Thanks Rob ... it was just that easy. I switched to a USB-2 port and everything worked just fine.
David On 13-04-07 12:05 PM, Rob Z. Smith wrote: > Are you using USB 3 or 2? I've seen similar error reports elsewhere (non dt) > where the only solution was to switch to a USB 2 port (if one was available). > > Rob. > > -----Original Message----- > From: David Vincent-Jones [mailto:[email protected]] > Sent: 07 April 2013 10:48 > To: [email protected] > Subject: Re: [Darktable-users] Camera not recognized > > This appears to address the same problem that I questioned a few days ago. > > I have turned off all automatic mounting of external devices and the > following displays in the terminal: > david@david-T400:~$ darktable -d camctl > [camera_control] creating new context 23fa980 [camera_control] loaded 1451 > camera drivers. > [camera_control] loaded 41 port drivers. > [camera_control] 1 cameras connected > [camera_control] gphoto2 error: PTP I/O error [camera_control] failed to > initialize camera Canon EOS 50D on port > usb:003,003 > [camera_control] failed to initialize device Canon EOS 50D on port > usb:003,003, probably causes are: locked by another application, no access to > udev etc. > [camera_control] registering listener 44b4340 > > Ideas to solve this would be appreciated. This really is a nuisance. > Darktable crashes if I try to remove the camera even with the camera turned > off. > > David > On 13-04-07 12:38 AM, Pascal de Bruijn wrote: >> On Sun, Apr 7, 2013 at 12:16 AM, Georg Trentmann <[email protected] >> <mailto:[email protected]>> wrote: >> >> Hi, >> reading some pleasant articles about Darktable has be the reason >> for me to hunt for an laptop in the bay and give Linux a trial >> again. Last time (about 15 years ago) I used Suse. Now I decided >> for the newest Mint with Cinnamon desktop. >> >> I installed Darktable 1.14 by using the ppa's. >> >> Now I'm very sorry to bother you with an issue I can't get solved >> with my small knowledge: >> >> The camera is not recognized... >> >> I started Darktable with command line parameter '-d camctl' and >> found the following lines in the Log: >> >> [camera_control] 1 cameras connected >> [camera_control] failed to initialize camera Nikon DSC D700 >> (PTP mode) on port usb:001,004 >> [camera_control] failed to initialize device Nikon DSC D700 >> (PTP mode) on port usb:001,004, probably causes are: locked by >> another application, no access to udev etc. >> >> Does anybody know what to do to get it running? >> >> >> This is just a guess, but your desktop environment probably has the >> camera mounted or something. Try unmounting it first... >> >> Regards, >> Pascal de Bruijn >> >> >> >> ---------------------------------------------------------------------- >> -------- Minimize network downtime and maximize team effectiveness. >> Reduce network management and security costs.Learn how to hire the >> most talented Cisco Certified professionals. Visit the Employer >> Resources Portal >> http://www.cisco.com/web/learning/employer_resources/index.html >> >> >> _______________________________________________ >> Darktable-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/darktable-users > > ------------------------------------------------------------------------------ > Minimize network downtime and maximize team effectiveness. > Reduce network management and security costs.Learn how to hire the most > talented Cisco Certified professionals. Visit the Employer Resources Portal > http://www.cisco.com/web/learning/employer_resources/index.html > _______________________________________________ > Darktable-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/darktable-users > > The content of this email is private and confidential, and unless otherwise > stated only the intended recipient may use the content of this email for its > intended purpose. If you are not the intended recipient, you may not retain, > copy, forward or disclose the information herein, and we ask you to notify > the sender or contact our Customer Services department on 0844 633 1000 or at > [email protected] The copyright and all other intellectual property rights > subsisting in or to the contents of this email belong to NHBC or are used > with the permission of the owner and all such rights are reserved. Recipients > are asked to note that opinions, conclusions and other information in the > contents of this email that do not relate to the official business of NHBC > are neither given nor endorsed by NHBC. This email has been scanned for > viruses, but NHBC does not accept any liability in respect of loss or damage > caused by any virus which is not detected by its virus detection systems. > Data Protection Act 1998. NHBC is the Data Controller for the purposes of the > Act. Your personal details will be stored and processed in accordance with > the Act for the purposes of dealing with your enquiry or claim and for > research and statistical purposes. If you make a claim under a Buildmark > policy you agree to your data being passed to others involved with your claim > such as the original builder, or a consultant or remedial works contractor > that we may employ in connection with your claim(s) and matter ancillary to > your claim(s). Other than disclosure provided for in this statement, we will > not pass any data about you to any other party without your permission unless > we are required to do so by law. NHBC, the National House-Building Council, > is a company registered by guarantee in England, registration number 320784, > and it is authorised and regulated by the Financial Services Authority. ------------------------------------------------------------------------------ Minimize network downtime and maximize team effectiveness. Reduce network management and security costs.Learn how to hire the most talented Cisco Certified professionals. Visit the Employer Resources Portal http://www.cisco.com/web/learning/employer_resources/index.html _______________________________________________ Darktable-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/darktable-users
