HI all:
I am developing on TI DaVinci 6446EVM board, I made a root filesystem by
busybox before, and the small filesystem can be made to JFFS2 image, copy it
to my NOR flash, and booting as JFFS2 successfully.
But when I change the flash to NAND mode from NOR mode on my DaVinci board,
use the same root filesystem, and make it to YAFFS2 image, then copy it to NAND
flash, it boot failde, the error infomation is below:
----------------------------------------------------------------------------------
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
block 415 is bad
VFS: Mounted root (yaffs filesystem).
mount_devfs_fs(): unable to mount devfs, err: -2
Freeing init memory: 132K
Warning: unable to open an initial console.
Kernel panic - not syncing: No init found. Try passing init= option to kernel.
-----------------------------------------------------------------------------------
Is there somebody have encountered the problem, please give me some
suggestion, thanks
BESTREGARDS
Steven
_________________________________________________________________
手机也能上 MSN 聊天了，快来试试吧！
http://mobile.msn.com.cn/
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
