You could try using a different run, http://www.extendingflash.com/utilities/runhide.html provides an application called "runhide" which does a similar job as run. This may solve your problem
mark -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Gottwald Sent: 10 December 2004 10:24 To: [EMAIL PROTECTED] Subject: Re: XDMCP Woes + Solaris On Thu, 9 Dec 2004, Mark Reis wrote: > Hello, > > I've been banging my head up against a wall trying to get XDMCP working > with two solaris machines. > > > Setup: > > Machine 1: Solaris 9 - The 9/02 build - not a lot of patches have been > applied to bring it to the current level. > > Machine 2: Solaris 9 - The 9/04 build - > > > Scenario: > > I attempt to connect to both hosts with the startxdmcp batch file with > the run line: > > run XWin -logverbose 3 -query hostname -nodecoration -lesspointer > > > Results: > > Now here is the part that is baffling. > > Connecting to machine 1 works fine - Connecting to machine 2 fails. > However, Exceed 6.2 is able to connect to both machines just fine. Have you checked the FAQ. There are some scenarios with XDMCP and Solaris resolved. > Additionally - If I remove -nodecoration, Xorg will start, but there is > no display shown. This is a know problem with the run utility. It will hide console window but unfortunatly the main window too. bye ago -- [EMAIL PROTECTED] http://www.gotti.org ICQ: 126018723