On Mon, Nov 03, 2003 at 10:40:43PM +0100, Corinna Vinschen wrote:
> I'm running a 2003 Server as standalone (non-domain) server. In that
> setting, password complexity is disabled by default, so I missed that one,
> too. Thanks for the heads up. I changed the password to SSHD_server,
> which seem to be fine for the complexity rule.
>
> However, I have still a problem. Does anybody know how I can set
> "Password never expires" from the command line? I know how to do this
> with dsadd, but that only works on domain machines so it's no generic
> solution. If I can't do this in the script, everybody would have to
> set this in the Computer Management Console by hand :-(
I've again attached a new ssh-host-config file for testing. As it turned
out, I mis-tested the password complexity rule. The password SSHD_server
was not sufficient.
The script now calls the passwd utility from the cygwin base package
to set the user flags to "Password never expires". This will only
work with the new passwd from current CVS, version 1.5. The current
version released with Cygwin 1.5.5 is 1.4. Up to 1.4, the passwd tool
has no -e option to set the UF_DONT_EXPIRE_PASSWD flag. ssh-host-config
checks for the version number of the passwd tool and either calls it
or emits an additional warning that the expiry must be checked.
Please give it another try, even if it gets boring.
Thanks in advance,
Corinna
Changes:
- Don't use fixed password for sshd_server account but ask the user
now for a password.
- Extend some warning and info messages.
- Add -c/--cygwin option to allow automating the setting of the
environment variable CYGWIN for the sshd service.
- Add -w/--pwd option to allow automating the password setting
for the sshd_server account.
- Always recreate the sshd_server entry in /etc/passwd to overwrite
weird settings.
- If passwd supports the -e option, use it, otherwise emit warning
message that password expiry of sshd_server account should be
checked.
- A few code cleanups.
--
Corinna Vinschen Please, send mails regarding Cygwin to
Cygwin Developer mailto:[EMAIL PROTECTED]
Red Hat, Inc.
#!/bin/bash
#
# ssh-host-config, Copyright 2000, 2001, 2002, 2003 Red Hat Inc.
#
# This file is part of the Cygwin port of OpenSSH.
# Subdirectory where the new package is being installed
PREFIX=/usr
# Directory where the config files are stored
SYSCONFDIR=/etc
LOCALSTATEDIR=/var
progname=$0
auto_answer=""
port_number=22
privsep_configured=no
privsep_used=yes
sshd_in_passwd=no
sshd_in_sam=no
request()
{
if [ "${auto_answer}" = "yes" ]
then
echo "$1 (yes/no) yes"
return 0
elif [ "${auto_answer}" = "no" ]
then
echo "$1 (yes/no) no"
return 1
fi
answer=""
while [ "X${answer}" != "Xyes" -a "X${answer}" != "Xno" ]
do
echo -n "$1 (yes/no) "
read -e answer
done
if [ "X${answer}" = "Xyes" ]
then
return 0
else
return 1
fi
}
# Check options
while :
do
case $# in
0)
break
;;
esac
option=$1
shift
case "${option}" in
-d | --debug )
set -x
;;
-y | --yes )
auto_answer=yes
;;
-n | --no )
auto_answer=no
;;
-c | --cygwin )
cygwin_value="$1"
shift
;;
-p | --port )
port_number=$1
shift
;;
-w | --pwd )
password_value="$1"
shift
;;
*)
echo "usage: ${progname} [OPTION]..."
echo
echo "This script creates an OpenSSH host configuration."
echo
echo "Options:"
echo " --debug -d Enable shell's debug output."
echo " --yes -y Answer all questions with \"yes\" automatically."
echo " --no -n Answer all questions with \"no\" automatically."
echo " --cygwin -c <options> Use \"options\" as value for CYGWIN environment
var."
echo " --port -p <n> sshd listens on port n."
echo " --pwd -w <passwd> Use \"pwd\" as password for user 'sshd_server'."
echo
exit 1
;;
esac
done
# Check if running on NT
_sys="`uname`"
_nt=`expr "${_sys}" : "CYGWIN_NT"`
# If running on NT, check if running under 2003 Server or later
if [ ${_nt} -gt 0 ]
then
_nt2003=`uname | awk -F- '{print ( $2 >= 5.2 ) ? 1 : 0;}'`
fi
# Check for running ssh/sshd processes first. Refuse to do anything while
# some ssh processes are still running
if ps -ef | grep -v grep | grep -q ssh
then
echo
echo "There are still ssh processes running. Please shut them down first."
