Thanks Arie, this looks useful. I will extend it for the registers I need and let you know how it goes. Euan
-----Original Message----- From: Arie Muijnck [mailto:[EMAIL PROTECTED] Sent: 22 November 2007 10:47 To: Cochrane, Euan; Davinci-Linux-Open-Source (E-mail) Subject: RE: dump register settings Try the attached file (runs on the command line on a DaVinc board), extend where needed... Kind regards, Arie de Muijnck Senior Design Engineer Optelecom-NKF B.V. Zuidelijk Halfrond 4 2801 DD Gouda The Netherlands Tel. +31 182 592 418 Fax. +31 182 592 123 www.optelecom-nkf.com -----Original Message----- Hi, How do you dump the register settings of the DVEVM? I am specifically trying to check the registers involved with video output. Thanks, Euan -------------------------------------------------------- CONFIDENTIALITY NOTICE - This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify Arie Muijnck by telephone or [EMAIL PROTECTED] and delete the original transmission and its attachments without reading or saving in any manner. _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source