Dirk,
i am facing booting issue on 2.6.23-rc4-davinci, which is similar to this
post
http://linux.omap.com/pipermail/davinci-linux-open-source/2007-September/004187.html

anyway, i have attached the log for your reference.

Uncompressing
Linux..............................................................................................................
done, boot.
<5>Linux version 2.6.23-rc4-davinci1 ([EMAIL PROTECTED]) (gcc
version 3.4.3 (MontaVista 3.4.3-25.0.30.0501131 2005-07-23)) #2 Wed O7
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: DaVinci EVM
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 30720
<7>  DMA zone: 240 pages used for memmap
<7>  DMA zone: 0 pages reserved
<7>  DMA zone: 30480 pages, LIFO batch:7
<7>  Normal zone: 0 pages used for memmap
<7>  Movable zone: 0 pages used for memmap
DaVinci DM6446 variant 0x0
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
Built 1 zonelists in Zone order.  Total pages: 30480
<5>Kernel command line: console=ttyS0,115200n8 root=/dev/nfs rw noinitrd
ip=dhcp nfsroot=192.168.1.51:/filesys mem=120M video=dm64xxfb:outpul
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
<6>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Memory: 120MB = 120MB total
<5>Memory: 118144KB available (3132K code, 277K data, 136K init)
<7>Calibrating delay loop... 141.31 BogoMIPS (lpj=706560)
Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>NET: Registered protocol family 16
<4>WARNING: both IDE and NOR flash are enabled, but share pins.
         Disable IDE for NOR support.
<6>DaVinci: 71 gpio irqs
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>musb_hdrc: version 6.0, cppi-dma, peripheral, debug=0
<1>Unable to handle kernel NULL pointer dereference at virtual address
00000045
<1>pgd = c0004000
<1>[00000045] *pgd=00000000
Internal error: Oops: 805 [#1]
Modules linked in:
CPU: 0    Not tainted  (2.6.23-rc4-davinci1 #2)
PC is at cppi_controller_start+0x18/0x140
LR is at musb_probe+0x1f4/0x824
pc : [<c001d378>]    lr : [<c001c988>]    psr: a0000013
sp : c04abd9c  ip : c04abdc0  fp : c04abdbc
r10: 00000000  r9 : c0024860  r8 : c033ef78
r7 : c0353cc4  r6 : 00000000  r5 : 00000000  r4 : 00000000
r3 : c048d400  r2 : 00000000  r1 : c048d400  r0 : 00000000
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 0005317f  Table: 80004000  DAC: 00000017
Process swapper (pid: 1, stack limit = 0xc04aa258)
Stack: (0xc04abd9c to 0xc04ac000)
bd80:                                                                00000000
bda0: c033f0e0 c04a7000 c0353cc4 c033ef78 c04abe84 c04abdc0 c001c988 c001d370
bdc0: c04abe14 c04abdd0 c0134468 c0133b7c c8000000 0000000c c00bcec4 c048fb64
bde0: c048fb64 c0316ed4 00000000 c04abe0c c04abdfc c009472c c00946a4 c0493e00
be00: c04abe2c c04abe10 c0094804 c04abe44 c04abe1c c00bd0b8 c028e834 c048fb64
be20: c04abe44 c04abe30 c04abe48 00000000 c0503e08 c048fb64 c04abe78 c04abe48
be40: c00be360 c00bd0ac c048fb64 00000000 00000000 00000001 c033efe0 c033ef78
be60: 00000000 c0353cc4 c0353cc4 c0374094 c0024860 00000000 c04abe94 c04abe88
be80: c017330c c001c7a4 c04abeb8 c04abe98 c01713e4 c01732fc c033f038 c033ef78
bea0: c017154c c0353cc4 c00232e4 c04abed0 c04abebc c01715d0 c0171314 00000000
bec0: c04abed4 c04abefc c04abed4 c01703f4 c017155c c034dc64 c034dc64 c033efc0
bee0: 00000000 c0353cc4 c0353ccc c034db78 c04abf0c c04abf00 c0171650 c01703b8
bf00: c04abf34 c04abf10 c0170bb0 c0171640 c0353cc4 00000000 00000000 c04aa000
bf20: c00232e4 00000000 c04abf48 c04abf38 c0171ac8 c0170b50 c0353ca8 c04abf58
bf40: c04abf4c c0173420 c0171a58 c04abf70 c04abf5c c017346c c01733c4 00000000
bf60: 00000000 c04abf80 c04abf74 c001cfe0 c0173464 c04abff4 c04abf84 c0008c3c
bf80: c001cfc8 65722064 65686361 00000000 00000001 73754220 00000000 00000000
bfa0: 00000000 c04abfb0 c002ae44 c0038f64 00000000 00000000 c0008b6c c003f19c
bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfe0: 00000000 00000000 00000000 c04abff8 c003f19c c0008b7c 3e2d7326 6f6c5f73
Backtrace:
[<c001d360>] (cppi_controller_start+0x0/0x140) from [<c001c988>]
(musb_probe+0x1f4/0x824)
 r8:c033ef78 r7:c0353cc4 r6:c04a7000 r5:c033f0e0 r4:00000000
[<c001c794>] (musb_probe+0x0/0x824) from [<c017330c>]
(platform_drv_probe+0x20/0x24)
[<c01732ec>] (platform_drv_probe+0x0/0x24) from [<c01713e4>]
(driver_probe_device+0xe0/0x188)
[<c0171304>] (driver_probe_device+0x0/0x188) from [<c01715d0>]
(__driver_attach+0x84/0xe4)
 r8:c00232e4 r7:c0353cc4 r6:c017154c r5:c033ef78 r4:c033f038
[<c017154c>] (__driver_attach+0x0/0xe4) from [<c01703f4>]
(bus_for_each_dev+0x4c/0x80)
 r5:c04abed4 r4:00000000
[<c01703a8>] (bus_for_each_dev+0x0/0x80) from [<c0171650>]
(driver_attach+0x20/0x28)
 r7:c034db78 r6:c0353ccc r5:c0353cc4 r4:00000000
[<c0171630>] (driver_attach+0x0/0x28) from [<c0170bb0>]
(bus_add_driver+0x70/0x1b8)
[<c0170b40>] (bus_add_driver+0x0/0x1b8) from [<c0171ac8>]
(driver_register+0x80/0x88)
[<c0171a48>] (driver_register+0x0/0x88) from [<c0173420>]
(platform_driver_register+0x6c/0x88)
 r4:c0353ca8
[<c01733b4>] (platform_driver_register+0x0/0x88) from [<c017346c>]
(platform_driver_probe+0x18/0x68)
[<c0173454>] (platform_driver_probe+0x0/0x68) from [<c001cfe0>]
(musb_init+0x28/0x3c)
 r5:00000000 r4:00000000
[<c001cfb8>] (musb_init+0x0/0x3c) from [<c0008c3c>] (kernel_init+0xd0/0x28c)
[<c0008b6c>] (kernel_init+0x0/0x28c) from [<c003f19c>] (do_exit+0x0/0x794)
Code: e24cb004 e3a05000 e1a06000 e1a02000 (e5c25045)
<0>Kernel panic - not syncing: Attempted to kill init!


get me some idea to fix this issue

Ashok


_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to