echo
exit 1
fi
# Check for ${SYSCONFDIR} directory
if [ -e "${SYSCONFDIR}" -a ! -d "${SYSCONFDIR}" ]
then
echo
echo "${SYSCONFDIR} is existant but not a directory."
echo "Cannot create global configuration files."
echo
exit 1
fi
# Create it if necessary
if [ ! -e "${SYSCONFDIR}" ]
then
mkdir "${SYSCONFDIR}"
if [ ! -e "${SYSCONFDIR}" ]
then
echo
echo "Creating ${SYSCONFDIR} directory failed"
echo
exit 1
fi
fi
# Create /var/log and /var/log/lastlog if not already existing
if [ -f ${LOCALSTATEDIR}/log ]
then
echo "Creating ${LOCALSTATEDIR}/log failed!"
else
if [ ! -d ${LOCALSTATEDIR}/log ]
then
mkdir -p ${LOCALSTATEDIR}/log
fi
if [ -d ${LOCALSTATEDIR}/log/lastlog ]
then
chmod 777 ${LOCALSTATEDIR}/log/lastlog
elif [ ! -f ${LOCALSTATEDIR}/log/lastlog ]
then
cat /dev/null > ${LOCALSTATEDIR}/log/lastlog
chmod 666 ${LOCALSTATEDIR}/log/lastlog
fi
fi
# Create /var/empty file used as chroot jail for privilege separation
if [ -f ${LOCALSTATEDIR}/empty ]
then
echo "Creating ${LOCALSTATEDIR}/empty failed!"
else
mkdir -p ${LOCALSTATEDIR}/empty
if [ ${_nt} -gt 0 ]
then
chmod 755 ${LOCALSTATEDIR}/empty
fi
fi
# First generate host keys if not already existing
if [ ! -f "${SYSCONFDIR}/ssh_host_key" ]
then
echo "Generating ${SYSCONFDIR}/ssh_host_key"
ssh-keygen -t rsa1 -f ${SYSCONFDIR}/ssh_host_key -N '' > /dev/null
fi
if [ ! -f "${SYSCONFDIR}/ssh_host_rsa_key" ]
then
echo "Generating ${SYSCONFDIR}/ssh_host_rsa_key"
ssh-keygen -t rsa -f ${SYSCONFDIR}/ssh_host_rsa_key -N '' > /dev/null
fi
if [ ! -f "${SYSCONFDIR}/ssh_host_dsa_key" ]
then
echo "Generating ${SYSCONFDIR}/ssh_host_dsa_key"
ssh-keygen -t dsa -f ${SYSCONFDIR}/ssh_host_dsa_key -N '' > /dev/null
fi
# Check if ssh_config exists. If yes, ask for overwriting
if [ -f "${SYSCONFDIR}/ssh_config" ]
then
if request "Overwrite existing ${SYSCONFDIR}/ssh_config file?"
then
rm -f "${SYSCONFDIR}/ssh_config"
if [ -f "${SYSCONFDIR}/ssh_config" ]
then
echo "Can't overwrite. ${SYSCONFDIR}/ssh_config is write protected."
fi
fi
fi
# Create default ssh_config from skeleton file in /etc/defaults/etc
if [ ! -f "${SYSCONFDIR}/ssh_config" ]
then
echo "Generating ${SYSCONFDIR}/ssh_config file"
cp ${SYSCONFDIR}/defaults/etc/ssh_config ${SYSCONFDIR}/ssh_config
if [ "${port_number}" != "22" ]
then
echo "Host localhost" >> ${SYSCONFDIR}/ssh_config
echo " Port ${port_number}" >> ${SYSCONFDIR}/ssh_config
fi
fi
# Check if sshd_config exists. If yes, ask for overwriting
if [ -f "${SYSCONFDIR}/sshd_config" ]
then
if request "Overwrite existing ${SYSCONFDIR}/sshd_config file?"
then
rm -f "${SYSCONFDIR}/sshd_config"
if [ -f "${SYSCONFDIR}/sshd_config" ]
then
echo "Can't overwrite. ${SYSCONFDIR}/sshd_config is write protected."
fi
else
grep -q UsePrivilegeSeparation ${SYSCONFDIR}/sshd_config && privsep_configured=yes
fi
fi
# Prior to creating or modifying sshd_config, care for privilege separation
if [ "${privsep_configured}" != "yes" ]
then
if [ ${_nt} -gt 0 ]
then
echo "Privilege separation is set to yes by default since OpenSSH 3.3."
echo "However, this requires a non-privileged account called 'sshd'."
