Hi! Patrick, For DVEVM there are different versions for u-boot available. u-boot-594-nor_s3_4_fix.bin, u-boot-567-nor_s3_4_fix.bin which is for 594MHz and 567MHz respectively. I think you can trust your u-boot print. These binaries are available for download from TI website.
Thanks 'n' regards, Renjith Thomas > > Can anybody tell me at what rate the DSP clock is running on the > DVEVM? I suspect it is running at 594MHz because > > a) The part is spec'd to run at 594 MHz and TI would want to showcase that > b) u-boot reports that the ARM is running at 297 MHz when it boots > > However > a) u-boot could be just telling the world whatever it was told to tell the > world > b) the "all.tcf" file in the servers/all_codecs (in the codec engine > distribution) says the clock rate is 567 MHz. But it could be lying. > > Is there a way (through /proc or /sys) that I could determine the > setting of PLL1_PLLM from my Linux application? (There! I've > successfully managed to pull this TI/DSP specific question into the > realm of davinci-linux-open-source). > > --wpd > > > ------------------------------ _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
