Am Sat, 4 Jan 2020 13:02:50 +0100 schrieb Аl Воgnеr <darktable...@corr.eu.org>:
To make it easier, we should go in the discussion with exiv2 0.27.2 available. So can you help me please to setup a config file for this Pentax-D FA 24-70mm? I am confused too, when I check the output of a Ricoh GRIII, which works now with the discussed lens profile of another thread: 0xa432 Photo LensSpecification Rational 4 1040/100 3710/100 18/10 49/10 So there is nothing in the exiv2 query which is related to Ricoh, but it works. So do I have to define 0x003f and 0x0207 in a certain way, where the word Pentax is not needed necessarily? Al > Am Fri, 3 Jan 2020 23:13:08 +0100 > schrieb Аl Воgnеr <darktable...@corr.eu.org>: > > I answer your question by pasting from the archive, the mail didn't > reach me until now. mabye it will arrive later as with other mails: > > > what does "exiv2 doesn't recognize the lens" mean?. What is > > the output of: > > exiv2 -pv --grep lens/i image.jpg > > This from another experimental pc using exiv2 0.27.2: > > 0x003f PentaxDng LensType Byte 4 8 62 0 > 0 0x0207 PentaxDng LensInfo Undefined 128 0 168 > 224 80 0 62 2 30 3 0 6 0 0 0 0 0 40 86 44 0 197 131 155 32 113 104 104 > 44 2 178 107 251 255 255 255 62 33 165 132 150 32 151 101 0 0 0 0 0 > 207 212 62 120 0 164 0 16 127 12 0 185 1 0 0 0 2 160 6 20 192 31 223 > 213 209 18 125 64 0 0 0 3 136 136 152 234 41 38 136 101 58 96 246 0 0 > 0 144 112 0 12 231 23 195 30 106 88 51 11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 > > > Did you add an entry for your lens in .exiv2 as described in the man > page of exiv2? > > No, because this doesn't work with the exiv2-version of Ubuntu 19.10. > Eoan uses evix2 0.25 > > Al > > > > > From /var/lib/lensfun-updates/version_2/slr-pentax.xml > > > > <lens> > > <!-- This lens is optically identical to the Tamron SP > > 24-70mm f/2.8 Di VC USD. --> > > <maker>Pentax</maker> > > <model>HD Pentax-D FA 24-70mm f/2.8 ED SDM WR</model> > > <mount>Pentax KAF3</mount> > > <cropfactor>1</cropfactor> > > <calibration> > > > > I had this lens with Ubuntu 18.04 working already with a file in > > /.local/share/lensfun The old file doesn't work in Ubuntu 19.10 > > anymore, I mean it is not recognized automatically. It works when I > > assign the lens manually. The lens is shown 2 times in darktable. > > (HD Pentax vs. HD PENTAX and f2.8 vs f/2.8. In earlier discussion > > I've been told, that this shouldn't matter. I am very unsure, if > > this is true with Ubuntu-versions, because I got some lenses > > working with 18.04 adding a 2nd name with things like "/", > > > > With a Ricoh fixed lens (GR III), it was said, that the "mount" has > > to begin with a lowercase letter, which isn't the case here. > > > > > > My version is at /.local/share/lensfun > > > > <lensdatabase> > > > > <lens> > > <maker>Pentax</maker> > > <model>HD PENTAX-D FA 24-70mm F2.8 ED SDM WR</model> > > <mount>Pentax KAF3</mount> > > <cropfactor>1</cropfactor> > > <calibration> > > > > [MakerNotes] 0x0001 Lens Type : > > HD PENTAX-D FA 24-70mm F2.8 ED SDM WR > > > > exiv2 doesn't recognize the lens with Ubuntu 19.10, but I do not > > understand while it worked already with 18.04 > > > > Al > > ____________________________________________________________________________ > > darktable user mailing list > > to unsubscribe send a mail to > > darktable-user+unsubscr...@lists.darktable.org > > > > ____________________________________________________________________________ > darktable user mailing list > to unsubscribe send a mail to > darktable-user+unsubscr...@lists.darktable.org > ____________________________________________________________________________ darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
