Re: Smoke [5.9.2] 24010 FAIL(m) linux 2.6.10-1.770_FC3 [fedora] (i686/1 cpu)

[Jim Cromie]

[EMAIL PROTECTED] wrote:
Automated smoke report for 5.9.2 patch 24010
kirk.peters.homeunix.org: Intel(R) Celeron(R) CPU 2.00GHz (GenuineIntel 
1994MHz) (i686/1 cpu)
   on        linux - 2.6.10-1.770_FC3 [fedora]
   using     cc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)
   smoketime 5 hours 5 minutes (average 19 minutes 7 seconds)
Summary: FAIL(m)
O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep
  24010     Configuration (common) none
----------- ---------------------------------------------------------
O O O O O O 
O O O O O O -Duse64bitint
O O O O O O -Duselongdouble
O O O O O O -Dusemorebits
m - - m - - -Duseithreads
m - - m - - -Duseithreads -Duse64bitint
m - - m - - -Duseithreads -Duselongdouble
m - - m - - -Duseithreads -Dusemorebits
| | | | | +- LC_ALL = en_US.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +----- PERLIO = stdio  -DDEBUGGING
| | +------- LC_ALL = en_US.utf8
| +--------- PERLIO = perlio
+----------- PERLIO = stdio

 

I too started seeing compile failures on my FC-3 machine, in pp_sys.c,
after a resync, remake.  This was roughly coincident with the start of 
your fail reports.

I 'fixed' it here by redoing configure, with all the reentrant functions 
*_r disabled.
Ive been meaning to try a few combos, and send a patch to 
hints/linux.sh, but other things interceded,
and it could be a deeper problem anyway.

hth.