Hello again, Well,your are right, I modified the sources to port monit to cygwin, as I did correctly in version 5.10.
Below you will find a quick how-to (and at the end the required diff files). ############################################################## CYGWIN PACKGAGING ############################################################## 0- Install Cygwin via setup-x86_64 or setup-x86 from https://www.cygwin.com 1- The following packages are required from the Cygwin: Devel Tree: make, autoconf,automake,gcc-core,bison,libtool,flex, cygwin32-zlib, zlib-devel Libs Tree: libcrypt-devel Select also all the required dependecies when installing ############################################################## MONIT DOWNLOAD ############################################################## 2- For better success, start cygwin.bat or cygwin Terminal with Administration Elevation Privileges "Run as Administrator": 3- Download monit source from https://mmonit.com/monit/ and copy it to your "cywin forlder"/tmp: $ cd /tmp $ tar xvfz monit-5.25.1.tar.gz $ cd monit-5.25.1 ############################################################## CREATE SYSTEM DEPENDENCIES FILES ############################################################## Copy the Minimal System Dependencies from sysdep_UNKNOWN to the cygwin architecture: cp file /src/device/sysdep_UNKNOWN.c /src/device/sysdep_CYGWIN.c cp file /src/process/sysdep_UNKNOWN.c /src/process/sysdep_CYGWIN.c ############################################################## ADAPT CONIFUGRE.AC TO CYGWIN in # Architecture/OS part of code ############################################################## For configure.ac: ###### CYGWIN ADDED LINES START ##### elif test "${architecture:0:6}" = "CYGWIN" # CYGWIN_NT-6.1 -> CYGWIN (Array slice) then ARCH="CYGWIN" CFLAGS="$CFLAGS -D _REENTRANT" ### LDFLAGS="$LDFLAGS -lcrypt" ### CFLAGS="-E $CFLAGS -D _REENTRANT" ###### CYGWIN ADDED LINES END ###### For libmonit configure.ac: ###### CYGWIN ADDED LINES START ##### elif test "${architecture:0:6}" = "CYGWIN" # CYGWIN_NT-6.1 -> CYGWIN (Array slice) then CFLAGS="$CFLAGS -D _REENTRANT" ### CFLAGS="-E $CFLAGS -D _REENTRANT" AC_DEFINE([CYGWIN], 1, [Define to 1 if the system is CYGWIN]) ###### CYGWIN ADDED LINES END ###### ############################################################## ADAPT MONIT.H ############################################################## In monit.h add: #ifdef CYGWIN #ifndef ICMP_ECHO #define ICMP_ECHO 8 #endif #ifndef ICMP_ECHOREPLY #define ICMP_ECHOREPLY 20 #endif #endif ############################################################## ADAPT NET.C ############################################################## In net.c modify icmp_echo function: #ifdef CYGWIN double icmp_echo(const char *hostname, Socket_Family family, Outgoing_T *outgoing, int size, int timeout, int maxretries) { return -1; } #else double icmp_echo(const char *hostname, Socket_Family family, Outgoing_T *outgoing, int size, int timeout, int maxretries) { ASSERT(hostname); .... ############################################################## COMPILATION ############################################################## $ ./bootstrap && autoreconf -i -f && automake -acf && ./configure --without-pam --without-ssl --without-ipv6 --without-largefiles --without-zlib Success bootstrapping libmonit Success bootstrapping Monit ... +------------------------------------------------------------+ | License: | | This is Open Source Software and use is subject to the GNU | | AFFERO GENERAL PUBLIC LICENSE version 3, available in this | | distribution in the file COPYING. | | | | By continuing this installation process, you are bound by | | the terms of this license agreement. If you do not agree | | with the terms of this license, you must abort the | | installation process at this point. | +------------------------------------------------------------+ | Libmonit is configured as follows: | | | | Optimized: DISABLED | | Profiling: DISABLED | | Compression: DISABLED | +------------------------------------------------------------+ Monit Build Information: Architecture: CYGWIN Compiler flags: -Wno-address -Wno-pointer-sign -g -O2 -Wall -Wunused -Wno-unused-label -funsigned-char -D_GNU_SOURCE -std=c99 -D _REENTRANT Linker flags: -lpthread -lcrypt -lresolv pid file location: /var/run Install directory: /usr/local +------------------------------------------------------------+ | License: | | This is Open Source Software and use is subject to the GNU | | AFFERO GENERAL PUBLIC LICENSE version 3, available in this | | distribution in the file COPYING. | | | | By continuing this installation process, you are bound by | | the terms of this license agreement. If you do not agree | | with the terms of this license, you must abort the | | installation process at this point. | +------------------------------------------------------------+ | Monit has been configured with the following options: | | | | Compression: ENABLED | | PAM support: DISABLED | | SSL support: DISABLED | | Large files support: DISABLED | | IPv6 support: DISABLED | | Optimized: DISABLED | | Profiling: DISABLED | ############################################################################## MAKE MONIT ############################################################################## NOTE: disable your Antivirus Software to successfully run the program !!! NOTE: make clean can help if some compilation has tried and failed $ make clean & make gcc -DHAVE_CONFIG_H -I. -I./src -DCYGWIN -DSYSCONFDIR="\"/usr/local/etc\"" -I./src -I./src/device -I./src/http -I./src/notification -I./src/process -I./src/protocols -I./src/ssl -I./src/terminal -I./libmonit/src -Wno-address -Wno-pointer-sign -g -O2 -Wall -Wunused -Wno-unused-label -funsigned-char -D_GNU_SOURCE -std=c99 -D _REENTRANT -c -o src/y.tab.o src/y.tab.c <command-line>:0:6: error: expected identifier or ‘(’ before numeric constant src/monit.h:647:19: note: in expansion of macro ‘unix’ } unix; ^~~~ <command-line>:0:6: error: expected identifier or ‘(’ before numeric constant src/monit.h:1291:27: note: in expansion of macro ‘unix’ } unix; ^~~~ In file included from src/net.h:30:0, from src/p.y:120: src/monit.h:1292:17: warning: no semicolon at end of struct or union } socket; ^ src/p.y: In function ‘yyparse’: <command-line>:0:6: error: expected identifier before numeric constant src/p.y:1059:42: note: in expansion of macro ‘unix’ Run.httpd.socket.unix.path = $2; ^~~~ <command-line>:0:6: error: expected identifier before numeric constant src/p.y:1069:42: note: in expansion of macro ‘unix’ Run.httpd.socket.unix.uid = get_uid($2, 0); ^~~~ <command-line>:0:6: error: expected identifier before numeric constant src/p.y:1074:42: note: in expansion of macro ‘unix’ Run.httpd.socket.unix.gid = get_gid($2, 0); ^~~~ <command-line>:0:6: error: expected identifier before numeric constant src/p.y:1079:42: note: in expansion of macro ‘unix’ Run.httpd.socket.unix.uid = get_uid(NULL, $2); ^~~~ <command-line>:0:6: error: expected identifier before numeric constant src/p.y:1083:42: note: in expansion of macro ‘unix’ Run.httpd.socket.unix.gid = get_gid(NULL, $2); ^~~~ <command-line>:0:6: error: expected identifier before numeric constant src/p.y:1087:42: note: in expansion of macro ‘unix’ Run.httpd.socket.unix.permission = check_perm($2); ^~~~ <command-line>:0:6: error: expected identifier before numeric constant src/p.y:1477:40: note: in expansion of macro ‘unix’ portset.target.unix.pathname = $2; ^~~~ src/p.y: In function ‘addport’: <command-line>:0:6: error: expected identifier before numeric constant src/p.y:3380:27: note: in expansion of macro ‘unix’ p->target.unix.pathname = port->target.unix.pathname; ^~~~ make[2]: *** [Makefile:752: src/y.tab.o] Error 1 make[2]: Leaving directory '/tmp/monit-5.25.1' make[1]: *** [Makefile:819: all-recursive] Error 1 make[1]: Leaving directory '/tmp/monit-5.25.1' make: *** [Makefile:531: all] Error 2 ############################################################################## DIFF FILES (sources are configure.ac.bck) ############################################################################## diff configure.ac configure.ac.bck 622,634d621 < < < < ###### CYGWIN