Hi,
I'm trying to get a RAMDISK on the DVEVM.
When using the BusyBox v1.00-rc3 that came with the DVEVM all works fine.
When using BusyBox v1.7.2 I get the following: (Any Ideas?)
Lease of 192.168.0.136 obtained, lease time 86400
deleting routers
route: SIOCDELRT: No such process
adding dns 67.17.215.132
adding dns 67.17.215.133
adding dns 67.17.215.134
failed (1: ).
Starting hotplug subsystem:
pci
pci [success]
usb
usb [success]
isapnp
isapnp [success]
ide
ide [success]
input
input [success]
scsi
scsi [success]
done.
INIT: Entering runlevel: 3ortmap
Starting internet superserver: inetd.
INIT: Id "con" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel
INIT: Id "con" respawning too fast: disabled for 5 minutes
INIT: Id "con" respawning too fast: disabled for 5 minutes
===================================
Following is the full trace from boot:
===================================
TI UBL Version: 1.12, Flash type: NAND
Booting PSP Boot Loader
PSPBootMode = NAND
Starting NAND Copy...
Initializing NAND flash...
Valid MagicNum found.
NAND Boot success.
DONE
U-Boot 1.3.0-rc2-g527c80f0-dirty (Oct 15 2007 - 09:43:06)
DRAM: 256 MB
NAND: 64 MiB
In: serial
Out: serial
Err: serial
ARM Clock : 297MHz
DDR Clock : 162MHz
---MAC testing---
Can't overwrite "ethaddr"
ETH PHY : LXT972 @ 0x01
Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x304000, size 0x233c00
2309120 bytes read: OK
Loading from NAND 64MiB 1,8V 8-bit, offset 0x104000
Image Name: Linux-2.6.21-cBass-0.1-g9f72b935
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1578832 Bytes = 1.5 MB
Load Address: 80008000
Entry Point: 80008000
Automatic boot of image at addr 0x80200000 ...
## Booting image at 80200000 ...
Image Name: Linux-2.6.21-cBass-0.1-g9f72b935
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1578832 Bytes = 1.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing Linux.............................................................
............................................ done, booting the kernel.
Linux version 2.6.21-cBass-0.1-g9f72b935 ([EMAIL PROTECTED]) (gcc version 3.4.
3 (MontaVista 3.4.3-25.0.30.0501131 2005-07-23)) #97 PREEMPT Wed Oct 17 14:22:42
MDT 2007
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: DaVinci EVM
Memory policy: ECC disabled, Data cache writeback
DM6443
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
Built 1 zonelists. Total pages: 28448
Kernel command line: console=ttyS0,115200n8 ip=dhcp root=/dev/ram0 rw initrd=0x8
5000000,16M mem=112M
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 112MB = 112MB total
Memory: 93824KB available (2992K code, 258K data, 128K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
DaVinci: 71 gpio irqs
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
musb_hdrc: version 2.2a/db-0.5.2, pio, host, debug=0
musb_hdrc: USB Host mode controller at c7800000 using PIO, IRQ 12
musb_hdrc musb_hdrc: MUSB HDRC host driver
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 16384K
Initializing DaVinci McBSP system
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered (default)
VIDEO_MODE: NTSC_COM
Console: switching to colour frame buffer device 90x30
usb 1-1: new full speed USB device using musb_hdrc and address 2
usb 1-1: configuration #1 chosen from 1 choice
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x1c20000 (irq = 40) is a 16550A
RAMDISK driver initialized: 1 RAM disks of 32768K size 1024 blocksize
TI DaVinci EMAC: MAC address is 00:0e:99:02:55:0b
TI DaVinci EMAC Linux version updated 4.0
TI DaVinci EMAC: Installed 1 instances.
netconsole: not configured, aborting
Linux video capture interface: v2.00
DaVinci v4l2 capture driver V1.0 loaded
i2c /dev entries driver
TLV320AIC23 I2C version 1.8 (10-Feb-2006)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
hda: TOSHIBA MK4032GAX, ATA DISK drive
ide0 at 0xe10661f0-0xe10661f7,0xe10663f6 on irq 22
hda: max request size: 512KiB
hda: 78140160 sectors (40007 MB), CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2
ide0: BM-DMA at 0xe1066000-0xe1066007, BIOS settings: hda:pio, hdb:pio
usbmon: debugfs is not available
mice: PS/2 mouse device common for all mice
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Sending DHCP requests .., OK
IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.0.135
IP-Config: Complete:
device=eth0, addr=192.168.0.135, mask=255.255.255.0, gw=192.168.0.1,
host=192.168.0.135, domain=, nis-domain=(none),
bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath=
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 128K
INIT: version 2.85 booting
0
Mounting a tmpfs over /dev...done.
Creating initial device nodes...done.
0
Starting mounting local filesystems: mount none on /var/run type tmpfs (rw)
none on /tmp type tmpfs (rw)
Setting up IP spoofing protection: rp_filter.
Disable TCP/IP Explicit Congestion Notification: done.
Starting network interfaces: ip: RTNETLINK answers: File exists
udhcpc (v1.7.2) started
Sending discover...
Sending discover...
Sending select for 192.168.0.136...
Lease of 192.168.0.136 obtained, lease time 86400
deleting routers
route: SIOCDELRT: No such process
adding dns 67.17.215.132
adding dns 67.17.215.133
adding dns 67.17.215.134
failed (1: ).
Starting hotplug subsystem:
pci
pci [success]
usb
usb [success]
isapnp
isapnp [success]
ide
ide [success]
input
input [success]
scsi
scsi [success]
done.
INIT: Entering runlevel: 3ortmap
Starting internet superserver: inetd.
INIT: Id "con" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel
INIT: Id "con" respawning too fast: disabled for 5 minutes
INIT: Id "con" respawning too fast: disabled for 5 minutes
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com _______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
