relative new to Unix and I have a Dell CP laptop running BSD4.4 with an
Xircom
Credit Card Modem. I was looking at the boot process with regard to the modem:
pccardd[8]:Card "Xircom"("CreditCard Ethernet+Modem II") [CEM2} [1.00] has
function
ID2 sio4 at port 0x2f8-0x2ff iomem 0xd4000-0xd5fff irq 11 slot 1 on pccard1
sio4:
type 16450 sio4: unable to activate interrupt in fast mode pccardd[85]: sio4:
GENERIC
PCMCIA modem inserted pccardd[85]: pccard started
I think for the Ethernet part of the card to work I thought the XE driver. When
I look in the etc/modems configuration data base file, it had the sportster and
it configs, the mt932 and it's configs, and last generic (use defaults).. I
found
these AT commands and configs the the modem but dont know what else need to be
configured
besides this file. EMULATION drivers
;
[Xircom CEM II]
<hwflowcontrol_off>=&K0
<hwflowcontrol_on>=&K3
<protocol_off>=&Q6
<protocol_on>=&Q5
<compression_off>=S46=0
<compression_on>=S46=2
<speaker_off>=M0
<speaker_on>=M1
<autodial_on>=ATDT
<autodial_off>=ATD CALLBACKTIME=10
DEFAULTOFF=compression
MAXCARRIERBPS=19200
MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 X4 S0=0 S2=128 S7=55 S37=17 W2
S95=1<cr>
COMMAND_INIT=AT<protocol><compression><hwflowcontrol><speaker><cr>
COMMAND_DIAL=<autodial><phonenumber><cr>
COMMAND_LISTEN=ATS0=1<cr>
_______________________________________________
CWE-LUG mailing list
[email protected]
http://www.cwelug.org/
http://www.cwelug.org/archives/
http://www.cwelug.org/mailinglist/