echo "For more info on privilege separation read
/usr/share/doc/openssh/README.privsep."
echo
if request "Should privilege separation be used?"
then
privsep_used=yes
grep -q '^sshd:' ${SYSCONFDIR}/passwd && sshd_in_passwd=yes
net user sshd >/dev/null 2>&1 && sshd_in_sam=yes
if [ "${sshd_in_passwd}" != "yes" ]
then
if [ "${sshd_in_sam}" != "yes" ]
then
echo "Warning: The following function requires administrator privileges!"
if request "Should this script create a local user 'sshd' on this machine?"
then
dos_var_empty=`cygpath -w ${LOCALSTATEDIR}/empty`
net user sshd /add /fullname:"sshd privsep" "/homedir:${dos_var_empty}"
/active:no > /dev/null 2>&1 && sshd_in_sam=yes
if [ "${sshd_in_sam}" != "yes" ]
then
echo "Warning: Creating the user 'sshd' failed!"
fi
fi
fi
if [ "${sshd_in_sam}" != "yes" ]
then
echo "Warning: Can't create user 'sshd' in ${SYSCONFDIR}/passwd!"
echo " Privilege separation set to 'no' again!"
echo " Check your ${SYSCONFDIR}/sshd_config file!"
privsep_used=no
else
mkpasswd -l -u sshd | sed -e 's/bash$/false/' >> ${SYSCONFDIR}/passwd
fi
fi
else
privsep_used=no
fi
else
# On 9x don't use privilege separation. Since security isn't
# available it just adds useless additional processes.
privsep_used=no
fi
fi
# Create default sshd_config from skeleton files in /etc/defaults/etc or
# modify to add the missing privsep configuration option
if [ ! -f "${SYSCONFDIR}/sshd_config" ]
then
echo "Generating ${SYSCONFDIR}/sshd_config file"
sed -e "s/^#UsePrivilegeSeparation yes/UsePrivilegeSeparation ${privsep_used}/
s/^#Port 22/Port ${port_number}/
s/^#StrictModes yes/StrictModes no/" \
< ${SYSCONFDIR}/defaults/etc/sshd_config \
> ${SYSCONFDIR}/sshd_config
elif [ "${privsep_configured}" != "yes" ]
then
echo >> ${SYSCONFDIR}/sshd_config
echo "UsePrivilegeSeparation ${privsep_used}" >> ${SYSCONFDIR}/sshd_config
fi
# Care for services file
_my_etcdir="/ssh-host-config.$$"
if [ ${_nt} -gt 0 ]
then
_win_etcdir="${SYSTEMROOT}\\system32\\drivers\\etc"
_services="${_my_etcdir}/services"
# On NT, 27 spaces, no space after the hash
_spaces=" #"
else
_win_etcdir="${WINDIR}"
_services="${_my_etcdir}/SERVICES"
# On 9x, 18 spaces (95 is very touchy), a space after the hash
_spaces=" # "
fi
_serv_tmp="${_my_etcdir}/srv.out.$$"
mount -t -f "${_win_etcdir}" "${_my_etcdir}"
# Depends on the above mount
_wservices=`cygpath -w "${_services}"`
# Remove sshd 22/port from services
if [ `grep -q 'sshd[ \t][ \t]*22' "${_services}"; echo $?` -eq 0 ]
then
grep -v 'sshd[ \t][ \t]*22' "${_services}" > "${_serv_tmp}"
if [ -f "${_serv_tmp}" ]
then
if mv "${_serv_tmp}" "${_services}"
then
echo "Removing sshd from ${_wservices}"
else
echo "Removing sshd from ${_wservices} failed!"
fi
rm -f "${_serv_tmp}"
else
echo "Removing sshd from ${_wservices} failed!"
fi
fi
# Add ssh 22/tcp and ssh 22/udp to services
if [ `grep -q 'ssh[ \t][ \t]*22' "${_services}"; echo $?` -ne 0 ]
then
if awk '{ if ( $2 ~ /^23\/tcp/ ) print "ssh 22/tcp'"${_spaces}"'SSH
Remote Login Protocol\nssh 22/udp'"${_spaces}"'SSH Remote Login
Protocol"; print $0; }' < "${_services}" > "${_serv_tmp}"
then
if mv "${_serv_tmp}" "${_services}"
then
echo "Added ssh to ${_wservices}"
else
echo "Adding ssh to ${_wservices} failed!"
fi
rm -f "${_serv_tmp}"
else
echo "WARNING: Adding ssh to ${_wservices} failed!"