ADDED LINES START ##### < elif test "${architecture:0:6}" = "CYGWIN" # CYGWIN_NT-6.1 -> CYGWIN (Array slice) < then < ARCH="CYGWIN" < CFLAGS="$CFLAGS -D _REENTRANT" < ### LDFLAGS="$LDFLAGS -lcrypt" < ### CFLAGS="-E $CFLAGS -D _REENTRANT" < ###### CYGWIN ADDED LINES END ###### $ cd libmonit $ diff configure.ac configure.ac.bck 249,260d248 < < < ###### CYGWIN ADDED LINES START ##### < elif test "${architecture:0:6}" = "CYGWIN" # CYGWIN_NT-6.1 -> CYGWIN (Array slice) < then < CFLAGS="$CFLAGS -D _REENTRANT" < ### LDFLAGS="$LDFLAGS -lcrypt" < ### CFLAGS="-E $CFLAGS -D _REENTRANT" < AC_DEFINE([CYGWIN], 1, [Define to 1 if the system is CYGWIN]) < ###### CYGWIN ADDED LINES END ###### < < 262c250 < AC_MSG_ERROR([Architecture not supported: ${architecture}]) --- > AC_MSG_ERROR([Architecture not supported: ${architecture}]) $cd .. $ cd src $ diff monit.h monit.h.bck 26,41d25 < /* CYGWIN */ < #ifdef CYGWIN < < #ifndef ICMP_ECHO < #define ICMP_ECHO 8 < #endif < < #ifndef ICMP_ECHOREPLY < #define ICMP_ECHOREPLY 20 < #endif < < #endif < /* CYGWIN */ < < < $ diff net.c net.c.bck 459,466d458 < /* CYGWIN */ < < #ifdef CYGWIN < double icmp_echo(const char *hostname, Socket_Family family, Outgoing_T *outgoing, int size, int timeout, int maxretries) { < return -1; < } < #else < /* CYGWIN */ 548,550d539 < < < #endif 2018-01-15 15:27 GMT+01:00 Ken Brown <kbr...@cornell.edu>: > On 1/15/2018 7:22 AM, Kizito Porta Balanyà wrote: > >> Hello all, >> >> I'm trying to compile the last version of MONIT and I get some errors that >> I can not solve. >> >> Basically I get errors like: expected identifier or ‘(’ before numeric >> constant, but reviewing the code I don't see any wrong, beside that the >> sources compile correctly with Linux, AIX, etc ... >> >> Can you help me? Do you have any clue? >> >> I show you the errors obtained: >> >> gcc -DHAVE_CONFIG_H -I. -I./src -DCYGWIN >> -DSYSCONFDIR="\"/usr/local/etc\"" -I./src -I./src/device -I./src/http >> -I./src/process -I./src/protocols -I./src/ssl -I./libmonit/src >> -Wno-address -Wno-pointer-sign -g -O2 -Wall -Wunused -Wno-unused-label >> -funsigned-char -D_GNU_SOURCE -std=c99 -D _REENTRANT -c -o src/y.tab.o >> src/y.tab.c >> <command-line>:0:6: error: expected identifier or ‘(’ before numeric >> constant >> src/monit.h:581:19: note: in expansion of macro ‘unix’ >> } unix; >> ^~~~ >> <command-line>:0:6: error: expected identifier or ‘(’ before numeric >> constant >> src/monit.h:1129:27: note: in expansion of macro ‘unix’ >> } unix; >> ^~~~ >> In file included from src/net.h:30:0, >> from src/p.y:116: >> src/monit.h:1130:17: warning: no semicolon at end of struct or union >> } socket; >> ^ >> src/p.y: In function ‘yyparse’: >> <command-line>:0:6: error: expected identifier before numeric constant >> src/p.y:740:42: note: in expansion of macro ‘unix’ >> Run.httpd.socket.unix.path = $4; >> ^~~~ >> <command-line>:0:6: error: expected identifier before numeric constant >> src/p.y:1154:40: note: in expansion of macro ‘unix’ >> portset.target.unix.pathname = $2; >> ^~~~ >> src/p.y: In function ‘addport’: >> <command-line>:0:6: error: expected identifier before numeric constant >> src/p.y:2765:27: note: in expansion of macro ‘unix’ >> p->target.unix.pathname = port->target.unix.pathname; >> > > I tried to reproduce the problem, but I think you must be using different > sources than what I found. I downloaded monit-5.25.1.tar.gz from > https://mmonit.com/monit/ and found that I couldn't configure it: > > $ ./bootstrap > [...] > > $ ./configure --without-pam > [...] > configure: error: Architecture not supported: CYGWIN_NT-10.0-WOW > configure: error: ./configure failed for libmonit > > Also, the line numbers in my sources differ from those in your error > messages. Could you say where you got your sources and how you tried to > build? > > Ken > > -- > Problem reports: http://cygwin.com/problems.html > FAQ: http://cygwin.com/faq/ > Documentation: http://cygwin.com/docs.html > Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple > > -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