fi
fi
umount "${_my_etcdir}"
# Care for inetd.conf file
_inetcnf="${SYSCONFDIR}/inetd.conf"
_inetcnf_tmp="${SYSCONFDIR}/inetd.conf.$$"
if [ -f "${_inetcnf}" ]
then
# Check if ssh service is already in use as sshd
with_comment=1
grep -q '^[ \t]*sshd' "${_inetcnf}" && with_comment=0
# Remove sshd line from inetd.conf
if [ `grep -q '^[# \t]*sshd' "${_inetcnf}"; echo $?` -eq 0 ]
then
grep -v '^[# \t]*sshd' "${_inetcnf}" >> "${_inetcnf_tmp}"
if [ -f "${_inetcnf_tmp}" ]
then
if mv "${_inetcnf_tmp}" "${_inetcnf}"
then
echo "Removed sshd from ${_inetcnf}"
else
echo "Removing sshd from ${_inetcnf} failed!"
fi
rm -f "${_inetcnf_tmp}"
else
echo "Removing sshd from ${_inetcnf} failed!"
fi
fi
# Add ssh line to inetd.conf
if [ `grep -q '^[# \t]*ssh' "${_inetcnf}"; echo $?` -ne 0 ]
then
if [ "${with_comment}" -eq 0 ]
then
echo 'ssh stream tcp nowait root /usr/sbin/sshd sshd -i' >>
"${_inetcnf}"
else
echo '# ssh stream tcp nowait root /usr/sbin/sshd sshd -i' >>
"${_inetcnf}"
fi
echo "Added ssh to ${_inetcnf}"
fi
fi
# On NT ask if sshd should be installed as service
if [ ${_nt} -gt 0 ]
then
# But only if it is not already installed
if ! cygrunsrv -Q sshd > /dev/null 2>&1
then
echo
echo
echo "Warning: The following functions require administrator privileges!"
echo
echo "Do you want to install sshd as service?"
if request "(Say \"no\" if it's already installed as service)"
then
if [ $_nt2003 -gt 0 ]
then
grep -q '^sshd_server:' ${SYSCONFDIR}/passwd && sshd_server_in_passwd=yes
if [ "${sshd_server_in_passwd}" = "yes" ]
then
# Drop sshd_server from passwd since it could have wrong settings
grep -v '^sshd_server:' ${SYSCONFDIR}/passwd > ${SYSCONFDIR}/passwd.$$
rm -f ${SYSCONFDIR}/passwd
mv ${SYSCONFDIR}/passwd.$$ ${SYSCONFDIR}/passwd
chmod g-w,o-w ${SYSCONFDIR}/passwd
fi
net user sshd_server >/dev/null 2>&1 && sshd_server_in_sam=yes
if [ "${sshd_server_in_sam}" != "yes" ]
then
echo
echo "You appear to be running Windows 2003 Server or later. On 2003 and"
echo "later systems, it's not possible to use the LocalSystem account"
echo "if sshd should allow passwordless logon (e. g. public key
authentication)."
echo "If you want to enable that functionality, it's required to create a
new"
echo "account 'sshd_server' with special privileges, which is then used to
run"
echo "the sshd service under."
echo
echo "Should this script create a new local account 'sshd_server' which has"
if request "the required privileges?"
then
_admingroup=`awk -F: '{if ( $2 == "S-1-5-32-544" ) print $1;}'
${SYSCONFDIR}/group`
if [ -z "${_admingroup}" ]
then
echo "There's no group with SID S-1-5-32-544 (Local administrators
group) in"
echo "your ${SYSCONFDIR}/group file. Please regenerate this entry using
'mkgroup -l'"
echo "and restart this script."
exit 1
fi
dos_var_empty=`cygpath -w ${LOCALSTATEDIR}/empty`
while [ "${sshd_server_in_sam}" != "yes" ]
do
if [ -n "${password_value}" ]
then
_password="${password_value}"
# Allow to ask for password if first try fails
password_value=""
else
echo
echo "Please enter a password for new user 'sshd_server'. Please be
sure that"
echo "this password matches the password rules given on your system."
echo -n "Entering no password will exit the configuration. PASSWORD="
read -e _password
if [ -z "${_password}" ]
then
echo
echo "Exiting configuration. No user sshd_server has been created,"
echo "no sshd service installed."
exit 1
fi
fi
net user sshd_server "${_password}" /add /fullname:"sshd server account"
"/homedir:${dos_var_empty}" /yes > /tmp/nu.$$ 2>&1 && sshd_server_in_sam=yes
if [ "${sshd_server_in_sam}" != "yes" ]
then
echo "Creating the user 'sshd_server' failed! Reason:"
cat /tmp/nu.$$
rm /tmp/nu.$$
fi
done
net localgroup "${_admingroup}" sshd_server /add > /dev/null 2>&1 &&
sshd_server_in_admingroup=yes
if [ "${sshd_server_in_admingroup}" != "yes" ]
then
echo "WARNING: Adding user sshd_server to local group ${_admingroup}
failed!"
echo "Please add sshd_server to local group ${_admingroup} before"
echo "starting the sshd service!"
echo
fi
passwd_has_expiry_flags=`passwd -v | awk '/^passwd /{print ( $3 >= 1.5 ) ?
"yes" : "no";}'`
if [ "${passwd_has_expiry_flags}" != "yes" ]
then
echo
echo "WARNING: User sshd_server has password expiry set to system
default."
echo "Please check that password never expires or set it to your needs."
elif ! passwd -e sshd_server
then
echo
echo "WARNING: Setting password expiry for user sshd_server failed!"
echo "Please check that password never expires or set it to your needs."
fi
editrights -a SeAssignPrimaryTokenPrivilege -u sshd_server &&
editrights -a SeCreateTokenPrivilege -u sshd_server &&
editrights -a SeDenyInteractiveLogonRight -u sshd_server &&
editrights -a SeDenyNetworkLogonRight -u sshd_server &&
editrights -a SeDenyRemoteInteractiveLogonRight -u sshd_server &&
editrights -a SeIncreaseQuotaPrivilege -u sshd_server &&
editrights -a SeServiceLogonRight -u sshd_server &&
sshd_server_got_all_rights="yes"
if [ "${sshd_server_got_all_rights}" != "yes" ]
then
echo
echo "Assigning the appropriate privileges to user 'sshd_server' failed!"
echo "Can't create sshd service!"
exit 1
fi
echo
echo "User 'sshd_server' has been created with password '${_password}'."
echo "If you change the password, please keep in mind to change the
password"
echo "for the sshd service, too."
echo
echo "Also keep in mind that the user sshd_server needs read permissions
on all"
echo "users' .ssh/authorized_keys file to allow public key authentication
for"
echo "these users!. (Re-)running ssh-user-config for each user will set
the"
echo "required permissions correctly."
echo
fi
fi
if [ "${sshd_server_in_sam}" = "yes" ]
then
mkpasswd -l -u sshd_server | sed -e 's/bash$/false/' >> ${SYSCONFDIR}/passwd
fi
fi
if [ -n "${cygwin_value}" ]
then
_cygwin="${cygwin_value}"
else
echo
echo "Which value should the environment variable CYGWIN have when"
echo "sshd starts? It's recommended to set at least \"ntsec\" to be"
echo "able to change user context without password."
echo -n "Default is \"ntsec\". CYGWIN="
read -e _cygwin
fi
[ -z "${_cygwin}" ] && _cygwin="ntsec"
if [ $_nt2003 -gt 0 -a "${sshd_server_in_sam}" = "yes" ]
then
if cygrunsrv -I sshd -d "CYGWIN sshd" -p /usr/sbin/sshd -a -D -u sshd_server
-w "${_password}" -e "CYGWIN=${_cygwin}"
then
echo
echo "The service has been installed under sshd_server account."
echo "To start the service, call \`net start sshd' or \`cygrunsrv -S sshd'."
fi
else
if cygrunsrv -I sshd -d "CYGWIN sshd" -p /usr/sbin/sshd -a -D -e
"CYGWIN=${_cygwin}"
then
echo
echo "The service has been installed under LocalSystem account."
echo "To start the service, call \`net start sshd' or \`cygrunsrv -S sshd'."
fi
fi
fi
# Now check if sshd has been successfully installed. This allows to
# set the ownership of the affected files correctly.
if cygrunsrv -Q sshd > /dev/null 2>&1
then
if [ $_nt2003 -gt 0 -a "${sshd_server_in_sam}" = "yes" ]
then
_user="sshd_server"
else
_user="system"
fi
chown "${_user}" ${SYSCONFDIR}/ssh*
chown "${_user}".544 ${LOCALSTATEDIR}/empty
if [ -f ${LOCALSTATEDIR}/log/sshd.log ]
then
chown "${_user}".544 ${LOCALSTATEDIR}/log/sshd.log
fi
fi
fi
fi
echo
echo "Host configuration finished. Have fun!"
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
